similar to: RFC2833 problems with X-Lite

Hi all, I noticed yesterday that MOH doesn't seem to work any more on my SIP channels. It works fine on PSTN calls (chan_capi) but on SIP a just get a tiny burst of sound followed by silence. I know it was working a couple of weeks ago, and I haven't made any config changes, but I have updated from CVS a couple of times. Can anyone confirm this? Jamie Neil Versado I.T. Services Ltd.

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

We've been using SIP with Asterisk for a couple of years now, and it's generally worked fine. However we're now trying to use a more complicated codec setup, and I've hit a problem with how codecs are selected that I can't get around. For a simple configuration: XLite > GSM > Asterisk where GSM is the _only_ codec selected on XLite, and in sip.conf we have:

Hi, when I make a call, chan_capi always uses controller 2, and never uses controller 1 (so I have 4 lines for incoming calls, but only 2 lines instead of 4 for outgoing calls). this is with 2 AVM Fritz cards PCI. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge e-mail: simone.vasoli[at]b-k.it cell: +39 348 0830539 tel: 0187 1874200

I'm currently running firmware version 3.2 on my Cisco 7960. I've seen on the list that several people are running the 5.x latest versions. I've avoided going to higher firmware versions because I'm worried about potential problems or issues with the encryption mechanism used in the later firmware versions. (Once you go to an encrypted firmware version, you can't go back,

What have people found to be the ideal setup for recording asterisk prompts? I'm looking for both the ideal application to record them in, the ideal format, as well as hardware (do I need a fancy studio mic or will a headset mic work?). Thanks, Justin

Using FireFly, all other codecs but G711 Ulaw is selected. But whenever I place a call, I get: Jan 24 16:07:06 WARNING[30654495]: dsp.c:1468 ast_dsp_process: Inband DTMF is not supported on codec G.711 u-law. Use RFC2833 Umm, wtf? I thought Inband was ONLY supported on G.711 u-law. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone have X-Lite build 1059 working fully with Asterisk? The GSM Codec works very well now but we have problems when using G711 in that when I setup a ping between the two sites and then watch the latency, it steadily increases and starts at about 150ms and goes up to 2500ms within about 20 seconds. I have not investigated fully but I guess that its sending ever increasing size packets.

Hi list! ConfBridge dtmf_passthrough=no doesn't seem to have any effect. DTMF gets transmitted throughout the conference. I've tried Asterisk 10.7.1 from the official RPMs and 10.8.0 compiled from source. I've confirmed that it's disabled via the CLI "confbridge show profile user <profilename>". It's an all-SIP scenario with RFC2833 as the DTMF protocol.

Hi, I have just been playing with the latest X-Lite.. It works fine with Asterisk.. As for codecs I tested G.711a/u, GSM and iLBC... iLBC is the only one that didn't work.. not sure why.. But the bigger problem is that when I call another extension that is using a Snom200 the call connects but there is no audio in either direction.. I have tried G.711a/u and GSM and while X-Lite shows that

I have a telco providing DTMF inband, they say they can't provide it any other way. This is creating headaches for me. What is the common method for SIP DTMF? Kpml, or 2833 or inband? My handsets don't support inband so I'm tying up some expensive resources to convert the inband DTMF to out-of-band DTMF... Can you recommend a vendor in US that provides SIP with DTMF in RFC

Hi, I am using asterisk 1.4.17 which is connected to a SIP trunk supporting rfc2833 dtmf events. Asterisk stays in the media path. In sip.conf I have set dtmfmode=rfc2833 for the outbound sip proxy (SIP Trunk account) and for SIP clients I have set dtmfmode=info. So when I make a call to a cell number using the sip trunk and then press digits I can see the 2833 dtmf events coming to asterisk

Hi, I've recently installed Asterisk and have got the majority of it configured (what an excellent piece of software it is, too), but I'm having a couple of problems. The first one is with music on hold! I've downloaded and installed mpg123 as specified: ># whereis mpg123 >mpg123: /usr/local/bin/mpg123 It's the correct version: >#

Hi everyone, Has anyone experience with xten.net's X-Lite SIP softphone and asterisk? I have a problem and I think X-Lite is not even trying to contact SIP proxy while dialing. Tomica ---- This mail was sent thru ZGWireless free network - www.zgwireless.net, Internet connection sponsored by Iskon Internet d.o.o. - www.iskon.hr

I keep getting the following Auto-congesting message whenever I try to dial from an X-Lite SIP phone to another one within my LAN. It's a real basic configuration but I am unable to figure out what is happening: localhost*CLI> -- Executing Dial("SIP/jay-de1b", "SIP/jtest|20|tr") in new stack -- Called jtest May 2 11:47:58 NOTICE[1133742896]: chan_sip.c:1019

Hello, Does asterisk do transcoding when the call goes through the system, codecs are the same but signaling protocol is changed. example: SIP with GSM ---> IAX with GSM What quality destruction happen when I use transcoding? I know this is not a concrete/precise question, but I would like to know how is it in general. What CPU performance is needed for transcoding 30 channels e.g. from

Hi all, Still having the one way sound problem. Any suggestions how to hunt the problem down ? Regards, Thorsten --------------------------------------------------------------- Hi all, We have a very basic * installation for testing purposes. The * is connected to PSTN with BRI and setup with X-Lite over plain lan. (local IP's) OS: Linux/Debian unstable. Asterisk CVS-10/29/03-23:46:26

Hi folks! I bought a X100P a while ago and know I've tried to get it working here at home again ... but I can't manage to get my X-Lite client working with Asterisk (CVS from a day ago) ... I've downloaded the latest version of X-Lite and I believe that I've set it up correctly ;-) But I cant get it to register with my Asterisk - I only get "Login timed out, contact your

Hi, Anyone succeed using call transfer function in X-Lite? It is stated that this feature is available in the Lite version too, but for me it doesn't work. Clicking on Transfer button, then entering the number and then clicking again on transfer doesn't work. I miss something? Thanks, Dan

Can't get asterisk to understand DTMF from x-lite. Used proposed configuration on the web. Still doesn't work. Using inband dtmfmode, still no go. Help? Vmail.cgi doesn't work as well, error says "Premature end of script headers: vmail.cgi" Shoval -------------- next part -------------- An HTML attachment was scrubbed... URL: