Displaying 20 results from an estimated 2000 matches similar to: "Sending dtmf over an ougoing call from asterisk"
2004 Aug 13
1
Problem with ougoing Zap calls
I'm able to receive but not make calls with zaptel using an X101P
connecting to Asterisk with an Xlite client. My client has context = flat
in sip.conf and extensions number 8919
In extensions.conf I've got:
[home]
; Line 1
;
exten => 8919,1,Dial(${PHONES1},20,Ttm)
exten => 8919,2,Macro(vmessage,${PHONES1VM})
exten => 8919,3,Hangup
[outgoing]
exten =>
2004 Jun 24
4
toll access - account code
Our telco has setup toll access account codes for outgoing calls. I would
like to include these account codes in the dialplan for certain extensions
(fax lines, modems) so that they are not prompted for the 4 digit code when
making a toll call. I have played around with the 'w' command with ZAP
channels, commas, and DISA, all with no success. I see a lot of examples of
Asterisk with
2006 Nov 03
1
SendDTMF() behaves strangely
Hi, everybody:
As part of a paging macro I'm using SendDTMF to send digits to the
called party.
The section looks like this:
exten => s,1,Wait(0.5)
exten => s,n,SendDTMF(9531290)
exten => s,n,Wait(1.0)
exten => s,n,Set(MACRO_RESULT=CONTINUE)
To test I direct the call to a live extension just to hear what's
happening -- what actually happens is that only the 9 is sent, and
2013 Feb 10
2
[LLVMdev] llvm-installation
hello sir,
in llvm installation ./configure command worked properly but while
giving
make -j 4 command in ubuntu
everything got build properly but at last it showed error as
llvm[4]: Linking Debug+Asserts executable clang
collect2: ld terminated with signal 9 [Killed]
make[4]: *** [/home/manoj/Desktop/LLVM/
build/Debug+Asserts/bin/clang] Error 1
make[4]: Leaving directory
2008 Apr 21
1
Compile libtheora 1.0beta3 with VS2005
Hi all,
I tried to compile the theora source with VS2005. But it asked for the ogg
library. error message is as follow.
****************************************************************************
Error 1 fatal error C1083: Cannot open include file: 'ogg/ogg.h': No
such file or directory c:\Documents and
Settings\Manoj\Desktop\libtheora-1.0beta3\include\theora\codec.h
64
Error
2005 May 23
1
SendDTMF into a conference room
I have been trying to figure a way to SendDTMF into a MeetMe room using
the Manager API.
I can't redirect everyone into another context and then bring them back
because that would mess up my logic.
I am trying to use local channels and the originate Action to accomplish
this.
Exten: 3441115
Priority: 1
ActionID: actid-00000001
Context: senddtmftones
Action: Originate
Channel:
2009 May 04
8
CentOS DomU on Opensolaris Dom0 - virt-install fails with error in virDomainCreateLinux()
Hi,
I am trying to install CentOS on an Opensolaris Dom0. virt-install fails
with an error in virDomainCreateLinux().
Is this a known issue? Am I missing some step?
manoj@mowgli:~$ uname -a
SunOS mowgli 5.11 snv_101b i86pc i386 i86xpv Solaris
manoj@mowgli:~$ pfexec virt-install
What is the name of your virtual machine? centos
How much RAM should be allocated (in megabytes)? 512
What would
2013 Feb 11
1
[LLVMdev] llvm-installation
hello sir,
./configure worked properly but while giving
make -j 2 command in ubuntu
everything got build properly but at last it showed error as
llvm[4]: Linking Debug+Asserts executable clang
collect2: ld terminated with signal 9 [Killed]
make[4]: *** [/home/manoj/Desktop/LLVM/
build/Debug+Asserts/bin/clang] Error 1
make[4]: Leaving directory
2013 Feb 11
1
[LLVMdev] llvm
hello sir,
./configure worked properly but while giving
make -j 2 command in ubuntu
everything got build properly but at last it showed error as
llvm[4]: Linking Debug+Asserts executable clang
collect2: ld terminated with signal 9 [Killed]
make[4]: *** [/home/manoj/Desktop/LLVM/build/Debug+Asserts/bin/clang] Error
1
make[4]: Leaving directory `/home/manoj/Desktop/LLVM/
2013 Feb 10
0
[LLVMdev] llvm-installation
You should use make -j with a number lower than 4, it looks like you ran
out of memory when linking.
On 10 February 2013 15:41, Manoj C <manoj.chinthala at gmail.com> wrote:
> hello sir,
> in llvm installation ./configure command worked properly but while
> giving
> make -j 4 command in ubuntu
>
> everything got build properly but at last it showed error as
>
>
2004 Aug 30
3
Multiple lapply get-around
I am faced with a situation wherein I have to use multiple lapply's. The
pseudo-code could be approximated to something as below:
For each X from i=1 to n
For each Y based on j=1 to m
For each F from 1 to f
Do some calculation based on Fij
Store Xi,Yj = Fij
End For F
End for Y
End for X
Is there anyway to optimize the processing logic further? I *guess*
using the multiple lapply
2004 Aug 06
2
DTMF after answer
Hello,
I'm looking for a similar feature...
Dial a number via ZAP/g1
after the line gets answered
wait 10 seconds
send DTMF
Regards,
Marc
--
Network Manager Marc Storck
LuxAdmin.Org
mstorck@luxadmin.org
Internet Service Provider
http://www.luxadmin.org
15, route d'Esch Phone: +352 2727
3030
L-4544 Belvaux Fax: +352
2012 Jan 20
8
The Recycled PIDs Fix
** Low Priority **
Hi Volker,
This is regarding your fix on recycled PIDs. I am an NCP developer from Novell and we use libsmbsharemodes library
from Samba for Cross Protocols Locks between NCP, Samba and others. I have few queries regarding your fix.
In your fix, you have added a new field called 'unique_id' in the server_id structure
and we need to pass this in our call to samba
2005 May 30
3
Vector Manipulation
Dear All,
For any given vector, I want to extract a sub-vector such that the new vector skips all zeros, if any , at the start of vector. Is it possible to achieve this w/o looping?
E.G : > x = c(0,0,1,2,3,4,5,0,0,8,9)
> y = somefunc(x);
> y
[1] 1 2 3 4 5 0 0 8 9
In the example above, I want to skip the two
2003 Dec 16
2
AT&T access code entry by Asterisk
I have a dialplan that requires that we use * to send the long distance access code to AT&T. I have found in the list that the `w` command can be used to inject a pause, I have tried the following:
exten => _91NXXXXXXXXX,1,Dial(ZAP/g1/${EXTEN}www5555555,70)
There `5555555` is the ld access code. I tried various quantities of `w`s but I never got * to dial the ld access code. Allof the
2006 Jan 26
2
Transferring Using Flash
Greetings.
I am attempting to configure a system based on Asterisk 1.2.3 to be used
as a backup should our aging voice mail/auto attendant system fail, which
seems increasingly likely given its advanced years. The first part of this
task is getting the auto attendant feature to work correctly, which I
would have figured to be relatively easy. I have successfully built a menu
structure, but cannot
2004 Oct 05
4
Long distance provider with access number and auth code
I need to be able to dial a long distance provider that uses an access
number and an auth code. I would like to be able to program this so
that the user can dial 8 and then the long distance number, asterisk
will hopefully do everything in the middle.
The sequence to accessing the provider is on my traditional phone speed
dial as:
* Dial local access number
* Wait 5 seconds
* Dial the auth
2006 Nov 08
2
flash transfer problem in asterisk integration with old PBX
I've tried to transfer a call using the Flash command, but with my
configuration it doesn't work.
I have a traditional PBX connected with a zap channel to Asterisk that acts
like an IVR:
TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk
>From the TELCO line I can make a call to the traditional PBX and reach
Asterisk, the IVR system on Asterisk answers the call and I can
2005 Sep 06
1
Some problems (SendDTMF, Wait, Parked Calls)
Hi all! I would like to solve some problems:
I have a sip provider that lets me make pstn calls after listening some
stuff and entering a pin number:
1) How can I make Asterisk enter the pin number? Then wait 1 second and
enter the phone number?
I have in extensions.conf:
exten => 6*,1,Dial,SIP/2002@myprovider,60,tr
I have tried with w (like with ZAP channels) but it does not work, nor
2003 Aug 05
4
SendDtmf
Hello all,
I am trying to use asterisk to call a local access gateway by dialing a fix number, after getting connected, the is a IVR prompt for pin number and finally the real destination number. I manage to use asterisk to dial to the gateway but have no idea how to send the pin number and destination number. This is due to asterisk only process the next ext only if dial app has terminated. My