similar to: chan_h323 as a gatekeeper?

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

hi all after setting up chan_h323, I don't get any ring indications on my Dlink DPH-100H phone. Any idea how to debug this? roy

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

hi just after talking to Jeremy, I downloaded the source he's using and compiled. core dump! This was without gatekeeper: (gdb) bt #0 0x40141118 in mallopt () from /lib/libc.so.6 #1 0x401400fc in malloc () from /lib/libc.so.6 #2 0x405e981b in PAbstractArray::SetSize(int) () from /usr/src/pwlib/lib/libpt_linux_x86_r.so.1 #3 0x405ed006 in PString::SetSize(int) () from

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

I have one and only one reason to use OH323, and that is it works with Cisco's CallManager. The standard H323 channel has one-way audio issues when connected to CCM and fixing them has been identified as a low priority/never going to happen task. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Dear ALL: I find that everybody discuss with asterisk-oh323 instead of chan_h323 of asterisk channels. Why do they choose asterisk-oh323 and not use the build-in module (chan_h323)? What different between these two componments? In my guess, the build-in module should be easy to implement rather than setup another application(asterisk-oh323) expect some bugs or failed functions on chan_h323.

hi, i had asterisk and gnugk running on fedora core 2. it worked quite well. then, i needed to change to red hat 9, and i'm experiencing troubles with h.323 :-( making a call from a h.323 phone (innovaphone) does not work, and dial-in also doesn't. below is an excerpt of what happens, when i try to dial-in my extension (126). it takes about 10(!) seconds, until the 'Called 126'

hi seems like things are closing in to something that might look like success. I have one problem left: I don't get ring indicator when I dial out from the h.323 phone... Sound is good, so it doesn't look like a codec problem. I'm using chan_capi with early B3. I also use gnugp to route the calls from the phones to asterisk, as the dlink dph-100h requires this. Debug output follows:

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Ok, I've managed to get inbound and outbound calling to work with chan_h323 and gnugk. A few questions: 1) if I do a reload in *, chan_h323 loses its registration with gnugk, and will no longer pass calls to it. A second reload will crash *. Is this supposed to be? 2) For a configuration in h323.conf like: [office] type=h323 prefix=9 context=outbound I get a message saying:

Current setup: Polycom IP3000 <-> gnugk <-> asterisk <-> Cisco 7940 Asterisk and gnugk are on 10.20.98.6 IP3000 is H.323, using G.711 (10.20.98.2) 7940 is SIP, using g711ulaw (10.20.98.3) I've been asterisk for a while now, only using SIP devices. I'm happy with that side of things, but I've not used H.323 before this week, in trying to get the IP3000 to work. *

Actually I am facing a problem with H.323 (the standard and the ooh323) with Asterisk vesion 1.4.25 and I discover the following: 1) Using the standard h323 that come with Asterisk: The chan_h323.so it is not existed in the /usr/lib/asterisk/modules after doing the compilation and installation for (pwlib, openh323, /chanels/h323, asterisk), although make menuselect was done and the h323 channel

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

Hi, I have the following topology: PSTN/H323 gateway->GNUGK->chan_h323/chan_sip->SIP EP Mostly everything works fine except chan_h323 is not passing audio from PSTN before the call is answered and as a result users can't hear PSTN announcements (like "the number is not in service") that's played on unanswered call. All they hear is just continuous ringtone as though

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received from the gatekeeper. so instead of duplicating a

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

I'm having a problem with chan_h323 compiling for Asterisk. RedHat 7.3 PWLIB 1.4.11 pwlib_1.4.11.tar.gz OpenH323 1.11.7 openh323_1.11.7.tar.gz [asterisk@jonux h323]# make clean rm -f *.o *.so core.* [root@jonux h323]# make cc -g -pg -c -o chan_h323.o -pipe -Wall -fPIC -Wmissing-prototypes -Wmissing-declarations -DP_LINUX -D_REENTRANT -D_GNU_SOURCE -march=i686 -DPBYTE_ORDER=PLITTLE_ENDIAN