similar to: Malicious Call Trace

I've been reading up on the SIP and related (SDP/RTP) RFC's and as I would expect the RTP session should ideally be between the two end points of the call, in my case the AS5300 and the 7940 which are connected on the same VLAN as the Asterisk server. When I sniff the packets on the VLAN I find that all RTP packets are being relayed by the Asterisk server causing increased load on the

Hello Osama, and Hisham, At 1330GMT there was some malicious activity coming from your network IP 37.75.210.90. Please act accordingly. Things that may be of use "972599779558" N.

Hi, Sorry for my bad english but I?ll try to explain my problem I got an Asterisk running in my house with ADSL... I?m using X100P and TDM400P cards.... My intention is get calls via PSTN to my house and Redirect to my computer in my work using X-Lite by SIP... Here?s the map with Firewalls Call for anyone to my house => PSTN => X100P => EXTENSIONS => SIP/RTP => ISA MICROSOFT

All, I've found problems in my setup with the latest couple of revisions (1.135/1.136) of asterisk/channels/chan_sip.c In my setup I have a RH9 asterisk server, AS5300 (single E1 to PSTN) and a dozen 7940's, everything is in the same VLAN and only running SIP. Outbound calls work fine: 7940 -SIP-> Asterisk -SIP-> AS5300 But inbound calls fail, I see the initial INVITE from the

Hi Everybody, I am new to Asterisk. Can anybody suggest me some link where I can find architecture level detail of this system. My aim is to find out how easy it is to port it on a new hardware (T1/E1 and POTS)? Any input is highly appreciated. Regards Arun

Use scripts to create some malicious directories. Here is my creation process. How can I prevent the creation of these directories? I used the python imapclient script to create a directory. There may be no big threat to dovecot, but it is dangerous for doveadm. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have the following setup: DS3 -> Cisco AS5400 -> H.323 (ooh323) -> Asterisk Inbound calls work great but outbound calls fail. So to check and make sure we have outbound calling ability on the DS3 we setup a Cisco Call Manager Express and it can make outbound calls both local and long distance with no problems. The failure code is Cause i = 0x8381 - Unallocated/unassigned number. We

While testing a problem with "spontaeously" and "occasionally" rebooting asterisk, I came upon this problem: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread -1210770512 (LWP 11346)] 0x002e3fe1 in pri_release_timeout (data=0x93a0478) at q931.c:2589 2589 q931.c: No such file or directory. in q931.c q931.c is in libpri, function

All, seems I too am suffering from posts to the list and being accused of SPAMing .... -----Original Message----- From: AntiSpam UOL [mailto:andersoncbr.sspam@uol.com.br] Sent: 26 September 2003 20:48 To: alow@prioritytelecom.com Subject: RE:RE: [Asterisk-Users] RTP routing.. <http://antispam.uol.com.br> <http://mail.i.uol.com.br/tirateima_txt.gif>

Hi Guys, I am calling out 416-999-1111 on Channel 1 of PRI and then calling 416-999-2222 on Channel 2 of PRI. When the two channels are going to be ZAP native bridged, both channels hangup and CLI show PRI cause (16). Asterisk Verbose *(Channel 1 already connected to party)*: -- Requested transfer capability: 0x00 - SPEECH -- Called g0/4169992222 -- Zap/2-1 is proceeding passing it

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Hi Guys, Full PRI installed in Canada with Sangoma A101DE and Asterisk 1.4.21.2, LibPRI 1.4.10. Placing a call into PRI and then transfering that call out to another number. Problem is that the call rings out but the moment the other party pickups both legs of the call are disconnected give Cause code 16.

Hi, My configuration is pri----*(te405p)---iaxclient. My * version is 1.0.7 running on tyan dual opteron board. I have several problems. 1) inbound echo For outbound call(iaxclient-->pri), there is almost no echo. But for inbound(pri-->iaxclient), I can hear distinct echo. Can Sangoma a104 or digium te406p help this problem? 2)Today i received te406p. I know T1/E1 jumper. But how can i

The problem is some calls from the PSTN have hidden caller id so if you want to change it to something else then modify chan_sip.c #define CALLERID_UNKNOWN "Asterisk" I've changed mine to: #define CALLERID_UNKNOWN "Unknown" -----Original Message----- From: Shaun Ewing [mailto:sewing@gmail.com] Sent: 22 September 2004 14:16 To: Asterisk Users Mailing List

I've having problems with a BT 2 span ISDN-30/Digium TE205P asterisk setup with outgoing calls not completing and requiring an Asterisk reset to 'unstick' span 1. Sorry this is a bit long but I'm completely out of my depth :-( This system has been in use for some while and I recently upgraded it to asterisk 1.4.24, zaptel 1.4.11 and libpri 1.4.9. I didn't change

Anybody knows what do I need to tell Asterisk to issue a re-INVITE between two SIP phone to avoid having the media going through the server? Tks, Al __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus

Hi all, I've been trying to add a custom mysql field to my CDR's, but I must be doing something wrong. I am using asterisk 1.4 and asterisk 1.6, in extensions.conf I add: exten => h,1,Set(CDR(q931)=${HANGUPCAUSE}) This extension is executed, I can see it in the asterisk console. I have added a new column in my MySQL database called q931. However, the new field does not show up in

Hi Guys, We have a problem with Caller ID not being displayed. I want to test everything to see where the problem is with the incoming Caller ID and why it's not displaying. I am tracking this down to "Presentation prohibited of network provided number" even though the Caller doesn't use *67 and even though they haven't asked their provider to block their CLID for outbound.

Hi Guys, Can q931.c be re-compiled using gcc or something else without the need to re-do the whole libpri? Some changes were made to q931.c and I want those to be reflected in .a .o .so .lo files as I think those are the files read by Asterisk vs the .c file. Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I am trying to diagnose an intermittent error when a call comes in over our PRI lines. The problem appears random, however I have feeling it has something to do with the call volume, as the frequency increases with more calls on the system. I am not an expert when it comes to reading the PRI Span Debug statements but here is a call that had a problem and I bolded, italicized, and