similar to: core dump back trace of chan_oh323

Hi, I use ext3 over RAID1+0 LUN. When I disconnect my fiber cable to the RAID (in order to force a migration to a failover node) I expect to see I/O errors and then a failure to write/read to the filesystem, but in addition I get an Assertion failure. The end result is of course an unusable system which needs to be rebooted. (I reboot the system via machine_restart which works okay but I guess

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Hi! Samba 2.2.4, Linux. smbd loses connection to the PDC - although rest of organization feels fine... I've had the following cropping up: Jul 25 07:40:13 10.17.0.2 smbd[6994]: [2002/07/25 07:40:13, 0] lib/fault.c:fault_report(38) Jul 25 07:40:13 10.17.0.2 smbd[6994]: [2002/07/25 07:40:13, 0] lib/fault.c:fault_report(39) Jul 25 07:40:13 10.17.0.2 smbd[6994]: Please read the file

Hi, > chan_oh323.so: undefined > symbol: __use_ast_pthread_create_instead__ is not a bug, it's a hint: use "ast_pthread_create" instead [what your were using] and means: replace in asterisk-oh/asterisk-driver/chan_oh323.c at line 3764 "pthread_create" by "ast_pthread_create" Roger.

Hi, I have 2 h323-gateway (clarent-h323 & cisco AS5x00-h323) with different fastStart/h245Tunneling mode configuration. I'm using fedora core 1 with - asterisk-1.0.9 - asterisk-oh323-0.6.6 Anyone know how to configure oh323.conf with multiple h323-gateway ? regards, __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam

I'm trying to install asterisk PBX with openH323 support. I installed all the packages ( Pwlib, openH323 and openH323 gatekeeper) from source successfully. i also installed the wrapper ( http://www.inaccessnetworks.com/projects/asterisk-oh323 ). However when i try to start asterisk i get the following errors... ARNING[1024]: File loader.c, Line 212 (ast_load_resource):

a) jerjers been doing a lot commendable work for * b) support is not mandatory, and i agree with royk it should not be withheld based on political viewpoints, that's pointlessly draconian c) choice is always good, so people should have the option of oh323 or h323, let them decide, and not limit them, unless astmaster chooses to limit them, and that too based on valid points d) jerjer gave a

Hi all, I want to install h.323 support for *, but when I launch * from shell command asterisk -vvvc I have the next error screen: [chan_oh323.so]WARNING[1024]: File loader.c, Line 226 (ast_load_resource): liboh323wrap.so: cannot open shared object file: No such file or directory WARNING[1024]: File loader.c, Line 394 (load_modules): Loading module chan_oh323.so

My apologies if this question has been answered previously. However, I found that it was nearly impossible to search and find since anything can cause a segmentation fault. Problem. When Asterisk is booting up the h323 modules and a client tries to connect before Asterisk/h323 is finished booting, the program seg faults out and doesn't load. I thought about putting this into the inittab,

Hello all, I have a cisco AS5300 which is register with a gatekeeper and a Asterisk server also register with the gatekeeper. PSTN ---->AS5300 ---->Gatekeeper ---->Asterisk I set up a conference room on the Asterisk sever (Room No 1234). I try to call from PSTN to AS5300, The AS5300 will call the Asterisk server through the gatekeeper. I manage to get to the start of the conference

Hi, I've got a big delay between the caller and the callee. I use asterisk-oh323 drivers how can I configure oh323.conf in order to have the best delay ? Thanks Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030908/aa7acd32/attachment.htm

hey people, i've installed an asterisk version on my Linux Distribution. Then i wanted to compile the packages for H323 support. The openh323 and pwlib libraries compiled without any error. But at least i got one in /~/asterisk-oh323-0.5-10/asterisk-driver/chan_oh323.c in Line 1128. Too many aruments caused this error. Is anybody able to say why and how can i solve thsi problem? Kindly Regards

Hi, I have asterisk connected to PSTN via H.323 gateway via chan_oh323. Incoming calls to SIP extensions work, but SIP message "486 busy here" from a busy extension isn't correctly forwarded to H.323. As a result, a caller from the H.323 side calling a busy SIP extension gets some rings and then an irritating timeout with H.323 message 'no user responding' instead of

Hi, Our gateway has asked that we send DTMF as RFC 2833. Although chan_oh323 seems to do this, it doesn't specify the DTMF mode during the H323 setup headers. Is there an easy way around this? Thanks, Andrew

Hi, I have a communication partner who needs G.729. When I disable in oh323.conf all codecs except G.729A, everthing is fine, except that I can't receive calls with other codecs from other partners via H.323. That's why I enabled also GSM and G.711 in oh323.conf and put a SetVar(OH323_OUTCODEC=g729) in my extensions.conf for that partner. Now I see in the console log: -- Executing

I have asterisk version 1.0.0,have comipled pwlib version 1.5.2 ;and openh323 version 1.12.2.When I try to build asterisk-oh323 version 0.5.9 or 0.5.10 ,I get the following error : make[1]: *** [chan_oh323.o] Error 1 make[1]: Leaving directory `/usr/src/asterisk-oh323-0.6.2/asterisk-driver' make: *** [subdirs_all] Error 1 I thought that there might be some linking problem,so I searched

I am trying to figure out the correct way to send my E.164 ID with chan_h323 and or chan_oh323 as my H323 provider requires this in the format of 'account-pin'. With chan_oh323 I have been able to register with the gatekeeper and can recieve incomming calls, but outgoing calls do not work. With chan_h323, I can call H323 clients (netmeeting, ATAs etc) but cannot place a call through my

I have a customer who wants to do large volumes of H.323 to H.323 hairpinning. We haven't tested this scenario for large volumes before; maybe someone on asterisk-users has. If they buy a top of the line PC, how many concurrent calls are we likely to get? Routing logic will be simple, the machine won't be doing anything else, and let's assume no transcoding for now. We're not

i've compiled openh323 (from openh323-Janus_patch4-src.tar) and pwlib( from pwlib-Janus_patch4-src.tar) .... but when i tried to compile asterisk-oh323-0.7.1... it gave error like that there is no member "cid" in structure ....( chan_oh323.c ) .... can anyone help me to resolve this problem __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail

we got this installation : WinSip(demo version) -> ser(radius accounting) -> asterisk(from sip to h323 channel) -> gsm gateway(with 32 sims in it) we configured winsip to make 28 calls like from 28 different sip accounts, to 28 different cellular phones numbers after the first ten : -- Executing Dial("SIP/5060-081925b0", "OH323/33xxxxxx@gsm.gateway.ip") in