similar to: 7960 / MGCP

When I drop my file into the outgoing folder, the call is completed but the 'Context' entry is not respected. Instead, it drops into the default context. It does drop "properly" into the default context and function as would be expected. I looked through the source but didn't see any reason it would be completely ignoring the context. Call file: (where

It just dawned on me as I was playing with the manager interface - it can't be very difficult at all to write an Win32 app that serves as a "lamp field". Between 'Newchannel', 'Newstate', and 'Hangup' events, all of the information is there. I've heard several requests for line appearances, but mgcp and sccp channels don't currently include support.

I'm in the process of setting up a test/demonstration system to show that VoIP is realistic and applicable for our needs. We put a 7905 and 7960 on a request for quote that went out the other day (to people like CDW & Microwarehouse). All of the vendors returned thier quotes without including the Cisco phones. So my question: where do you buy your phones? We can't buy direct from

We currently have a Merlin Legend system. The voicemail is falling apart (with the transition to a 10 digit timestamp on Sept. 8, 2001, the system locked up and refused to take calls; the official solution is to change the system time back to a year with a matching calendar). We are in the process of preparing the network infrastructure to support a VoIP system with Asterisk, but won't be

I've been trying to find a way to connect incoming calls to my cell phone when I'm not in the office. I would like to have asterisk call the cell phone (or any other phone for that matter), and provide me the option to connect to the call. I figure I could park the call, use /var/spool/asterisk/outgoing/ to generate a call to the cell phone and put it into a context somewhere. Now

Does anyone have any suggestions for excluding certain users from the directory? Can I just leave the 'Name' field empty in voicemail.conf Certain voicemail boxes shouldn't show up in the directory (company president, etc). I assume this can be handled safely by just leaving out the 'name' in voicemail.conf To go a step further, it would be good to allow them to put the

I have asterisk running as a voicemail system off of our Merlin Legend switch. We replaced our old Audix Voice Power (when the power supply fan died and burned it up) with asterisk a week ago. Many thanks to those who provided information about integrated VMI on the legend. The Audix system would, after a mailbox was closed, wait a few seconds, then use that line to dial the switch and update

swar sir, can u please unsubscribe me for your list b.regards jihad chalhoub --- asterisk-users-request@lists.digium.com wrote: > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, > visit > > http://lists.digium.com/mailman/listinfo/asterisk-users > or, via email, send a message

I am trying to dial a mgcp extention from my sip phone and i am getting this error message. anyone got any idea? error I> -- Executing Dial("SIP/2204-5dc2", "MGCP/aaln/1@10.0.1.150") in new stack May 19 22:30:01 NOTICE[1251156800]: chan_mgcp.c:1104 find_subchannel: Gateway '10.0.1.150' (and thus its endpoint 'aaln/1') does not exist May 19 22:30:01

Hi, First off, a big thanks to Digium (Mark, John, and Martin) for helping sort out a BellSouth config issue on our PRI. T100P working like a champ! Now it's back to tweaking the configuration on our SIP phones (7960s). The message_uri parameter in the phone's configuration file is working great. Dials comedian mail directly. Is there a way to let voicemail2 know what the incoming

Hello: I want to receive calls from my SIP proxy and re-route them to one of the analog lines on my Cisco VG200 ia MGCP and Asterisk. Inbound SIP calls will arrive with the five digit called number preficed with an "m" by the proxy. I'd like to them match these calls against a rule like exten => _mXXXXX,1,Dial(MGCP/aaln/1@128.100.10.11) . This however results in an error.

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

Hey guys, can you shead some light on this? I will copy my mgcp.conf and post below, but here is the problem. I can't get call waiting to work with my MGCP device. I already have one call going, and I can hear the second call come in, I flash over to it, but all I get is a dial tone, * puts the 1st call on mute/hold, but I never get the second, and it terminates. I flash back over and pick

Hello I have a problem with my MGCP voice gateway. I use D-Link DG104S Boot PROM Version 3.0B38-D Firmware Version 3.0T86-D I tried asterisk v 0.7.2 and I am using latest CVS version now. When I dial a number very fast, or when I use a redial function, my asterisk receives coupled digits. My co-worker called number 245005111, these are a few lines of my debug. The identifier of first digit

Can anyone tell me what MGCP error that I'm getting means? The hardware is a MRP200 in a Cisco 7750 PBX. (Its a FXO blade with 2 slots, first one has a 4 port FXO card and the second has 2 port FXO card. It recognises those correctly, at least to the point of this error.) MGCP Debugging Enabled MGCP read: NTFY 13 aaln/S0/SU0/0@MRP200-S1 MGCP 0.1 X: 1adace42 O: L/hd from

> Hello all, > Can someone help me on the problem which I have on MGCP phone test . I test mgcp - asterisk- zap. But I got several NOTICE message from rtp.c. > NOTICE[20501]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support > incomplete. Turn off on client if possible > > -- Endpoint 'aaln/1@VG101-1-1' observed '9' > NOTICE[20501]: File rtp.c,

I have 1 IP phone (Swissvoice IP10S) and 1 POTS phone. When I dial the number for the IP phone off the POTS phone, the IP phone rings. But when I pick up the handset on the IP phone, I get a busy signal and this message on *: Aug 23 09:38:57 NOTICE[1142106560]: chan_mgcp.c:2243 handle_response: Terminating on result 502 from svip10@00059002042b-1 Here is the entire session. svip10 is the 1 and

Hello, I`m try to make the attended transfer work Dlink DG-104S via FLASH, when somebody calls my phone I pickup and press flash to get a second line to call another extension. When I press flash I hear no dialtone, and only a long and then small beep. When I try to dial digits I hear again those long+short beeps, but the extension dialed is not ringing. If I pres flash again I get back to

I've been trying to figure this one out for a while, but to no avail. I have my cisco ubr924 setup for MGCP with Asterisk as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2. Any help is appreciated. from mgcp.conf: [ubr924] host=65.37.86.203 context = from-sip (just as a

I know this is not the most appropriated list to this, but I will try: Does anyone know what is the criteria to the generation of the transaction identifiers in MGCP? I mean, are they generated by a randomic method? I'm using Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP,