similar to: Asterisk user guide ..

hi .. I have an asterisk system with three TDM100P (single port FXO) cards and 10 Grandstream 100 phones connected to it .. 1st question: when i phone out or receive a call from one of the SIP phones onto the PSTN, there is a LOT of local echo in the handset .. the PSTN end of the call does not here this echo, but it's VERY annoying on the SIP end of things .. the echo seems to be about 0.3

well .. good news :) i've just put in txgain=1.0 rxgain=1.0 in my zapata.conf and upgraded the Grandstream Budgettones i'm using to version 81 of the software and all seems fine .. there is still an echo but after the first couple of seconds of call it vanishes, as the echocancelling kicks in .. so far my client is happy :) now .. i have one slight problem left .. although most of my

Hi, I installed s fresh system yesterday and it seems that zttool did not install!! ztcfg is there.. Anyone else had this problem or is it just me? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I'm trying to implement direct_media between multiple peers and an uplink provider, all of whom have direct_media=yes configures. For originating calls to the uplink provider direct_media=yes works like expected. SIP flows through asterisk, rtp doesn't SIP: enduser <-> SBC <-> asterisk 13 <-> uplink RTP: enduser <-> SBC <-----------------> uplink SBC

Hi, I am an experienced developer with Windows and familiar with Linux. I am looking for a SIP solution. 1) How does Asterisk compare to VOCAL in terms of support. 2) Is Asterisk free? 3) Where are the docs? Or even better. Where do I start? 4) Will it run on RH9? Thanks in advance. Costas -- Costas Menico Meezon Software Corp 201-224-8111 costas@meezon.com --

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

Hallo.. if you have one more for me...thanky you.... Stephan -----Urspr?ngliche Nachricht----- Von: WipeOut . [mailto:wipeout@linuxmail.org] Gesendet: Donnerstag, 10. April 2003 19:28 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] Asterisk-Redhat 9 install guide. Hi, Not sure if anyone will be intersted but I have put together an install guide for Asterisk on RedHat 9.. Its

Hi Samba world, Have been struggling with this for the past 10 days, we are running Samba 3.0.22 on VCS zone, we have end users saving files onto Samba mapped drive, and complained that it 5mins to save 300 files, now it takes 30 mins. There is recently a change in the topology. Before Enduser ----------- samba mapped -------------- server (local attached storage)

Hi, I have been trying to figure out why the S100U is not performing very well on RH9.. Here is my thinking..( may be totally wide of the mark but here goes anyway) I remember reading somwhere that the sound system used by RH has changed... Does the S100U not depend on the sound subsystem?? So what I think is that the sound subsystem in RH9 and the S100U are not happy working together.. Does

Hi, Is Asterisk (or can it be set up as) a SIP proxy? Thanks -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

I wonder how IAX compares to SIP bandwidth-wise? I've tried both over overseas IP connection, and somehow SIP seemed to work better. Peter

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

Hi, Do the g729 codec licenses for Asterisk work on a SIP environment (only SIP UAs running g729 + Asterisk)? I would like to buy a couple for a SIP test lab but I have not found any documentation on wether it works for SIP UAs or not. The Digium page only mentions: "The G.729 codec works with all Digium cards." Can somebody tell me please? Thanks, Ricardo Villa

just three "stupid" questions I need to ask .. 1. what's the sequence to press on a SIP phone to transfer a call to another extension. 2. what's the same thing if you want to hold an incoming call, speak to the other extension, then pass the call? 3. what's the extensions.conf syntax to dial two SIP extensions at once? many thanks Dave

Hi, Does the G.729 module support adding more licences??

Hi, Not sure if anyone will be intersted but I have put together an install guide for Asterisk on RedHat 9.. Its nothing special but it may be of use to the newbies.. Like me.. If you would like a copy let me know and I will send it to you.. later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I am in Australia and I have a friend in the USA. We both have asterisks installed and dial tone. What is the easiest way to set us both up so we each have an extension number to call each other on? Also, There is a lot of information in the Asterisk's manual. Has anyone produced a quick start guide? I could certainly do with one. Thanks --Geoff (the novice). -------------- next part

hi, it'd be very useful to include the quota warning patch in official release. without it the quota support is not really useful since mail simple dropped when quota is over. and most enduser never know what happend, they just recognize mails are not coming:-( thanks. -- Levente "Si vis pacem para bellum!"

Hi all, Is there any alternative hardware components for multi port FXO cards, other than Single and E1 or T1 level? For example 4 or 8 port FXO card is ideal. Also the price matters. Thanks!