similar to: Ideal Prompt Recording Setup?

Hi all, I noticed yesterday that MOH doesn't seem to work any more on my SIP channels. It works fine on PSTN calls (chan_capi) but on SIP a just get a tiny burst of sound followed by silence. I know it was working a couple of weeks ago, and I haven't made any config changes, but I have updated from CVS a couple of times. Can anyone confirm this? Jamie Neil Versado I.T. Services Ltd.

Hi, I've managed to get X-Lite (v2 build 1050) working pretty well with *, but am having problems with the DTMF signalling. I've used inband signalling with no problems on the uncompressed codecs (G711), but obviously this doesn't work with the compressed ones (GSM). However when I try to use RFC 2833 it doesn't seem to pick up "0" properly. For example if I dial the

Hi, when I make a call, chan_capi always uses controller 2, and never uses controller 1 (so I have 4 lines for incoming calls, but only 2 lines instead of 4 for outgoing calls). this is with 2 AVM Fritz cards PCI. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge e-mail: simone.vasoli[at]b-k.it cell: +39 348 0830539 tel: 0187 1874200

This is Off-Topic for Asterisk, but I wanted to get some feedback on headsets for Cisco 7940/7960 phones. We have about 10-20 people who wants/needs a headset for their phone & was hoping to collect some real-world input. Thanks!!

I'm currently running firmware version 3.2 on my Cisco 7960. I've seen on the list that several people are running the 5.x latest versions. I've avoided going to higher firmware versions because I'm worried about potential problems or issues with the encryption mechanism used in the later firmware versions. (Once you go to an encrypted firmware version, you can't go back,

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

Hello, I'm having the following problem when using a headset on XP connected to an on-board Realtek soundcard on an AsusTek M2N68-AM Plus motherboard: - Using any sound recorder (Windows', Audacity, XLite), the level is just too low when speaking at a conversational level, even with the microphone level pumped all the way up (line displayed totally flat in Recorder)

I work for a call center and we are looking at using asterisk to have our operators take calls. Our message taking software records all the calls on the operators computers. Right now we use these recording controls from radio shack that plug in between the wall jack and the phone and plug in via a 1/8 inch stereo connector to the mic input on the computer. If I buy an IP phone I can't do

To all: I am having an echo problem with X-Lite and iaxComm. I am using the monitor speakers and a desktop microphone. My problem is that the sound from the speakers is repeated by the microphone causing an echo that is annoying. Is this correctable? I have searched throught this archives and played with various settings but have not been able to fix this. I have purchased a couple if

The last time I wanted to record a voice announcement on my computer was a few years back, and as I recall I hooked up my Microsoft Lifechat headset and used Audacity to do the recording. Now I want to record a "recitation", which consists of me playing my piano and talking over it. I have a Casio CDP-230 digital piano but I've never tried hooking it up to my computer and making a

Hello! Did some search about this issue of mine ,and didn't find anything that helps me solve this issue. I dont have mic input from my usb headset in wine. (I tryed 2 different headset and even analog mic in). The mic works natively with alsa, I can record sound from this mic. But I can't seem to make it work under wine. I added the headset in .alsarc file and I see the headset when I

> Many thanks Julian. Are you looking for the pinout for a single plug 2.5mm (cellphone) headset or a dual plug 3.5mm (computer) headset? -- Nabeel Jafferali Tel: +1 (416) 628-9342 Toronto +1 (646) 225-7426 New York FWD: 46990 Email/MSN: nabeel<at>jafferali.net

We've been using SIP with Asterisk for a couple of years now, and it's generally worked fine. However we're now trying to use a more complicated codec setup, and I've hit a problem with how codecs are selected that I can't get around. For a simple configuration: XLite > GSM > Asterisk where GSM is the _only_ codec selected on XLite, and in sip.conf we have:

How do I make my headset work. Before I try it with anything else, I'd like to make it work with arecord and aplay. VLC and movie player can make sounds with my external speakers. though not in my headset yet. I've got an insignia NS-PAH5101 headset. As directed, the red connector is in the pink spot and the green connector in green spot in the back of my computer. arecord folloed by aplay

I'm trying to find a voip-suitable USB headset (I.E. headphones + microphone) which I can use with my laptop while I'm traveling and using Firefly or another softphone. I'm currently using a Logitech headset which works well (except the echo it generates toward the other caller when I turn up the gains too high), but it just doesn't carry well - in fact, I can't carry it in my

On Tue, Mar 06, 2018 at 04:12:58PM +0100, Fabian Arrotin wrote: > On 05/03/18 19:53, Fred Smith wrote: > > Hi all! > > > > I've finally been reduced to having to install Skype on my Linux box. > > I resisted for years, but now ended up trying it. > > > > and while the latest RPM installs just fine, it refuses to acknowledge > > that I have a

Hi all! I've finally been reduced to having to install Skype on my Linux box. I resisted for years, but now ended up trying it. and while the latest RPM installs just fine, it refuses to acknowledge that I have a microphone! In fact I have two: 1 in the USB web cam (it finds the cam), the second in a Plantronics USB headset, which works fine but not with skype. it is as if it doesn't

Hi I've whined about this before, but now I feel the overwhelming urge to whine some more. Forgiveness begged... :) I've spent some very frustrating times trying to get a microphone to work when doing skype calls. According to the various sound tools available on Centos all the various mics I have (built into webcam, analog headset, USB headset)produce sound just fine. but when using

An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20040715/b3253d77/attachment.htm -------------- next part -------------- ? Hi, I have some queries: I am using speex in Windows platform. 1. I am having some problem with the speex,for input 8KHz,8bits/sample mono stream i am getting output as 8KHz, 16bits/sample mono stream. I would like to know

What headsets have people found work well with the Cisco 7940 and 7960 phones? To date, I have tried a couple of the headsets within the Plantronics H series (H41-N), and noticed that the volume of my speaking is lower over the headset than on the regular handset. I am currently looking for headsets that are known to work well. I do know that Cisco lists the H-91 and H-101 as certified to