similar to: SIP - DTMF Payload type

Hi I have kind of an odd problem. When dialing in from an outside line via a TE410P card it seems like MusicOnHold and MP3Player doesn't work properly (for me anyway). The remote end which is calling * doesn't hear the music but just keeps ringing. But if I insert a Playback("file_which_dont_exist") just before the Moh or MP3Player I can hear the music. Actually I observed the

Hi there I have a Welltech Wellgate SIP device and I want to be able to do a supervised transfer. I've read that in order to do that I have to use flash hook. The problem is just that I can't flash hook with this device. I'm in contact with the developer of the SIP device but don't know what to tell him in order to get him to fix this. What is happening when you flash hook, I

Hello there I'm quite a newbie in the IP Telephony area. I'm playing a little around with a setup with one linux box with a e100 p card installed, which functions as an Asterisk gateway and a oh323 GK(Gnu Gatekeeper). I have two h323 phones, Welltech WellGate 1501 and 3502. So far I've managed to get the two IP phones and Asterisk connected to the GK. I can place calls from one

Greetings, I'm running latest * from CVS on FreeBSD 4.10 box. We've just bought several WellGate 3502A FXSes to play with till welltech guys fix the 3504a's registration bug. So far everything is working as expected, except the fact only ulaw and alaw codecs work with *. If I add allow=gsm or allow=g723.1 in FXS's ports entries in the sip.conf, no voice is heard from both

Hi there I have some problems in setting up a connection between * and a Wellgate 1501 (1FXS). Either I can dial from * to my Wellgate or I can dial from the Wellgate to *. On the Wellgate you have to setup both "Line number" (which is the number it answers) and "Line account" (which is the account it registers as). Should I expect any problems if these are set the same?

Hi again, Kind of sheepish about asking for help, as I have only spent a day banging my head off this... I got my new Welltech 3701a, 1FXS,1FXO gateway. I flashed it with what is seemingly the appropriate firmware (SIP V1.04). This seems to have gone ok, and it is now registering both ports ok with asterisk. For 1 minute I thought I was home free and and everything was just going to work

I'm loosing hair at cosmic speed now for the past 10 days. Welltech's Wellgate 38xx/35xx FXO/FXS SIP hardware versions seem to have very buggy firmware possibly due to hastely done porting from H.323 firmware. Is there anyone on this mailing list who was able to: 1. setup a 35xxA FXS with all ports authenticating properly with *? or 2. setup a 38xx FXO to work as dial-in from pstn to

I got a Wellgate 3804A and need some hints: Both have public IP *.131=asterisk (1.6.0.1) *.133= Wellgate Wellgate 3804A settings (Line1~Line4): 1. Sip Config Mode: Proxy Primary Proxy IP Address: *.131 Primary Proxy port: 5060 Line1 Number: 1002 2. Security Config Line1 Account: 1002 Line1 Password: ****** 3. Line Configuration Line1: Type=FXO, Hunting Group=2, Hot Line =

Where I can find the firmware for the Wellgate 3804 ? The files are: - 2m4sipfxo.103 - 4fxosip.103 I don't have a password to pick up it at the welltech site. Kind regards, Miguel

Any feedback on this brand and in particular on doing business with WelltechUSA? I am looking to the Wellgate 3701A which is a 1FXS-1FXO arrangement. I am hoping to replace the near worthless Grandstream HT-488. This company is telling me that I need to wire $ directly into there bank account. Most unusual. Thanks for any feedback on this, Marty

I am interested in the wellgate 38XX FXO and FXS gateways (and other similiar units). My question is can outgoing call files use these devices??? Can I fashion an outgoing call file with a channel like: SIP/WellGate-1/5551212 (for the first port) or SIP/WellGate-2/5551223 (for the second port) TO these devices behave this way? Of course incoming calls I dont see as a problem. It's asking

hey * folk, am trying to configure a WellGate 3504A FXS SIP ATA (http://www.welltech.com.tw/products_ea01.htm) with asterisk. i've set up two SIP clients in sip.conf as follows: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind SIP channel to context = default ; Default context for incoming calls [1235] host = dynamic secret = somepass context = default type

I have a new wellgate 3802 unit. I have not gotten it to register with asterisk 1.2.6. My proxy setting is the correct IP in the 3802. My security config is 1001/1001 and 1002/1002 on the wellgate (simple at this time). My sip.conf has: [wellgate3802L1] type=friend dtmfmode=inband username=1001 secret=1001 host=dynamic canreinvite=yes nat=no context=wellgate [wellgate3802L2] type=friend

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

Hi again, I am trying to get my DTMF to use RFC 2833 rather then inband, so that I can utilize lower bandwidth codecs through my FXO. After much tinkering I was able to get my gateway (wellgate 3701A) configured to a point where I have some success, but no real joy. I have configured the RTP Payload type (or RFC2833 Payload type) to 101. I don't have a clue what this means, but I took

Anyone know how to set the wellgate unit so incoming calls pass on directly to asterisk? Right now incoming calls ring twice and I hear a recording saying enter the extension. If I go enter the extension it goes on to asterisk just fine. I just want the incoming call to go directly onto asterisk. Anyone found that out? Jerry

Ok this is a simple question... What has been your experience with the WellTech 38xx series (I'm looking specifically at the 3802) VoIP gateway? I'm looking for a good (and hopefully not too expensive) VoIP/T.38 gateway for my office. Asterisk intergration is not a major factor at this time but may be later on. How well does it work? Is Echo a problem? Do the T.38 capablities

Hi list,* *I am not able to make video calls between two sip accounts. below is the information. please help me where I am missing the configuration.* Extensions.conf* exten => 111,1,Answer() same => n,Dial(SIP/2206,60,r) same => n,Hangup() *SIP.conf* [2218] type=friend secret=******* callerid="Virendra" <9172341457> host=dynamic ;

Hi All, I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router with a PRI card in it, handing off to a PBX and vise verse. Calls in and out are working fine except for DTMF from Asterisk to the 2600. DTMF from the 2600 to Asterisk is fine. Here are the Asterisk console warnings I get when I send DTMF from Asterisk to the 2600: == Forcing Marker bit, because SSRC has changed Jun

Hello, I encountered the dtmf problem between my asterisk box (1.4.23) and suppliers gateway (unknown vendor). I have dtmf mode set to rfc2833 and it alway worked till supplier has changed something. Now I receive from him dtmf payload 100. With the second supplier which sends dtmf with payload type 101 everything works. in cli I get this message as dtmf is entered rtp.c:1287 ast_rtp_read: