similar to: Auto-detect of fxo vs. fxs channels?

Hi all, I bought a Sangoma A200 card from an online supplier and explained exactly what I wanted, 3 incoming phone lines to PBX and a life line (some where to connect a standard BT phone to the PBX incase the power goes, making the BT phone ring). I was told to order 1 x FXS module (2 FXS ports) 2 x FXO modules (4 FXO ports) However being a complete noob, I have connected the 3 lines to the

We're having issues with the FXO/FXS ports on our Digium TDM cards sporadically. I'm wondering if anyone else has had these problems, or if anyone can provide guidance diagnosing or fixing the issue? The symptoms are that the FXO and FXS ports "stop working", usually after 2-4 weeks of server uptime. When this happens, sending a (SIP) call to an analog phone on an FXS port

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Hello, I've recently purchased Adit 600 with 3FXS and 1FXO to be connected to my * server via T100P card. This is the output of "status equipment" command in the Adit600: For some reason the FXO card is seen as FXS, why? Is it ok? On the card it is written "FXO". Regards, Shlomi Bachar -------------- next part -------------- An HTML attachment was

Thanks. Is there a way I can log into the Merlin Magix to determine that? How else do I tell? ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Germann Sent: Monday, February 05, 2007 8:16 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users]

Please explain the relationship between modules from the driver (wctdm), the /etc/zaptel.conf file and zapata.conf. Specifically, if I have a FXS module 0 and FXO module 1, what should be used in zaptel.conf and what should be used in zapata.conf? Then finally, in extensions.conf, what is the Zap channel for dialing out? Zap/? % dmesg Module 0: Installed -- AUTO FXS/DPO Module 1:

Hello everyone, I'm trying to set up a Asterisk server. I have two cards - one is an BeroNet BN2S0 with two ISDN lines (4 channels): http://www.adcomtec.com/webstore/beronet_bn2s0.php?cat=90 and a Rhino R8FXX with one FXO module and two FXS: http://www.voipsupply.com/product_info.php?products_id=2940 I would like to set up an Asterisk server with 8 phones, which will share the phone

Hi Mary Christmas to y'all ! I am trying to configure * with one TDM and one ISDN and Bri-stuff, all is ok with only TDM but when add ISDN I get following error: I have tried to switch fxs/fxo but then I get error also without ISDN, card is configured from Digium with FXS(green) modules are closest to the bracket. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget

Okay, i'll move my discuss to asterisk-users. Thank you. On 1/17/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com> wrote: > > > On Wed, Jan 17, 2007 at 04:39:03PM +0800, ??? wrote: > > Jonson Player wrote: > > > Hello, I intend to buy a FXO/FXS device from Linksys. > > > I'm thinking about SPA3102. What you guys thik about it. > > > Is ok, is

Does anyone know a good (and stable) voip gateway product with 4 ports (2 fxo and 2 fxs), with the following requirements: * being able to connect analog phones to the FXS ports, and communicate over SIP with an REGISTRAR/PROXY server (SER in our case). * being able to connect the FXO port to local office PSTN network, and dial to that office pstn number and getting an internal dialtone, or

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

I believe it will be hooked up to extension lines. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Paul Hales Sent: Monday, February 05, 2007 8:15 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] asterisk server as a voicemail server forlegacy PBX -- FXO or FXS???

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configuration: modprobe zaptel

Does the voicetronix card work with Asterisk? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of woody+asterisk@solutionsfirst.com.au Sent: Monday, February 02, 2004 11:06 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Pictures of new multiport FXO/FXS from digum > -----Original Message-----

Hello, I am having trouble passing DTMF digits from a Polycom 330 SIP phone to my FXS/FXO lines. I am running Asterisk 1.4.21.1 In sip.conf I configured dtmfmode=inband. RTP traffic (voice) goes perfectly from SIP to FXS, but in the SIP phone I only hear a continuous noise. However, when I press any digit in the pone (FXS) I hear the DTMF tone fine in the SIP phone (the noise goes away for as

If you have an FXS port and would like to attach a PSTN analog line to it this device would do the job by converting the FXS port to FXO. It's a small external device. Works well with VOIP FXS and other FXS interfaces. Interface: 2 RJ11 Jacks (one for the FXS port and one for the PSTN outlet.) Cost: $35.00 with USPS regular mail included. Power: 9 to 20V dc power supply (Not

Hy, I would want to "test" the FXO and FXS channels of a TDM400p with the asterisk. For example, when I want to Know if a sip peers is correctly register, I use ChanisAvail, but if a module FXS hasn't a phone connected, How could I Know it?. Note, that I don't want to Know if the channel ZAP is correctly configurated. This information is given for Chanisavail. Thanks for

Hi Is there a test that you can do to test your modules FXS FXO to see if they are blown I have a TDM400 with 2 FXS (green) modules on the the first two ports and 2 FXO (red) modules on the last two ports, but I can't seem to assign a channel to them. Can any one help me?? Thanx Jaco

Can I configure an Adtran channel bank with a mixture of FXS and FXO cards and have them come into a single T100P T1 card? It seems like this would be a cheaper solution than trying to load a bunch of PCI cards into a PC. Also, when shopping for an Adtran (on ebay) - what do I need to watch out for as far as interfaces or capabilities to make sure that it works with a Digium card?