similar to: Supplementing Current phone system

Has anyone integrated Asterisk for Voicemail with a Nortel Meridian phone system or know if this could be done? Thanks, John Haigh

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

Hey gang, I'm looking at escaping from a Nortel Meridian CISC system to Asterisk/Digium/SIP phones. I'm currently in the testing and proof of concept phase. I'm going to need a SIP phone and don't want to re-purchase and have "orphans" around. We currently run Nortel 7310 phones and they work great. I'm sort of overwhelmed by all of the different IP phones. I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

Hi, Some time ago, there was a discussion about the inability of nortel meridian pbx to dial analog tones thru an meridian ATA, and the work arround was to enable 808 function that makes the dtmf tones long for the current call. The nortel meridian is connected via a nortel ATA to a TDM400 to a FXO port. Anyone can say me who to actually use that function (you dial something or is pbx

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above

Hello all, I have Asterisk 1.2.1 and a TE110P connected to a Nortel Meridian Option 81C system. The PRI line is currently setup as DMS100. Here are the relevant lines from zaptel.conf and zapata.conf: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone = us zapata.conf: [channels] language=en context=from-internal musiconhold=default switchtype=dms100

I've tried to do it myself, but my head is now bleeding from hitting it on the wall so much. We need someone who knows asterisk and Meridian PRI cards to help! If required, we will pay for a day's consultancy in order to get this thing working. Or, do I need to scrap my plans to keep the meridian system (60 phones ...) ... Please say no .. :) Please contact me offline

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

I've googled / voip-info'd / searched until my eyes are blurry, but couldn't see the info I was looking for. I've turned here for help! Asterisk CVS head (9/7/04) Fedora Core 2 (updated to 2.6.6 kernel) DE405P (jumpers set to E1) I want to put asterisk in the middle of our current pbx (Meridian Option11) Currently the meridian has a 2MB pri EuroISDN card linked via a rj-45 into

We have a client with a Nortel PBX with digital phone sets. Due to T1 problems (old firmware), we are interested in trying a FXO channel bank. Is there a channel bank (or equivalent) which emulates Meridian digital phone sets? In order words, an FXO channel bank that's Meridian digital? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings to one and all on this fine list; We have the current system: Meridian 1 Option 11 +-------------------+ | | ISDN/30 (DASS/2) ===> |NTAK79BB (2MB Pri) | | |<-->4x16 port Digital / 1x16 port Analogue ISDN/30 (EUROIDSN) ===> |NTBK50AA (2MB Pri)

I have been investigating more tight integration between * and the Nortel MICS... it appears that it is at least theoretically possible to have * store voicemail and log which stations call where. Both require a T1 card. The T1 card requires either a clocking module or the 6-port fiber module to provide T1 timing. Naturally a T100P or TE405P is required on the * side. To log which

Looks like we will be forced to make a move on our voicemail system as Nortel has declared Meridian Mail an end of life product. Frustrating thing is that it would seem their only reason for it is so they can force our hand to move to Call Pilot. Is there any documentation and feedback out there of how people have used Asterisk as a voicemail system for a legacy PBX? We've got about

I have a couple of questions I'm hoping folks can help me out with. When I search the mailing list, I see folks doing what I'm interested in so here's hoping ! - How are people making out with interfacing to the 7960? I'm considering buying a number of these as they look quite feature rich. But, are they easy to interface to? - Will I be able to interface with softkeys on

What models? Jeff Noxon (jeff-asterisk at planetfall.com) wrote*: > >I just purchased a bunch of Nortel Meridian POTS phones that support >intercom on the 3rd pair. I intend to get it working with Asterisk. >The phones support MWI, have a 3-line display, callerID, call waiting >callerID, 2 lines...very nice. > >On Thu, Feb 27, 2003 at 01:07:19AM -1000, James H. Thompson

I have had the opportunity to test many IP phones in the last 6 months and I thought you might enjoy a quick review of what I have found. Grandstream Budgtone 200 - Poor Quality for business use- Looks good, and the handset feels nice, buttons have a decent feel, but the disply is difficult to read when you are not directly over head of the phone, plus the sound quality of the handset, and

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I