similar to: Re: Asterisk-Users digest, Vol 1 #1273 - 10 msgs

All, I know you can use, say, a 2620 w/2 port FXO card as a SIP gateway. Clearly you can use the 5300, 5800, and MGX8850 too. Does anyone know which cards, if any, exist for a 7206VXR to act in a similar capacity, either as a T1/PRI, DS3, or POTS FXO/FXS? What other Cisco routers can act as SIP gateways today? Thanks, Dave

John Todd wrote.... > Cisco has an 802.11 phone called the 7920, which is apparently > shipping now. It is very expensive (>$550 USD) and only runs SCCP at > the moment, which is Cisco's proprietary VoIP protocol. However, if > it falls in line with some of Cisco's other high-end VoIP equipment, > that means it should have a trailing-edge SIP image running by

----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Saturday, September 13, 2003 7:55 PM Subject: Asterisk-Users digest, Vol 1 #1279 - 16 msgs > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

During debugging of H323 trunk side (using Jeremy Macnamara's H323 driver in ~/channels/h323) a couple of things come don't quite work as advertised... 1/ the following line in extensions.conf explicitly sets the outgoing caller ID (required in my case for downstream GK processing..) exten => _1NX.,1,SetCallerID,6400047602100 exten => _1NX.,2,Dial,H323/${EXTEN:1} what

From the thread..... > Subject: Re: [Asterisk-Users] IAX <> IAX trunking... DP cache? > Date: 20 Aug 2003 11:29:59 -0600 > From: Steve Meyers <steve-asterisk@spamwiz.com> > >>Brian West wrote: >> >>>I would use the latest CVS for one. And try again. >> >>Unfortunately, I've tried numerous times to get a current CVS trunk

John Todd wrote.... > For those of you wanting to salvage your Cisco ATA-186 after > inadvertent locking, or after recovering your devices from a vendor > who has locked them, here is a rainy-day project for you: > somedoc.pdf..... Immediately strides to ATA, rips off cover... woohoo, EEPROM is socketed.... well maybe I'll just copy the contents of a working ATA into the

I have successfully built and made asterisk talk SIP extension to SIP extension, read all the docs, and about 1000 emails from the archive. The trunk side of Asterisk, from the docs perspective, is a smidgin TDM-centric, Analogue, T1, zaptel.conf etc..... Asterisk cares not about the externally presented digits as the telco KNOWS which time-slot or analogue line the call came from I live in an

Hi! I'm just now preparing the first, still very experimental (way pre-1.0) release of a new archival tool, similar to (and based on) zip/unzip, with the difference that the enhanced zip tool can store x86-based decompressor code fragments in archives along with the compressed data, which the unzip tool runs in an isolated user-mode virtual machine in order to extract the data. The main

Hello: I am testing Asterisk with oh323. My question is: can Asterisk route some calls thru a second h323 gateway (a h323 <-> PSTN gw)? - Asterisk ip: 192.168.1.10 - h323<->PSTN gw: 192.168.1.20 I've tried: exten => _9XXXXXXXX,1,Dial(OH323/192.1.1.20) or exten => _9XXXXXXXX,1,Dial(OH323/BYEXTENSION@192.1.1.20) but it does not work at all. If my h323 client

Hi, Hi, I have been googling, and can't find anything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892:

Should I expect a standard fax machine connected to an ata-188 connected to an asterisk server, connected to a pri fed from a cisco 7206vxr to work correctly? It needs to have a standard fax machine, receiving and emailing it won't be acceptable. Thanks dave -- Dave Weis "I believe there are more instances of the abridgment djweis@sjdjweis.com of the freedom of the

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

asterisk-users-request@lists.digium.com wrote: >Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users >or, via email, send a message with subject or body 'help' to > asterisk-users-request@lists.digium.com > >You can

https://bugzilla.netfilter.org/show_bug.cgi?id=1273 Bug ID: 1273 Summary: hashlimit never appears to fail to match under 4.9.x Product: netfilter/iptables Version: unspecified Hardware: x86_64 OS: All Status: NEW Severity: major Priority: P5 Component: ip_tables (kernel)

http://bugzilla.mindrot.org/show_bug.cgi?id=1273 Summary: Interactive mode detection should not be predicated on pty allocation Product: Portable OpenSSH Version: v4.5p1 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 Component: sftp-server AssignedTo:

CentOS Errata and Bugfix Advisory 2012:1273 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1273.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9acc09b48630968453d433afb1be68900883be0509dc45fd8faf1c2dc2003d61 cdrskin-0.7.0-2.el6.i686.rpm 5baa1ca51a47a4d60948ea8e82264d3d774815564cf121734417f20900fa0e8b

CentOS Errata and Security Advisory 2013:1273 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1273.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c7bc8814163e0390fbba942451f909fd2219a985e6d7d80e20406337df9f53d7 spice-glib-0.14-7.el6_4.3.i686.rpm

https://bugzilla.mindrot.org/show_bug.cgi?id=1273 Tim Connors <tim.w.connors at gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tim.w.connors at gmail.com --- Comment #6 from Tim Connors <tim.w.connors at gmail.com> 2011-10-10

http://bugzilla.mindrot.org/show_bug.cgi?id=1273 Damien Miller <djm at mindrot.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX CC|

Full_Name: vinod rajakumar Version: R-1.4.0 OS: Solaris 5.8 Submission from: (NULL) (66.9.157.2) my machine looks like: SunOS 5.8 Generic_108528-07 sun4u sparc SUNW,Sun-Blade-1000 (64-bit) I downloaded the zipped R-1.4.0 files into $HOME/dwnlds, unzipped, un-tar-ed, and ran the following: export MAKE=gmake export CC = gcc ./configure --prefix=$HOME/sfw/R gmake and here's where it