similar to: Possible FAQ: IAX2 -> SIP with G729 and no licence

Hi, I carefully followed instructions in README file lasting with : /root/register ... blabla asterisk -r CLI> restart now Then asterisk -r fails with : # asterisk -r Asterisk 1.6.1-beta4, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster at digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is

Hello all, I am running Asterisk 1.4.17. I have 2 Linksys SPA3102's and one PAP2-NA (I have a second on order). They have G729a built into them. This is supposed to be compatable with G729. I was trying to have them use that codec when they talk to each other, but it seems they always switch to alaw or ulaw (depending on my sip.conf file). Shouldn't they be able to use G729a in

I haven't been able to find the answer online, and am not currently able to conduct an experiment to find the answer... I understand that in a SIP call where G729 has been negotiated as the preferred codec, a G.729 licence is not consumed until there is a need to perform transcoding, e.g. play a non-g729 sound, or do voicemail, or enter a Meetme, etc. What happens when a SIP call in progress

2009/1/27 Olivier <oza-4h07 at myamail.com> > > 2009/1/27 Olivier <oza-4h07 at myamail.com> > > Hi, >> >> I carefully followed instructions in README file lasting with : >> /root/register >> ... blabla >> asterisk -r >> CLI> restart now >> >> Then asterisk -r fails with : >> # asterisk -r >> Asterisk

Hi all: I've just purchase some licences of G.729 codecs, and I like to bring up * using /etc/rc.d/init.d script. Does anyone knows how to start in the "old" way? Thanks in advance, Gus -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031016/6dd07c4b/attachment.htm

Hi, One of the key features of Asterisk is that we can install it on many hardware platforms. We've done our best to script this installation process, so that, in case of hardware failure, we can re-install Asterisk on another platform. The question I have is how can we adapt our process so that Digium's G729 licences (or other licenced software) could be installed without asking too

Hello Everybody, Since I upgraded to 1.4 I always get the difficulties as below, which I have never had in 1.2: [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Call accepted by 202.153.128.34 (format g729) [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Format for call is g729 [Dec 28 21:06:00] VERBOSE[1756] logger.c: -- IAX2/VoIPRakyat-2 is ringing [Dec 28 21:06:00] DEBUG[1756]

Just a short question: I will have Asterisk using G.729 codec and connected to some voip devices such IP phones (GarndStream) and a GSM gateway (Portech). Do IP phones and GSM gateway include valid G.729 licenses or do I have to pay for them ??? Thanks a lot Alejandro -------------- next part -------------- An HTML attachment was scrubbed... URL:

20.07.2018 23:35, John Kiniston пишет: > > On Fri, Jul 20, 2018 at 11:41 AM Saint Michael <venefax at gmail.com > <mailto:venefax at gmail.com>> wrote: > > ​The community would benefit if a non/licensed version of G729 > would be included with Asterisk​, since the license expired. > The current codec source code posted still requires

With chan_sip there is the variable SIP_MAX_FORWARDS to set Max-Forwards. This counter is persistant after a redirect. I can't find the equivalent for PJSIP, so I went the way of header manipulation. Only to find out that any headers added to the outbound leg are lost after a redirect (with redirect_method=uri_core (didn't try any other since in the past they didn't work for me)). Am

Hi, Do the g729 codec licenses for Asterisk work on a SIP environment (only SIP UAs running g729 + Asterisk)? I would like to buy a couple for a SIP test lab but I have not found any documentation on wether it works for SIP UAs or not. The Digium page only mentions: "The G.729 codec works with all Digium cards." Can somebody tell me please? Thanks, Ricardo Villa

Hello, I?m trying the g729 codec for testing pourpose. Whe I try to make a SIP call from a phone using g729 codec to another phone using another codec, when the destination phone answer, the call hangs up. this happend in both ways. In the asterisk console I get. Mar 4 13:11:35 NOTICE[24572]: channel.c:1724 ast_set_write_format: Unable to find a path from gsm to g729 What does it mean?

Hi All, I have been trying to get the Solaris version of the G729 codec to work with asterisk 1.2.17 and 1.2.22. However, I come up against the very same error every time I try to install it. Has anyone out there seen this error, taken from the asterisk console straight from startup: [codec_g729a.so] => (Annex A/B (floating point) G.729 Codec (optimized for i386)) Jul 19 14:11:23

Hi, I am still toying with the idea of going ahead with using the G.729.. Can those using it tell me about some of your experiences using G.729.. Things like and problems you had running it, the voice quality and anything else you can think of... I have read in the archives that asterisk has to be run with -c.. Is this still the case? and if so does this mean that * can't be run using the

I am looking to install a web interface for Asterisk to transfer calls and look who's on the phone. If anybody has a working web interface please let me know. I installed the www.asternic.com (operator) But when I bring up my web browser it says transferring data and does not bring a browser. -----Original Message----- From: asterisk-users-admin@lists.digium.com

I Purchased 4 licences for my SCSI only machine. I do have a CDROM - with a mounted CD. The Registration binary gives me a 'Segmentation Fault'. Is this like telling me I can't register the licence? Unfortunately - I only seriously scanned the mailing list after buying the keys.... Seems like the licence insists on using an IDE drive to create some sort of unique serial number.. Has

Does anybody know why Asterisk does not support inband DTMF for G.729? Our SIP carrier use inband dtmf for G.729. This causes problem for us to use it for our Asterisk IVR system. Any suggestion to solve this problem? Gary -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070622/43308a1f/attachment.htm

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

Hi there, Here at my company we are willing to use the asterisk IVR system. The problem we are having rigth now is that all our GWs use G729. I've read that in order to asterisk be able to make transcoding from the GSM audio files to G.729, it is necesary to purchase a license from digium. Is this correct? I've seen that licenses are purchased on a per-channel basis. Could

Hi I am trying to make this setup work phone1---g729---asterisk1---sip---asterisk2---g729---phone2 I have tried several configurations but none worked I keep getting transcoding errors I have installed one g729 licence on each asterisk, but I can't verifiy because the show g729 command is not available, I use 1.2.17 Do I need 2 g729 licences per asterisk ? Do I need to register