similar to: Sip call question

What's the secret to getting sound through Xlite? The SIP messages all look OK to me, but the sound isn't coming through. It was trying to use GSM, so I searched the archive and tried: disallow=gsm allow=ulaw Now it says that it's using ULAW but I still get no sound in either direction. Phil Skuse (MBJEJPIEUI) <phil.skuse@vicorp.com>

After reading about these $75 SIP phones on this list, I purchased a couple for evaluation. They do work with asterisk - and are good value for money, but as somebody commented: they are not yet perfect. I just wondered if anybody had managed to get either the message-waiting indicator or the conference button to work? Phil Skuse <phil.skuse@vicorp.com>

I'm trying to use H323 for the first time so please forgive me if I've made a mistake here. I have downloaded and compiled the latest versions of pwlib, openh323 and asterisk. I have dtmfmode=inband in h323.conf, but the remote system is not hearing the DTMF. Running a trace reveals the following... 1:08.398 ThreadID=0x00022012 h323.cxx(4594) H323

How do I get asterisk to populate the "Calling Party Number" field in an H.323 call? I have asterisk configured to accept a SIP call and connect it to an H.323 IVR system. The call goes through, but the caller id is put in the "Display" field rather than the "Calling Party Number" field. -----Original Message----- From: Skuse, Phil [mailto:Phil.Skuse@vicorp.com]

Hi, My company wants to put a SIP address on their website. The idea is that potential customers can call that address and will be forwarded to our main switchboard. It's fairly easy in theory because my asterisk server has a real IP address, so any calls to sip:<number>@asterisk-server.mycompany.com should connect just fine (except currently it will be blocked by the firewall). Our

I updated to the latest CVS yesterday, from a version several months old. On one of my extensions, I have an AGI script in priority 1. Previously, the AGI script would run and when it terminated, asterisk would move on to priority 2 and connect the call. But now, when it terminates, it starts all over again in a continuous loop and never gets to priority 2. Do I need to update the priority in the

If I try to create a clearcase view on a Windows 2000 Server share then it creates a subdirectory tree. If I try it on a Samba share, it creates the first directory correctly with the right user mapping and permissions and then returns permission denied. I am able to manually create files and directories on the samba share using explorer, so I guess that clearcase must be using some different SMB

We have an h.323 based IVR platform. When we make a call to it using an h.323 phone, it can see the callers number (ANI), but when we make a call to it via asterisk, the call goes through OK, but we don't get the number. How can I make this work? h323.conf ======= [general] port = 1720 bindaddr = 0.0.0.0 disallow=all allow=alaw dtmfmode=inband [ivr] type=h323 context=default extensions.conf

Hi helpers, I seem to have a problem of intermittent DTMF tones being played during a conversation. Eg: Extn 100 takes an inbound call and all is fine. Except, at an undetermined time the person on extn 100 will here a DTMF tone for no apparent reason (it's not the caller pressing buttons). The caller doesn't hear the tone - only the called person. The call itself progresses normally.

Ok I have an * server finally setup and acepting calls from freshtel and I am VERY impressed at how well the Freshtel.net service works but thats another subject :) I have it all setup so that I can Dial my DID number on freshtel and that gets set to my * via IAX. At the moment I have the demo configured so that I can test it all and make sure it is all working. The problem is that I

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

Folks: does anybody have an idea? how to capture the DTMF digits to a file, after an extn asnwer? then POST it to a url? Regards, JR

Hello, I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my <mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on ONE Digium card. What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my *

Are there any Snom 200 users that have two extns defined on their phone? I've been trying to get two (or more) extns defined in such a way that when extn #1 rings, LED #1 flashs; extn #2 rings, LED #2 flashes, etc. (Answer greating will be different depending upon which extension is called.) I can get multiple extns to register and work with * just fine, but regardless of which extn is

On 12/25/2014 01:43 PM, Ady wrote: > >> >> >> On 12/25/2014 04:33 AM, H. Peter Anvin wrote: >>> On 12/24/2014 12:16 AM, Robert Yang wrote: >>>> Hello syslinux, >>>> >>>> Merry Christmas! These patches will make extlinux work with umounted >>>> ext2/3/4 filesystem, for example: >>>> >>>> $ extlinux

Here is the current dial plan section: [custom-michael] exten => _900,1,Playback(custom/extn-xfer) exten => _900,2,SayDigits(${EXTEN}) exten => _900,3,MixMonitor........... exten => _900,4,Dial(SIP/${EXTEN}|${DEFRT}) exten => _900,5,Playback(custom/extn-xfer2) exten => _900,6,Goto(custom-michael,901,4) exten => _901,1,Playback(custom/extn-xfer) exten =>

Hello Sir, Could provide the solution for the below error ? chan_read_failed for istate 3 Thanks and regards Chandra Prakash Vela Global Operations - Production Engineering Services Computer Sciences Corporation India Private Limited C-24 ,Sector 58,Noida -201301 USA: 1-302-781-1010 Extn. 1957 UK: +44 (0) 870 850 3512 Extn. 1957 Australia: 1800 137 784 Extn. 1957 India: +91-120-2582323

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command