similar to: MWI bug ?

I have just installed * from the latest CVS and I can make calls via X-Lite to outside numbers but for only 30 to 35 Seconds at a time then Broadvoice will hang up on me but X-Lite will not know it. Once I hang up X-Lite then I will get the following error message: Spawn extension (default, Number-I-Dialed, 1) exited non-zero on 'SIP/200-6a22' -- Got SIP response 404 "Not Found"

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

Dear all, I have a question regarding the configuration of *. I have 3 port FXS, and 2 port FXO. I have 4 users that use analog phone connected to FXS (I have 3 phones). I need to limit the user's capability (user A can call International, user B can call long distance, etc). I want to implement the password say to call , he/she needs to puch 9(for outgoing call)2-4 digits password,then

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

I am just starting out with * so bear with me please. I have tdm400p with 4 fxo modules on it. When I call into the asterisk box from my mobile, I can see the asterisk console picks the call up and routes it to my computer with x-lite. There was no sound coming from either - just silence. I then decided to route it directly to voice mail to see if that would narrow the problem down, but it

Voicemail.conf in MySQL is not functioning where I get the following error from Asterisk messages log file: CLI debug output is as follows: Executing VoiceMailMain2("SIP/2205-3df0", "") in new stack -- Playing 'vm-login' -- Playing 'vm-password' -- Incorrect password '1234' for user '0' (context = <any>) -- Playing

Hi all, ------ I tried to use * over satellite, but all my effort did not succeed. The Asterisk is behind the VSAT and is resposibel for alle the SIP clients in a field location. The clients are notebooks and PDA's running SJPhoen for Windows and PocketPC. Unfortunately I could not find any Linux Client wich worked satisfying. SJ LAbs promised a Linux Version at the end of August but they

I am blessed with this user forum and able to set my Dev-PCI Digium card working fine with the Asterisk server of mine (i)But today i just wanted to know if someone can help me to set X-Ten Lite to call PSTN line using my FX0 Currently , I am able to use X Lite to call another X lite user locally (LAN) I also has attached my setting together Thanking you all in advance --------------

While setting my first couple IP phones, I set their voicemail buttons to an extension that runs VoicemailMain. exten => 8500,1,Wait(1) ; voicemail exten => 8500,2,VoicemailMain ; exten => 8500,3,Hangup ; I would like to be able to pass the mailbox number allowing each phone to go in directly but I'd rather tno have

I have a question, I am unclear on how to park a call. I know that you are supposed to be able to press "#" and then transfer the call to extension 700. However, * doesn't seem to be graping the dtmf. I am using dtmfmode=inband. Asterisk is in the media path as well. Thanks in advance Justin

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Hi, I just upgraded by 1.0.x home server to 1.2.2. Overall the upgrade went fine, but a strange problem has cropped up with the CALLERID name value of incoming calls from the X101P card. When an incoming call is presented (via Vonage ATA), the calledid value getting double quotes up from: -- Executing NoOp("Zap/1-1", """WIRELESS CALLE" <1404xxxxxxx>") in

; Below assumes you are using the same number for Voicemail boxes as extensions ; if ${RDNIS} is blank then GotoIf will go to extension 2, otherwise it will go to extension 102 exten => 8500,1,GoToIf($[X${RDNIS} = X]?2:102) exten => 8500,2,VoiceMailMain(s${CALLERIDNUM}) exten => 8500,3,Hangup exten => 8500,102,VoiceMail(u${RDNIS}) exten => 8500,103,Hangup ; you should now be able

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

Hi, compiled 1.0 on macosx latest (10.3.5). compiled fine. when running, complains about voicemail2 module. Any hints? Marc. == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing '/etc/asterisk/extconfig.conf': Found Asterisk CVS-HEAD-09/23/04-09:20:48, Copyright (C) 1999-2004 Digium. Written by Mark Spencer <markster@digium.com>

Hi all! Please I need someone that have already done an H.323 - SIP gateway to help me with some problems. I can stablish calls from a SIP telephone to a H.323, but I can't do vice versa... (problems with port 1719- when the gatekeeper tries to contact with asterisk at this port, it is unrecheable...). Please someone can help me? Regards, Mireia

Hello, I recently started playing with voicemail2. I'm having two minor problems that I can't seem to find discussed in the archives. 1) New message 0 in mailbox 7606. New voice mail message count seems to start with 0 for the first new message instead of 1. Any tricks to fix this? 2) When listening to messages with VoicemailMain2, the time stamp is in GMT and not corrected for the

Hey Guy! I want direct access of VoiceMail without asking mailbox number (Direct ask PIN). I am using following dialplan but its still asking me Mailbox number. Look like asterisk 1.8 doesn't support CALLERIDNUM variable. Do you have any idea ? exten => 8500,1,answer exten => 8500,2,wait(1) exten => 8500,3,voicemailmain(${CALLERIDNUM:-4}@default) exten => 8500,4,hangup exten

>> Wouldn't that break everybody's dialplans where they would have to >> replace all occurrences of Voicemail2 with Voicemail and all >> occurrences of Voicemailmain2 with Voicemailmain? > > No, we would register with both names. Is it necessary (with reasonably current cvs) to make any changes in the *.conf files to use Voicemail2, or is that happening

Hi, I've been playing with Voicemail and Voicemail2 a bit for my users, and there are a few things I'm wondering about: - We can specify parameters to the mailbox (s, b or u) to select which prompts to play. However, if we specify 'b' or 'u' it plays that (customisable) message, but it also plays the voicemail instructions. For the dutch, it is customary that a user