similar to: SIP and ECHO

Everyone, Just thought I would drop a line telling everyone here I have the software RxFAX/TxFAX up and running without any real problems. I did have to..... RH 9.0 1) Install an audio devel rpm 1) install libtiff from source, and copy over a bunch of include files to /usr/local/include 2) build/install spandsp 3) move app_rxfax.c and app_txfax.c to apps/ dir in asterisk source tree. 4)

Hello, Does anyone know what may be causing this? Asterisk was built from cvs tonight. Ztcfg also says us is an invalid tone zone. Anyone got some information on what this is, why is it happening, and possibly some solutions? [root@anistonetech zapata]# asterisk -f -d DEBUG[1024]: File config.c, Line 653 (__ast_load): Parsing /etc/asterisk/asterisk.conf DEBUG[1024]: File config.c, Line 653

Hello, I resolved my echo issue using grandstream/estara etc etc sip phones and wcfxo interfaces from digium. I swapped out my via kt400 based msi kt4vl motherboard for an asus p4pe? i845? based motherboard and the echo has completly gone away along with aggressive suppressor option in the makefile. I hope this helps others. Brian J. Schrock Anistone Technologies, LLC 6926 Avery Rd. Dublin, OH

Like most others on this list I also have some really annoying echo whenever a call goes out to the PSTN from a SIP phone... SNOM/Budgettone -> Asterisk -> X100P -> PSTN I have tried every echo canceler in the makefile and turned on and off aggressive suppressor etc. etc. etc. tried 32,16,128, and 256 bridgetaps and I can get it reduced to only a few seconds on the intro of the call and

Hi, We are looking at consolidating our lines with PRI. This will allow the elimination of many fax lines. Some of them will be replaced with this type of config ... PRI * IAX * Channel-Bank FAX We will have daggressor suppressor enabled. Is anyone doing this and should I expect smooth operation? John This e-mail was scanned and found clean by Monroe-Woodbury CSD Antivirus.

Checking the earlier mails, it stated that the phones were $75 (100) & $85 (102) ref :- http://lists.digium.com/pipermail/asterisk-users/2003-June/013483.html Well, I just called Ovislink/dgtimes and was quoted $90 & $100 and the person said there was no price change. Anyone on this list actually bought them at the $75 & $85 rate ??? Regards...Martin -- Too much is just enough.

Hi there! I installed the BudgetTone (GrandStream) on my LAN without any problems. Then, I moved it to another location using a D-Link NAT. I opened 5060 (SIP) and 5000 to 5008 for RTP. I also fixed the IP address of the BudgetTone. When I receive a call on my Asterisk, it would ring my FXS as before. However, after I pick up, it hangs within a few seconds (Hungup Zap1-1 in the log). The

hi, can someone who has used Budgettone phones tell me how to do the following: an incoming call comes in and is answered by the receptionist. she need to put the call on hold, speak to whoever the call is for, and either (after that) pass on the call, otherwise speak again to whoever was on the call and hang up .. so far i've got as far as a blind transfer by pressing transfer button and

hi there .. I asked sometime ago regarding getting a Budgettone working with Asterisk over G729. My system is quite simple, Asterisk server with 1 G 729 license installed, and 10 Grandstream phones. Only one of them needs G729, because it's on a remote link via an ADSL bridge. The rest run happily on G711 on a local network. I added the lines disallow=all allow=g729 to the sip.conf entry

I upgraded from RC2 last night, but have a major call quality issue. Heres our setup: 1 FXS and 1 FXO card. Incoming/Outgoing calls via IAX trunking from our provider. G729 running between us and the VoIP provider. Two handsets, one BudgetTone 102 and a Cisco 7940G running the 7.2 SIP firmware. Both these phones are using ULAW to the server, and we have plenty of G729 licenses on the server.

I have an asterisk installation at a client, it's quite simple. Basically it's an asterisk downloaded from CVS about a week ago, with 3 Zaptel FXO cards (the digium ones) and 10 Grandstream Budgettone SIP phones ... Every now and then, especially when a call is ringing and not picked up immediately, Asterisk quits with a segmentation fault error. IT seems quite inexplicable, my dialplan

This past weekend, but holiday was ruined due to a log device "replacement" gone awry. I posted all about it here: http://jmlittle.blogspot.com/2008/05/problem-with-slogs-how-i-lost.html In a nutshell, an resilver of a single log device with itself, due to the fact one can''t remove a log device from a pool once defined, cause ZFS to fully resilver but then attach the log

On Tue, 2003-12-23 at 19:22, Brian West wrote: > I'm just double checking.. I was told it wasn't possible but i'm going to > ask just in case. > > Can you set outbound callerid on a channelized T1? > >I think there is a way to do something like DID with the 4 digits of >DTMF passed before the call. It is unlikely though that you will find >someone interested

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

I''m not sure if this is the right place for the question or not, but I''ll throw it out there anyways. Does anyone know, if you create your pool(s) with a system running fishworks, can that pool later be imported by a standard solaris system? IE: If for some reason the head running fishworks were to go away, could I attach the JBOD/disks to a system running snv/mainline

On Solaris x86, does zpool (or anything) support PATA (or SATA) IDE SMART data? With the Predictive Self Healing feature, I assumed that Solaris would have at least some SMART support, but what I''ve googled so far has been discouraging. http://prefetch.net/blog/index.php/2006/10/29/solaris-needs-smart-support-please-help/ Bug ID: 4665068 SMART support in IDE driver

Hi- I am attempting to setup my Budgettone phone for use with my * server and am having problems obtaining an IP address. I have checked the phones settings to make sure it has dhcp enabled and it is. The display says no IP. I bought the phone but do not have any documentation other than the Wiki, but I am still at a loss. What could be preventing the phone from picking up an IP address? Any

After having to replace an internal raid card in an X2200 (S10U3 in this case), I can see the disks just fine - and can boot, so the data isn''t completely missing. However, my zpool has gone. # zpool status -x pool: storage state: FAULTED status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the

Please reply to david.curtis at sun.com ******** Background / configuration ************** zpool will not create a storage pool on fibre channel storage. I''m attached to an IBM SVC using the IBMsdd driver. I have no problem using SVM metadevices and UFS on these devices. List steps to reproduce the problem(if applicable): Build Solaris 10 Update 2 server Attach to an external

This zfs looks great! I really hope this gets put into solaris soon since I don''t think I could live with Solaris express on a production machine. The easy of adding disk and moving directories looks like a life saver, especially for me who deals with trying to store digital media which piles up a couple of gig a day! This message posted from opensolaris.org