Displaying 20 results from an estimated 6000 matches similar to: "IAXTel registration rejected"
2003 Oct 23
6
Problems with * and IAXTel/FWD
Hi all
I've been trying to make * work with IAXtel to no avail, all seems ok in
the config but am not getting anywhere
This is what I'm getting from console (user/pass/dest # changed for
obvious reasons):
DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT
on RTP to 0
DEBUG[1133735216]: File chan_sip.c, Line 4891 (handle_request): Check
for res for phone1
2004 Jan 30
2
IAX1 vs IAX2 for IAXtel
G'day list,
I am getting a lot[1] of traffic on my Internet link, ICMP messages from
69.73.19.178 telling me UDP port 5036 is unreachable (this IP address
belongs to iaxtel.org).
I see from the wiki that IAXtel supports only IAX2 from December 2003.
Fine, however it looks like my * still wants to try and register using
IAX1, and I can't find how to turn this off.
This situation is
2003 Oct 13
4
IAXTEL/ Dial problem
Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are.
CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack
-- Calling using options
2003 Sep 16
1
Using IAXTEL with RSA authentication. MD5 works, RSA not. [2]
[ Sorry, I incorrectly copied some Reference headers into this post
and tacked it onto the wrong thread. -Steve ]
So far, I have been able to receive incoming iaxtel calls via my
assigned 1-700-xxx-xxxx number, but only when using md5
authentication in iax.conf:
[iaxtel]
type=user ; Incoming calls only
context=incoming
auth=md5
secret=<mysecret> ; Required for
2003 Aug 17
2
no incoming packets & Sound: Recording overrun
On Sun, Aug 17, 2003 at 03:44:21AM -0500, Gnophone Support wrote:
> Hello, and thank you for registering at gnophone.com. Your login
> information is listed below:
>
> Username: miernik
> Password: *******
> IAX Phone Number: 17002916107
>
> Please login as soon as possible to
> http://x.linux-support.net/directory/ to complete the
2005 Feb 21
1
why can't I make toll free calls via IAXTEL
<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT:
blue 2px solid">
<DIV>Hello,</DIV>
<DIV> can someone tell me what's wrong with this? I can't make toll
free calls via iaxtel. Here's the definition in my extensions.conf</DIV>
<DIV> </DIV><FONT size=2>
<DIV>[iaxtel-trunks]</DIV>
2003 Sep 11
1
Incoming calls from IAXTEL over NAT
Hey all,
I was playing around with IAXTEL last nite and have
outgoing calls working a treat. I'm sure I woke a few
people up in the US with my annoying test calls. :)
Anywayz, incoming calls are a different matter. I have a
NAT firewall my * box is sitting behind and the server
'appears' to have registered correctly with IAXTEL. Thing
is, when I try and call my 1700 number
2004 Jun 21
1
IAXTel Help
I've searched WIKI and Archives but nothing.
Im getting:
-- Called username:password@iaxtel.com/1800somenumber@iaxtel
Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call
rejected by 69.73.19.178: Unable to negotiate codec
-- Hungup 'IAX2[Iaxtel]/8'
== No one is available to answer at this time
-- Executing Hangup("SIP/104-b8eb", "")
2004 Jul 13
2
IAX2 calls through IAXTEL.com
I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls
through. IAXTEL.com gave me a number (example) of 700-555-6226. I have
made the following changes to my:
/etc/asterisk/extensions.conf:
[iaxtel700]
exten =>
_81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})
exten =>
_81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})
2003 Aug 12
1
Working with FWD, IPTel, SIPPhone?
I'll admit it. I'm a asterisk newbie (but no stranger to telephony).
The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone
specials) on a private segment calling to a Linux box acting as the
segment's firewall with a leg on our public network. The phones are
setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks
to the Asterisk HOWTO).
Getting IAX
2005 Jan 21
3
IAXTEL is dead/dying?
I didn't get any response at all to my last "request for status" on
IAXTEL.
So, when this happens, I attribute it to one of a number of things:
1. No-one knows.
2. No-one cares.
3. Everyone knows, but are too busy to reply.
At any rate, my investigative side kicks in and I began searching thru
the digest's I've gotten, looking for references to IAXTEL. Mostly it is
2003 Dec 23
1
turning off IAX registration attempts
I have, in iax.conf the register statement:
register => username:password@iaxtel.com
This causes registration attempts to iaxtel.com for both IAX and IAX2.
Every once in a while there is a packet for port 4569 keeping the IAX2
registration alive. This is fine.
But, I have a barrage of registration attempts to iaxtel on port 5036 for
IAX. Every UDP packet is answered with an ICMP packet
2003 Oct 14
1
IAXTEL - Problem Configuration.
Ok folks I have another question. So far I have gotten my IAXTEL number and I have been able to make calls from my asterisk system to any IAXTEL number and even to FWD numbers. I also got FWD to work and I now can get calls to my main system. It's great when these things work. But when I call my own IAXTEL number 17005441100 all I get is a message saying the user is un registered or un
2004 Dec 26
7
IAX Registration Refused
I tried to connect my * to IAXtel, but i always get this errors.
chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected:
Registration Refused
On dial a iax number i get:
chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority
found
chan_iax2.c:5528 socket_read: Immediately destroying 3, having received
reject
chan_iax2.c:2411 iax2_hangup: We're hanging
2003 Dec 06
4
IaxTel seems down
Is anyone other than me having trouble dialing out via IAXTEL? I havn't
changed my config files in weeks but seems that IAXTel calls (800 and FWD)
stopped working in the past week sometime.
Robert
2003 Nov 11
5
iaxtel down?
Hi there,
do I have a local problem, or is registration at IAXTEL impossible at the
moment? "iax2 show registry" permanently shows a TIMEOUT for
69.73.19.178.
Philipp
2004 Dec 21
2
IAXTEL Configuration
I signed up for an IAXTEL account and have been trying, unsuccessfully,
to get it working. In IAX.CONF I have:
[iaxtel_out]
type=peer
host=iaxtel.com
username=USERNAME
secret=SECRET
auth=rsa
inkeys=iaxtel
[iaxtel]
type=friend
context=incoming
host=iaxtel.com
auth=rsa
inkeys=iaxtel
However, when I start Asterisk, I get the following warning:
[chan_iax2.so] => (Inter Asterisk eXchange
2005 Jan 17
2
iaxtel - -- Format for call is ADPCM
When I try to call iaxtel it goes to codec ADPCM even though I have
define in iax.conf gsm
Call accepted by 69.73.19.178 (format ADPCM)
-- Format for call is ADPCM
My settings:
[general]
port=4569
register => xxxx:xxxx@iaxtel.com
bandwidth=high
jitterbuffer=no
tos=lowdelay
[voipjet]
type=peer
host= xxx.xxx.xxx.xx
secret= xxx
auth=md5
notransfer=yes
context=incoming
disallow=all ;
2003 Oct 24
1
IAX CALLS ONCE MORE
Hello,
I updated CVS and nobody can call me any more with my IAX number 17007591228.
I can only call other number but nobody can call me.
This is what I get on debug when I call myself:
-- Executing Dial("SIP/1011-7424", "IAX/bartosz:password@iaxtel.com/17007591228@iaxtel") in new stack
-- Calling using options
2003 Sep 22
3
iaxtel and iax.conf
I have tried for over a month off and on to get iaxtel for inbound to
work... and tonight after alot of troubleshooting we noticed this:
iaxtel inbound will use the last entry in your iax.conf to auth against.
So if [iaxtel] is at the top and say [voicepulse] at the bottom. An
inbound call will try to auth against that [voicepulse] entry even with
the [iaxtel] entry at the top of the file. Has