similar to: Why doesnt anyone reply me ?

How do I get asterisk to populate the "Calling Party Number" field in an H.323 call? I have asterisk configured to accept a SIP call and connect it to an H.323 IVR system. The call goes through, but the caller id is put in the "Display" field rather than the "Calling Party Number" field. -----Original Message----- From: Skuse, Phil [mailto:Phil.Skuse@vicorp.com]

Please I need help, I don't know why,almost every time I dial on my dect phones, the dialtone doesn't go off and * doesn't recognise anything!!!! I'm using two dlink voip gateways, MGCP: DL102s. Any ideas? thanks in advance michelle matis ----- Tu cuenta de correo gratuita Mixmail http://mixmail.ya.com Ya.com ADSL Home 24 h, Módem + Alta ¡Gratis!

I'm not sure if I am wording this correctly, but I'll try. I have a Cisco 2621 w/ a couple FXO and FXS ports. I have a couple cheap analog phones plugged into the FXS ports. I am able to get * to ring those phones when a call comes in, but I cannot get the phones to dial out. I guess it's all syntax that I'm doing wrong. Does someone have a couple small snip-its to accomplish

I've read through the archives and have picked up that * does not need a gatekeeper to talk directly with an H323 handset to send and receive calls. I'm trying to go PSTN----*-----H323 and all the examples that I can find use a gatekeeper. Are there any examples or hints for doing it without the gatekeeper? many thanks in advance Brian

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

I've been trying to figure this one out for a while, but to no avail. I have my cisco ubr924 setup for MGCP with Asterisk as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2. Any help is appreciated. from mgcp.conf: [ubr924] host=65.37.86.203 context = from-sip (just as a

asterisk*CLI> load cdr_unixodbc.so Loaded /usr/lib/asterisk/modules/cdr_unixodbc.so => (unixODBC CDR Backend) == Parsing '/etc/asterisk/cdr_unixodbc.conf': == Parsing '/etc/asterisk/cdr_unixodbc.conf': Found -- cdr_unixodbc: dsn is MySQL-asterisk -- cdr_unixodbc: username is root -- cdr_unixodbc: password is [secret] -- Connected to MySQL-asterisk it

I'm trying to link up Cisco MGCP-enabled router (residential gateway) with Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP 0.1 vs 1.0? Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk): MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427Verb:

Quick question from a newbie, I have asterisk configured to dial IAX extensions (which works). When dialing from one IAX extension (using Firefly) to another IAX extension (also using Firefly), the Firefly client rings on the receiving end and gives the option of accepting or denying the call. However, when I dial in to Asterix using a VoicePulse number and dial the same extension Firefly

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

I'm a newbie to Asterisk, but I'm moderately knowledgeable about phone systems. Right now, I'm most certainly confused. I have a TDM-04B (four FXO) and four analog FXO lines running into it from an AdTran 616. I have Asterisk working internally, although I could use some help getting incoming calls to answer properly and configuring my outbound dialplan. Here's where I'm

Hello all! We have a PSTN line with four numbers calling into it. There is distinctive ring on these lines. They are are follows: 1. standard ring 2. short ring 3. long ring 4. short ring, long ring, short ring Based on the information I have been able to find, I have created the following entries in my zapata.conf file, to try and weed out some of the timings: dring1=95,0,0

Hi, I upgraded my two asterisk boxes today to the latest cvs (up from 5/3/04). These two boxes talk to eachother via sip, not iax. Since the upgrade, I get the error "Failed to authenticate on INVITE" trying to make calls to/from either box. Removing the secret from each box's sip config seems to work but is utterly braindead. Has anyone seen this? - Eric

Hi, My client wants incoming callers who do not press a digit to go straight to the operator. Does anyone have an idea of how this could be done? I've looked for some examples, but I'm still not clear on it. Here's the relevant portion of my extensions.conf: ------- ; Wait 15 seconds for an answer (pick up the local phone) exten => s,1,Wait,2 ; Answer the phone exten =>

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

I'm a bit confused about how WaitExten works. I assumed that when it returns 0, the next priority in the extension would be executed, but that doesn't seem to be the case. When I get to WaitExten and enter extension 8, it plays the message, then Waits another 10 seconds and times out. [local] exten => s,1,Wait,1 ; Wait a second, just for fun exten =>

Greetings, Below is part of the contents of my extensions.conf file. exten => s,1,Wait,1 ; Wait a second before answering. exten => s,2,Answer exten => s,3,ResponseTimeout,10 ; Set the amount of time the user ; has to make a selection. exten => s,4,DigitTimeout,5

Hi, Greatly appreciate if some one help me with the application read(). asterisk*CLI> show application read asterisk*CLI> -= Info about application 'Read' =- [Synopsis]: Read a variable [Description]: Read(variable[|filename]): Reads a '#' terminated string of digits from the user, optionally playing a given filename first. Returns -1 on hangup or error and 0

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls