similar to: Using 2 PhoneJacks with Asterisk for Data calls.

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

Sorry, if this question has been asked before. I have redhat 9 and asterisk installed. I would like to know how can i make work the phonejack with asterisk.

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

If you have any quicknet cards you are not using, I may be interested in them. I'll discuss terms after I know what you have. For sake of high shipping costs, I'm not interested in overseas shipments to the United States (where I live). My best resources will be for those that have PCI PhoneJacks, or PCMCIA CardJacks. Please reply to my email address, and not the mailing list.

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

How will this fare? I am planning on putting an asterisk box for my brother in the Philippines but they only have dialup internet. I want them to be able to use a telephone set on a phonejack or linejack card and call me and vice versa via VOIP. My setup in the US is working already with a broadband cable connection. I am thinking that dialup may not work because of the bandwidth required

Perhaps this will help... I have a phone connected to a QuickNet PhoneJack card. When I pick it up, I get a dial tone. When I dial a certain number of digits, the call is processed by Asterisk. The question: How does Asterisk determine how many numbers to let me dial? I'm banging my head against the desk here... _9XXXXXXX lets me make an outbound call, but _9X. only lets me dial 9 plus

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

My thoughts on this after reading Steven's very politically worded reply is that IMO your best bet would be to go with RedHat, I am not going to go into details about the if's, when's, why's, and but's.. I am running Asterisk quite well on RedHat 9 and if you like I have created an install guide for setting up an Asterisk box on RedHat 9 which I can send to you if you are

Hi Everybody, I am new to Asterisk. Can anybody suggest me some link where I can find architecture level detail of this system. My aim is to find out how easy it is to port it on a new hardware (T1/E1 and POTS)? Any input is highly appreciated. Regards Arun

Hi Timo, I have another problem, this time with user shared folders: User "markus" shared the folder "ForTest" to test: SETACL "INBOX/ForTest" test akxeilrwts dovecot-acl and shared-mailboxes.db have been successfully updated. As user "test" the folder (and "#User" namespace) is not visible. When I configure the shared namespace with

The device is seen in linux pnp: isapnp: Scanning for PnP cards... isapnp: Card 'Quicknet Internet PhoneJACK' isapnp: 1 Plug & Play card detected total and I've installed the drivers from the openh323 dev... but I can't get * to see it. Does anyone have experience with this? THanks. -Dave. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

Hi list, I have a asterisk box with an E400P that was running ok until last week. The machine just stop responding and after a reboot, the module (tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7

i have a lot of questions, maybe you've got some answers. I've got the following setup : 1 central server ( linux ) , 17 servers ( LTSP ) on different locations, where each server has a number of thinclients connected to it ( max 6 ) The central server / 17 LTSP servers are on the internet and share 1 VPN ( freeswan ). It would be nice if the 17 LTSP servers could use asterix on one

Hello all, I'am trying to use 2 gnophones on my LAN. But I can't get any sound. Here is my configuration: 1. on PC1, I have: - Asterisk compiled from CVS (CVS-05/15/03) and it runs. - Gnophone binary version from Debian: 0.2.4+cvs.20020624-3 - a sound card working ( module es1371 for /dev/dsp) - I registered it as "alice" in extensions.conf 2. on PC2, I