similar to: TE410 - 3.3v?

Hello List Just want to check if anybody else is having this problem. Every time the PRI connections are disconnected, the card freezes, and I have to reload the driver, to make it work again. We are very seriously considering switching to Sangoma at this moment, due to this and other problems, but I want to know if there is a solution, and to make sure it isn't asterisk that's freezing

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2)

This afternoon I finally figured out more with regarding to a strange clock-slip problem we have on our asterisk box. We have two TE410s, in E1 mode: TE410P version c01a009b They have their own interrupts: 66: 781648298 783747388 IO-APIC-level t4xxp 233: 253890977 1311504670 IO-APIC-level t4xxp They have their full 31 channels: span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78

Just spended ~ hour googling - all boards are based on GC-XX or I750X Chipsets - all for Xeons. There also some boards for Pentium 3. Can someone point me to a board with 64Bit 3.3v PCI for ordinary P4 with 800Mhz FSB. Thanks

I have asterisk installed on a Dell 2850 dual-Xeon 3.0Ghz box with 2GB of memory. This is serving about 75 sip clients, Polycom500's and 600's. We are running into problems with the memory. Asterisk, right now, is using about 1.8GB of system memory. I am using Asterisk 1.0.7, Zaptel 1.0.7 with Digiums TE410 1xT1 RBS and 1xT1 PRI, Libpri 1.0.7 on Fedora Core 3. My question; is this

Hi I plan to setup an asterisk box to function as a SIP gateway forwarding lots of calls to/from a backend of several other asterisk boxes, each with a TE410 card for PSTN connectivity. It will only gateway the calls into the PSTN gateways. No transcoding is planned - only plain ALAW. How many concurrent calls would you think this can handle? I'm asked to plan a system that can handle

I'd like to put up on the wiki the known working 3.3v MotherBoards people are using in production... I am very interested w/ppl with dual te410's with lots of concurrent channels in use Please dont post just your fav spec boards JUST ppl with working stable installs with TE410s, if possible with url, if not the exact board number & ill google it when i post to the wiki thxs in

Why PCI 3.3V for E1/T1 card!? I can not use it because I can not find any motherboard with PCI 3.3 . Any sugestions!? Cristian VASILIU AccessNET International S.A. Software Programmer mail to :<cvasiliu@accessnet.ro> www:<http://cvasiliu.home.ro>

I could swear that I remember seeing some announcement somewhere that Zaptel now supported drop-and-insert across spans on a TE410P, but now I can't find it. Am I imagining this? We just got our TE410 up and running, and if we could cross-connect digital channels with it, I think we'd buy another one for the remote end (instead of using the T100P we have). Searching Google ("zaptel

Has anyone written a script that can be used as a cron job or similar that will test if Asterisk is running and if not restart it?? I have just had an issue where asterisk crashed and someone was trying to call me.. it would be nice if it could have been automatically restarted.. I was thinking of a simple bash script something like running "ps -aux |grep asterisk" and then some kind

Hello List I am having a rather big problem with a sangoma A104 card, I just installed to replace a Digium TE410 card, that was acting up. But now we have a problem with the sangoma card. It runs great after being started, and calls proceed as normal, but after about 1 hour, it stops being able to make and receive calls. If I run wanpipemon debug, can see that the card still receives

If I remove the eco cancellation module from a TE411P card, will it work as a plain TE410P? -- Carlos Chavez Prats Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: This is a digitally signed

Can anyone offer suggestion about getting readline to work on Solaris? (v1.5.1) When I use the up arrow or ctrl-p to try to repeat the last command my session just beeps. It appears that the .Rhistory file that should appear in my startup directory is not being created. Thanks! The screen shot below shows cled=TRUE and no .Rhistory file created: $ /apps/R-1.5.1/bin/R R : Copyright 2002, The

Hello, I would like to have some comparison between E1 cards from Digium and those from Eicon for a VOIP - ISDN Gateway. How does they compare on the echo cancel point of view? Is the echocancellation code for E400 good enough for production environment? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz -

I've got a handful of T1s going into a TE410. When I place calls into the system over these T1s, the system either doesn't decode all of the DTMF digits or it decodes ones that aren't there. When the system places calls out, there is no problem doing the DTMF detection. Everything works great.

I've seen this question asked before but haven't seen a definative answer. Does the e100p work in australia? Did any one who was asking the question before bite the bullet and get one? I can get a te410 if i really have to but would prefer to stay with the cheaper option. Any comments appreciated, Thanks ------------------------------------------------- This mail sent through IMP:

Hi, Is there anybody in this list who had experience with two TE410 cards on a server ? I know that the cards can?t share IRQs and I?m seeing to have two cards on a x335 IBM Xeon server. TIA -- Juanjo sin .sig

Hi all. We are getting our first PRI line to use with Asterisk and one of the technical specifications is about framing, structured or unstructured. The main difference about them is almost clear for me: http://ckp.made-it.com/g704.html says: "G.704 is the framing specification for G.703. A carrier can 'steal' a 64kbps time slot (TS0) from a 2.048 Mbps line and use this to

Hi, I'm going to be setting up some machines with 4 port E1 cards from Digium and I'm being told that TE410 is incompatable with several Intel chipsets including the ones in a lot of Dell server systems. Is this true? I can't find any confirmed details on the mailing list about it. Also, the email seems to imply that the TE405P will be fine, though it doesn't say that explicitly.

Hello, Can anyone point me in the direction of software to monitor channel usage on voice T1s? Using a TE410. The wiki documentation seems geared to SIP channel usage.... Thanks Charles -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051004/8450d0c2/attachment.htm