similar to: Cisco 7920 phone

> Message: 5 > Date: Fri, 12 Sep 2003 13:24:13 -0400 (EDT) > From: "David C. Troy" <dave@toad.net> > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] 7206 as SIP->PSTN Gateway? > All, > > I know you can use, say, a 2620 w/2 port FXO card as > a SIP gateway. Clearly you can use the 5300, 5800, and > MGX8850 too. > >

During debugging of H323 trunk side (using Jeremy Macnamara's H323 driver in ~/channels/h323) a couple of things come don't quite work as advertised... 1/ the following line in extensions.conf explicitly sets the outgoing caller ID (required in my case for downstream GK processing..) exten => _1NX.,1,SetCallerID,6400047602100 exten => _1NX.,2,Dial,H323/${EXTEN:1} what

John Todd wrote.... > For those of you wanting to salvage your Cisco ATA-186 after > inadvertent locking, or after recovering your devices from a vendor > who has locked them, here is a rainy-day project for you: > somedoc.pdf..... Immediately strides to ATA, rips off cover... woohoo, EEPROM is socketed.... well maybe I'll just copy the contents of a working ATA into the

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

From the thread..... > Subject: Re: [Asterisk-Users] IAX <> IAX trunking... DP cache? > Date: 20 Aug 2003 11:29:59 -0600 > From: Steve Meyers <steve-asterisk@spamwiz.com> > >>Brian West wrote: >> >>>I would use the latest CVS for one. And try again. >> >>Unfortunately, I've tried numerous times to get a current CVS trunk

I have successfully built and made asterisk talk SIP extension to SIP extension, read all the docs, and about 1000 emails from the archive. The trunk side of Asterisk, from the docs perspective, is a smidgin TDM-centric, Analogue, T1, zaptel.conf etc..... Asterisk cares not about the externally presented digits as the telco KNOWS which time-slot or analogue line the call came from I live in an

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

On Fri, Sep 03, 2004 at 03:01:01PM -0500, Anshu Dasgupta wrote: > ><snip> > >for (BasicBlock::iterator I = Dest->begin(); PHINode *PN = > >dyn_cast<PHINode>(I); ++I) > > visitPHINode(*PN); > ><snip> > > > >build_vc71\lib\Transforms\Scalar\SCCP.cpp(202) : error C2275: > >'llvm::PHINode' : illegal use of this type as

OK What client cards do work? For each of the following: 802.11a 802.11b Media: PCI PCMCIA USB OS: FreeBSD 4.7 Recomendations please Thanks David ----- Original Message ----- From: <john@critchley.biz> To: "vizion communication" <vizion@ixpres.com> Sent: Monday, April 14, 2003 2:04 PM Subject: Re: Annother Wireless network card annother problem > > > > I

Hi all Just wondering if anyone has pointers for graphing data from Samba using MRTG. I already have MRTG graphing things like signal strength (cisco aironet pci), total kbps in/out each interface, mem and disk i/o usage. I'd like to graph, for example, average number connections over time; or maybe logins per hour .... or failed logins per hour. I know MRTG's requirements for input

Dear List, There has just been this question (as well as the answer to it) in the S list: > I would like to put some text in plots... but in french. How can I > write accented letters? > I suppose that there is a possibility similar as the one which > works in LaTeX, isn't it? What about R (for Windows and in East European languages)? Specifically, how can I give a title like

I can confirm that both are compiled properly: A) PHINode *PN; for (BasicBlock::iterator I = H->begin(); PN = dyn_cast<PHINode>(I); I++) .... B) for (BasicBlock::iterator I = H->begin; isa<PHINode>(I); I++) { PHINode *PN = cast<PHINode(I); .... } I'll make a patch for whatever solution do you prefer (this problem is a showstopper for more than a dozen

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

Does anyone know if there is a Smartnet contract or whatnot available from Cisco for access to the latest 7920 images? I've got one w/ asterisk that is exhibiting a few of the documented bugs running 1.0.3 (1.0.7 is the latest IIRC). Thanks! -- /* Ian A. Underwood - agentgrn@dcne.net - http://www.agentgreen.org There are 4 boxes to use in the defense of liberty: soap, ballot,

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

I finally have my 7920 working though I'm seeing this bizarre behavior. As soon as the 7920 boots and authenticates with the AP my 7960 release's its ip. Aug 24 15:52:37 babel dhcpd: DHCPRELEASE of 192.168.30.133 from 00:07:eb:26:e3:22 (SIP0007EB26E322) via eth0 (found) Aug 24 15:52:37 babel dhcpd: DHCPDISCOVER from 00:0d:28:2e:95:f0 via eth0 Aug 24 15:52:37 babel dhcpd: DHCPOFFER on

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours