similar to: New cvs compile; basic operational question, please.

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'

Using the following defnitions with a C7960: exten => 3001,1,Dial(SIP/3001,15,r) exten => 3001,2,Voicemail2(u3001) exten => 3001,102,Voicemail2(b3001) exten => 3001,103,Hangup If someone is on this phone (real conversation) and another call comes in, the second call goes through the 15 second timeout and is dropped into the 2-priority as "unavailable" (not the 102 busy as

[3000] type=friend dtmfmode=INFO insecure=yes canreinvite=no auth=plaintext host=dynamic allow=ulaw [2000] type=friend dtmfmode=INFO insecure=yes canreinvite=no auth=plaintext host=dynamic allow=ulaw i have declared these two users 3000 and 2000. they are registering successfully. problem is that

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

I've just setup a new asterisk box (cvs HEAD) with a digium tdm411 and a couple computers with eyebeam. I have one small. I cannot call the eyebeam clients from the phone connected the fxs port. I can call the phone from the eyebeem clients. And, I get both the fxs phone and eyebeam clients to ring when a call comes in through the fxo port. I have been trying to get this straightened out

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Steve, Here is the config, I pulled from my server, that works with D'Link Phones: Main Menu -------------------------------------------------------------------------------- SIP.CONF [general] port = 5060 ; Port to bind to (SIP is 5060) ;bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) bindaddr = 67.109.153.236 disallow=all ;allow=ilbc allow=gsm allow=ulaw

I have an X100P used, at present, largely for outgoing calls. It shares the single incoming POTS line with a number of analog phones. Is it possible to talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd like to use only the SIP phone in my office, but let the analog phones continue to work in the rest of the house (until I can afford FXS cards anyway..) I can force

i have 2 asterisk servers one on CentOS and one on Fedora , i configured IAX trunking between the 2 servers so that i dial -say from a sip extension 2000 on fedora server to a sip extension 3000 on CentOS server the call seems to be established but hangup automatically after very short time and here is the iax2 set debug command result on centos server and also my iax.conf and extension.conf and

Guys I am having some serious issues with my call queue and Management is breathing down my neck pretty bad, and I am running out of ideas. I have a single queue for my tech support department. I originally was using the AgentCallbackLogin for them and it tested out great on our testing weekends, but it hasn't worked out since. It would only let one of them take calls at a time, no matter

Just upgrade from July 12th cvs to last night CVS-HEAD-08/27/04-00:00:09 When call comes in and is sent to a Cisco 7960, I see: -- Executing Dial("SIP/3008-9a9b", "SIP/3000|15") in new stack -- Called 3000 Aug 27 08:13:25 WARNING[1092070192]: chan_sip.c:676 retrans_pkt: Maximum retries exceeded on call 033f41c2187409b13ca364502ea9434e@206.222.193.101 for seqno 102

> -----Original Messages----- > From: "Steven Tardy" <sjt5atra at gmail.com> > Sent Time: 2018-02-26 10:48:48 (Monday) > To: "CentOS mailing list" <centos at centos.org> > Cc: > Subject: Re: [CentOS] How to update modules in iniramfs fastly > > On Sun, Feb 25, 2018 at 8:29 PM wuzhouhui <wuzhouhui14 at mails.ucas.ac.cn> > wrote:

Hi, I have an FXO card connected to my phone line which works in Asterisk as Zap/1. Is there any way of detecting whether something else is on the line before picking up on this channel? For example, I dont want to pick up and dial out on the line if someone is on it using another phone (which is connected directly to the line, rather than through Asterisk). Also, when an incoming call comes

I just started service with Broadvoice.com and everything seems to work. However, apparently my understanding of incoming sip contexts is less then what I thought it was. Could someone point me in the right direction? (* on a public address, CVS-HEAD-07/12/04, C7960 phones) In my sip.conf I have: [general] port = 5060 bindaddr = 0.0.0.0 allow=ulaw tos=0x18 ;sets ip tos bits (=lowdelay and

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

hi: Just a litle update: 41/8 allocated to AfriNIC (APR 2005). 73/8 allocated to ARIN (MAR 2005). hope it helps.

Hi, I configured asterisk on redhat linux 9 box. I installed two different ip softphones (SJPHONE and X-PRO) and got them registered with asterisk. The call from one phone to another does get routed via asterisk, but there is one problem coming up. As soon as call is accepted by the end user , it is automatically disconnected with the error "cannot align media streams". If I enable SIP

Hi ;) I'm a french newbie and i installed asterisk 1 day ago. I've got an ATA186 and a computer with Sjphone installed. If i want to call the sjphone from the ata or call the ata from de sjphone everything is ok. My problem is ,that i can't call the voicemail or any other phone number ..as 600 for exemple from the ata or the jphone. I don't know why but i looked after a long