similar to: SCSI schizophrenia

I have Centos 5.2 and am trying to set up my first tape loader, a Quantum SuperLoader 3. My "cat /proc/scsi/scsi" outputs the following: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: transtec Model: PV610F16R1C Rev: 373I Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: Ultrium

Hello, I have recompiled a Linux 2.4.18 kernel on my Sparc and I receive some oops when quick disk access are performed. For example : I download some files on a local server with ncftp (-TR directory), and ncftp hangs up (with kernel oops !). I cannot umount the device and I must reboot the station. For information, my sparc is a SparcStation 5 (85 MHz) with 160 Mbytes and 3 SCSI

Hi All, I have a Quantum scalar i40 tape library. I need to configure it to TWO tape partition libraries, e.g., library_a and library_b, so that each library has its own tape drive. Then connect this physical tape library to two different CentOS servers so that each server can see its own media changer and tape drive. I once had a successful configuration on one host but NOT on the other. One

Basically the issue comes down to my Volume Groups not being found by this initrd, causing good ole kernel panic. initrd-2.6.12.6-xen3_12.1_rhel4.1.img [root@xen01 lvm]# uname -a Linux xen01.inside.***.com 2.6.9-22.0.2.ELsmp #1 SMP Thu Jan 5 17:13:01 EST 2006 i686 i686 i386 GNU/Linux [root@xen01 lvm]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 2) Everything

I'm having speed problems with the SCSI card we're using to do tape backup. It seems to be functioning in 16 bit mode and the current thinking is that perhaps it's using a legacy driver instead of the correct one. The Adaptec site has a 'driver' for RHEL5 which I've downloaded and tried to install but it seems to have a problem installing on a CentOS-5 system. [root at

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

Hi, all! I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server. The server has SAS SCSI based two 2.5" hard disks. I could only install RHEL 4.0 Update 1 because the server is equipped with RHEL 4.0 Update 1's device driver only. I've included below the boot process messages concerned with SCSI controller. If it's possible for me to install CentOS 4.0 on my

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

I increased the SAN partition size for a given volume. Is there a way I can have fdisk recognize the new size without a reboot? Thanks, Scott

Hello, After updating to 6.6 I've lost my connection to my tape library. Old log file (6.5): Sep 13 08:17:51 server1 kernel: scsi 1:2:0:0: Sequential-Access HP Ultrium 5-SCSI Z65W PQ: 0 ANSI: 6 Sep 13 08:17:51 server1 kernel: scsi 1:2:0:1: Medium Changer HP 1x8 G2 AUTOLDR 4.20 PQ: 0 ANSI: 5 New log file (6.6): Oct 28 18:15:06 server1 kernel: scsi1 : hpsa Oct 28 18:15:06

Hi, Hi, I have been googling, and can't find anything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892:

On 11/4/2015 11:36 AM, Boris Epstein wrote: > Absolutely, I see your point. This was the starting point - you add the > device on the ESXi server, you reboot the VM, the VM sees the device, no > problem. Now, I ask - do I have to reboot the VM? Logically I hope there > ought to be a way for me not to have to do that - but I have yet to figure > out how to get there. > vmware

Hi, we are currently working on getting windows working on your xen servers. but we are facing a severe problem where dom0 and all domus hang for 1-5 seconds from time to time. we think it is probably because of disk i/o, because top sometimes says 100% wa (waiting on io) during the hang. dom0 has cpu 0 for exclusive use and the windows vms use cpu 1 to 7. should we give dom0 more than once

Hi people, I installed a via SATA controller in a CentOS release 3.8 (Final) - I needed additional disk space. After the first boot, the kudzu service, added the following line to /etc/modules.conf: alias scsi_hostadapter sata_via and I rebooted. After reboot in dmesg one can see: scsi0 : sata_via scsi1 : sata_via Vendor: ATA Model: SAMSUNG HD080HJ Rev: WT10 Type: Direct-Access

Dear All, I have using CentOS 4.4 and My PC USB Drive is detected and but the device "/dev/sda1" is not initialized and i have executed the dmesg command and I am getting the following messages usb 1-6: new high speed USB device using address 2 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage

Hi! I am trying to setup a guest using virt-install script: /usr/bin/virt-install -n fc18guest5 -r 1024 \ --disk path=/home/aik/virtimg/fc18guest,size=8 \ -c /home/aik/virtimg/Fedora-18-ppc64-DVD.iso \ --video vga --arch=ppc64 -d --machine=pseries And it fails. I could not find any relevant log in /var/log/libvirt/ so I simply hacked /usr/local/bin/qemu-system-ppc64 to print all the

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

Hi, all We met an issue while doing the nbd related test, will you please help to review if this issue is a bug? Thank you! ================================================= Subject: [s3-bug-review] [RHEL7] [Virtual disks] Met error messages while the guest OS booting up on a nbd device. Description: Start a guest with only one nbd device and with a linux OS installed on the nbd device,

On Tue, Aug 20, 2013 at 4:33 PM, Paolo Bonzini <pbonzini@redhat.com> wrote: > Il 20/08/2013 08:00, Timon Wang ha scritto: >> <disk type='file' device='disk'> >> <driver name='qemu' type='raw' cache='none'/> >> <source file='/home/images/win2008_2_sys'/> >> <target