similar to: Dial in modem speeds over VoIP?

Hi all, To solve my need for dial in modems, I've hit upon an idea: buy a used T1 "analog" modem bank like a Lucent Portmaster that takes in a T1 and provides several 56K modems. This is overkill for a lightly used dial in service, but the prices of these boxes is so cheap (~$300) with ISPs going away from dial in service that it makes sense. This is how I imagine it would work:

Hi all, I would be most grateful if someone would review my plans for my new phone system and comment on areas of expected trouble and advice on what to do better. Instead of moving our Panasonic KX-TD1232/TVS200 system (ugh...) to our new location, we've decided to jump into IP telephony with *. But we are new to * (but not Linux), so we're trying to learn as much as we can before we

Hi all, I'm looking for recommendations on ethernet switches for a new install. Ideally would want switches with at least 24 ports, ideally with a GE uplink, and that support PoE (power over ethernet) on every port. I've seen lots of switches, and lots of "power hubs", but the combination, which makes a lot of sense, seems rare. What is out there? Do the switches need to be

Okay, I am facing a move in two months to newly renovated space. I have to decide *this week* between: A) Pull LAN and phone cables, prepare to move and expand our "traditional" PBX (Panasonic KX-TD1232 and VPS200). or B) Pull only LAN cables, go VoIP, use Asterisk as PBX. It is *not* an option to purchase a VoIP system package from Cisco, 3com, etc. Installers are getting an

Hello, I ftp'ed the binary RPM for samba from us6.samba.org, and when I tried to verify it, rpm said that MD5 was NOT OK. Has anyone else reported this behavior? Thanks, Hiten Sonpal sonpal@ciholas.com Engineer, CIHOLAS Enterprises Voice: 812 476 2721 x 102 2626 Kotter Ave, Unit #D Fax: 812 476 2881 Evansville, IN 47715 http://www.ciholas.com

Hi all, While pondering my choices for local dial tone service via a bunch of POTS lines or a T1, I began to wonder if perhaps there is another way. Are there VoIP dialtone providers? That is, could I use only my internet connection for voice calls and not have a separate T1/POTS bank for that? I guess I am imagining a company that gateways between the PTSN and the internet backbone.

Hi all, This is a NEWBIE question, so all you experienced types that are tired of stupid questions can move on... I've pretty much given up trying to do my entire phone system over IP (including local service), so I have to select and provision my local CO lines. I need about 10-12 lines which can be POTS lines, of course. But, I thought, why not get something digital and expandable

I have a dilemma. I am trying to setup an asterisk setup for about 10 people, but with the ability to expand to 100s. We are looking into hardphones to use for our systems. Here are the requirments I am looking for: SIP Not POE Full duplex Speakerphone $100-$300 We would like to have the cordless and corded option if possible (at least for 3 of the 10 people). So here are the

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721

Hi, I have noticed the 'ssl_cipher_list' directive in the 1.0-test snapshots which is not in 0.99. It's default value seems to be "all:!low". However, this would not be compatible with openssl's cipher listing format. Thus, I would vote to change it's format to be openssl compatible. To be compatible, it has to be changed to "ALL:!LOW" (just upercased in

Dear Jan, Thank you very much for your excellent description of the problem and the self-contained test code. This is a problem that I've been meaning to either document better or solve for some time. The root of the problem is with the builtin S-Plus terms.inner function: > attr(terms.inner(asthma ~ pol(age,kx) + smok),'variables') expression(age, kx, smok) You can see that

I am interested in configuring Dovecot's TLS so as to retain forward secrecy, but eliminate all of NIST's elliptic curves. Besides being subject to side channel attacks [1], in some quarters there is a general distrust of NIST's curves and any of their other cryptographic primitives after the Dual EC DRBG debacle. >From what I can tell, the following will prevent the use of

Hello, I am an R newbie, trying to use lsoda to solve standard Lotka-Volterra competition equations. My question is: how do I pass a parameter that varies with time, like say, phix <- 0.7 + runif(tmax) in the example below. # defining function lotvol <- function(t,n,p){ x <- n[1]; y <- n[2] rx <- p["rx"]; ry <- p["ry"] Kx <-

I really want to do this: abline( a=tan(-kT*pi/180), b=kY-tan(-kT*pi/180)*kX ) where kX,kY and kT are vectors of equal length. But I can't do that with abline unless I use a loop, and I haven't figured out the least unelegant way of writing the loop yet. So is there a way to do this without a loop? Or if I am to resort to the loop, what's the best way of doing it considering that I

>>>>> Spencer Graves >>>>> on Mon, 27 Jan 2020 23:02:28 -0600 writes: > ????? Thanks for the reply. > On 2020-01-27 19:56, Abby Spurdle wrote: >> Maybe I'm missing something really obvious here, but I was unable to >> create a matrix out of POSIXct object(s). >> Perhaps that deserves a separate discussion...? yes,

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

Hi everyone ! I have some aditional info on problem with TXFax and sending multi-page TIFFs. I have made 6 different multi-page TIFFs (Group3 1D with fillbits EOL aligned - 3 pages one TIFF in lowres and one in hires, Group3 2D -3 pages againg in both resolutions , and Group 4 - 3pages in both resolutions), and then tried to send them to Panasonic KX-F1100, Panasonic KX-F500 and SpanDSP

Thank you for response. So a "standard" quad bri card can serve the KX-TD1232, no need for anyt special fxs similar equipment. Would like not to invest much more money into the Panasonic, I wan't it out :P BR Amund -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Peter Svensson Sendt: 14. juni

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

I am not familiar with that phone. Is it single pair? -----Original Message----- From: broadbandvoice@comcast.net [mailto:broadbandvoice@comcast.net] Sent: Sat 4/22/2006 12:13 PM To: asterisk-users@lists.digium.com Cc: Subject: [Asterisk-Users] PANASONIC KX-TS208W - Speakerphone IncompatibleWith Asterisk 1.2.3 I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does not work