similar to: Any dialing tricks...

Hi, I'd like to use DISA properly for my case - I'd like to handle it right, if user when in DISA doesn't dial any number - how does Asterisk return from DISA cmd ? I'd like to dial some default number if user doesn't dial anything or give him some message - but I don't know what gets executed after DISA if nothing is dialed .... I'm reading this on wiki, but

How does one do translation for calls that come in from other pbx's where the incoming caller ID is an internal extension number on their pbx? Eg. when I get a call from Free-World-Dial the CID shows up as "429102" which is essentially their internal extension number sans any routing prefix. To dial the number back I need to dial the extension with FWD's routing prefix

What I'm looking to achieve: Incoming calls to me extension will ring for 15 seconds. After that, I want the calls to forward to my cell phone and attempt to get through for another 30 seconds. After 30 seconds, I would like Asterisk to timeout the call, and goto my Asterisk voicemail. I've got the call forwarding down, but I'm using Nextel for cellular service, which loves give

DISA is currently disconnecting when I dial 8888 to access DISA. Below is my extensions.conf file from A@H and some lines which shows the disconnect. Should DISA be loaded as a module in modules.conf? When I do a 'show applications' i see that DISA is there. Help! -------------------------------------- ;Asterisk CLI as I placed a call from cell into the system. Playing

Hey, this is happening to anyone who I try this with. We get into the DISA, then hear the dial tone. Dial 1 then start dialing the number, and it hangs up. I thought adding a wait time after the DISA may help, I was wrong. Here is what I have thus far in the DISA extentions. [DISA] exten => 7,1,DISA(no-password||"Scheda" <565> 455-1337) exten => 7,2,Wait(45) exten =>

-------------------------------------------------------------------------------------------- Originally posted at http://forums.digium.com/viewtopic.php?t=18045 -------------------------------------------------------------------------------------------- Hi! I'm trying to configure a DISA setup (Asterisk 1.4.11). Only, executing DISA seems to prevent any DTMF detection capability when using

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

Hi Folks, I'm trying to test out Asterisk overall. I'm having some problems with DTMF. Currently I'm playing with DISA, but I'm worried this will happen when I get to implementing AAs etc. I have a free SIP trunk from IPKall that I'm trying to make work. I'm able to receive calls, and I've now setup and extension with DISA and a password. I connect ok from the

Hello all. This is my very first message to the list. I have a TDM400P card, It has 2 FXO channels which are connected to extensions of my PBX (Ericsson BP250), so I can dial from any SIP softphone directly to physical (analog and digital) extensions on my company. My PBX is configured so when I dial 8 on any extension, it will redirect to the first free FXO channel on my TDM400P card.

Dear list, I have problems with DISA on an specific server with Asterisk 1.4.26.2. After starting DISA I can only press one key and DISA is jumping direct into the context without waiting for further digits. In dtmf.log I found this: [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin '7' received on SIP/214-00d92db0 [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin passthrough

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

I'm having trouble getting an AGI exec command to spawn app_disa. The script executes properly, but does not spawn DISA. The CLI gives no helpful clues. Am I doing the exec incorrectly? I want to have a way to authenticate callers to the extension by Caller ID... if their caller ID is in my database and set to active, they can call out. [like a calling card but auth'd by CID instead

Couldn't see the forrest for all the fascinating tree-like applications that are out there: For future reference, see: http://www.voip-info.org/wiki-Asterisk+call+parking :-) -----Original Message----- From: Kris Boutilier [mailto:Kris.Boutilier@scrd.bc.ca] Sent: August 11, 2004 1:10 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Inband announcement of parking slot from

Hi Friends, I am facing a strange problem with DISA. I have installed and configured Trixbox. I've created a secret extension i.e., 555 and called this extension in Digital Receptionist using custom extension i.e., created in extensions_custom.conf file. When I call from my mobile phone to my PSTN number, which is connected to FXO port, my IVR is responding. After entering my DISA

We are using DISA with local SIP users. The user enters in a 2 digit code then they get a dialtone and the phone dials out. The problem is that the calls waits 10 seconds after the outgoing number is dialed, no matter what I put for the timeout values. Anyone else using DISA that has run into this? exten => _2X,1,Answer exten => _2X,2,DigitTimeout(2) exten =>

Lists, ? ? Hi, good day, i was being task to create a DISA access for internal purpose of the company, i'm having a problem to work with it with authentication, but i think it's really a straight forward thing to do, can someone enlight me on this. thanks ? sample code snippet ? ???? exten => 5,Goto(inward,s,1) ? [inward] ? ?????????? exten => s,1,Disa(1234|outgoing) ?????????? ;

Hi ! Did anyone had issues/managed to solve issues with DISA over Zap channels on * 1.0.X (STABLE) ? I have a situatuion where DTMFs that should be recognized in DISA work over SIP channels and do not work over ZAP channels (Zap channels are on TE110P) I have in default context: exten=> 299,1,DISA(no-password|default) and I have SIP extension 200 in [default] and I have Zap trunk which

Hi I am using DISA to get my Polycom SoundPoint400 with H323 firmware to connect to * I have it working, but when I dial SIP end points there is no ringing tone on the phone. DISA gives dial tone but does not give ringing (if I understand correctly it is because it expects to transmit sound created by terminating side of the call) Is there a way to make DISA application to generate ringing

Is there any known reason that the DISA() routine should behave differently than WaitExten() as far as recognizing DTMF tones? If not, I suspect there's a bug here. Try it yourself--two DID's on our PRI, numbers below let you test each routine: It is my observation that some setups/phones DO and some DO NOT express this variance. --I could not show any variance on a sprint mobile phone

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.