similar to: X100P Ringing/Answering

Hi All, I recently purchased the Asterisk Developer's Kit (TDM) to try out Asterisk. After following the directions in the Digium's FAQ topic entitled "Q. How do I configure my TDM40B and X100P?", I'm receiving the following error: WARNING[1074428608]: File chan_zap.c, Line 6748 (load_module): Ignoring rxwink ERROR[1074428608]: File chan_zap.c, Line 6692 (load_module):

Hey! I am trying to configure the voice onference with MeetMe application for my internal users. I have my server and 4 clients on same LAN and following is my extensions.conf file: [globals] Ahsen=SIP/222 Tahami=SIP/444 Uzair=SIP/333 Wasif=SIP/555 [internal] exten => 1234,1,Macro(voicemail,${Ahsen}) exten => 4321,1,Macro(voicemail,${Uzair}) exten => 5678,1,Macro(voicemail,${Tahami})

Anyone have a suggestion on where I can get a decent new MB with 5v capable PCI slots. It seems like every decent server MB on the market has 3.3V slots only. Is diving into the junkbin my only choice if I can't afford to replace the 5v quad-T1 wildcard? Thanks Mark Farver

Dear all expert, (i posted this question one time, but i couldn't reach the answer -so allow me to post here) 1)I download asterisk realse version 1.2 beta1. After that i compile it successfully and run it with: asterisk -vvvc 2)I follow the instruction in http://www.asteriskguru.com/tutorials/asterisk_voip_ipphone.html in sip.conf: i add two account: [ivan] type=friend username=ivan

I have posted soo many times in the past but never recieved even a single reply . seem like you people are ignoring me or either way too busy .. never mind this is my last try . How can record a conversation with asterisk ? I tried to use Record() but dint work for me .. here is what i tried . exten => s,1,Wait,1 ; Wait a second, just for fun exten => s,2,Answer

I see there is the DigitTimeout application that sets the maximum time between digits before asterisk will interpet. Is there any way to control the minimum? We are having problems with incoming calls on our X100P where callers try to dial 10, but the 1 gets detected twice and they end up on extension 11. Thanks Mark Farver

Is anyone running Asterisk under Fedora Core 1 (http://fedora.redhat.com/)? If so, did everything with Asterisk work properly? I'm looking to migrate from Red Hat 8.0 to Fedora this week. Thanks.

I have a pair of sites tied together with a T1 line running zaptel PPP on either end. The system works, but I keep getting these messages in the kernel logs, and users are reporting connection problems (TCP timeouts, and hangs) especially under high usage. --snip-- HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC

Is there something special that needs to be done to allow a T100P/T400 to respond to a remote loop request? I am having some issues with a Point to point T1 line using zaptel ppp. This line gave us small problems when we had a pair of Cisco 2600's on either end but now with the zaptel ppp it is going down every couple of minutes for 15 intervals. The phone company says the line is good to

I'm a bit confused about how WaitExten works. I assumed that when it returns 0, the next priority in the extension would be executed, but that doesn't seem to be the case. When I get to WaitExten and enter extension 8, it plays the message, then Waits another 10 seconds and times out. [local] exten => s,1,Wait,1 ; Wait a second, just for fun exten =>

I must be doing something stupid, but I can't figure it out. I have three PRI lines connected to Asterisk, one from the phone company, and two more connected to PBXs. Asterisk uses the incoming DID information to decide which PBX to route the call to. Should be simple. Asterisk is clearly getting the caller id info from the phone company: -- Accepting call from '512345xxxx'

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

I need to check if a parameter is set so that I can build some information for my application, but No matter how I format my if statement in the file " Application.rb" it return the following error. You have a nil object when you didn''t expect it! You might have expected an instance of Array. The error occurred while evaluating nil.[] Here is the line if params[:day] So we

If Asterisk is configured as a simple answering machine replacement with the X100P connected to PSTN line. No FXS ports in the Asterisk machine. Standard phones are connect in parallel with the X100P like you would a regular answering machine. Can Asterisk detect that a phone has been picked up and cancel the outgoing message and/or voice recording? What about if the phones are connected to

I've setup SPA-3000 and when the calls come through my phone is rining almost instantly but the [demo] doesn't answer till after about 13 seconds. So I have about 13 seconds delay and I don't know what setting is causing it; here is a part of my settings from extension.conf. [from_pstn] exten => 1000,1,Goto(demo,s,1) [demo] exten => s,1,Answer ; Answer the

I have an Asterisk server running todays CVS (updated it just in case that was the problem). It has 3 X100P cards. The first two lines I use as my normal work lines and the third is my fax line which I use with SpanDSP. I run Fedora Core 4. I have a problem that the third X100P does not answer the call. From the console I can see that there is an incoming call with the following: --

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

I recently moved my Asterisk configuration to a new server and re-built Asterisk from CVS. Now, I'm experiencing the following issue with SIP: Executing Dial("Zap/1-1", "SIP/100|20") in new stack NOTICE[-1232077904]: File app_dial.c, Line 518 (dial_exec): Unable to create channel of type 'SIP' == Everyone is busy at this time Has anyone seen this issue before?

So I reached the point where my PRI is accepting incoming calls, but I cannot dialout. I must be doing something stupid, but I can't figure it out. The Asterisk box is sitting between the Mitel and the phone company, and has PRI lines to each. Asterisk was built from CVS r1-0 Log for a call from mitel heading outbound: ------------------------- -- Accepting call from '' to