similar to: Use dialing plan from h.323 gatekeeper?

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm wondering if there are any plans on adding secondary gatekeeper support to asterisk h323 channel drivers. Also I've noticed that chan_h323 is crashing asterisk at startup if primary gatekeeper is not available. Wouldn't it be a more correct behavior if it doesn't crashing but continue registration attempts in the background? Didn't test it with chan_oh323. Thank you.

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

I have built Asterisk on SuSe Linux 7.3 on an Ultra 2 Sparc WorkStation. I am listing the modification I had to do for the benefit of anybody else who wants to use Asterisk This workstation is equipped with one 400 MHz RISC UltraSparc II CPU, 256 MB RAM, Two 9 GB 10,000 RPM UltraSCSI Disks. I have a gatekeeper running on this machine, I had to do the following modification to build * on Sparc:

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hola! I'm using asterisk as H.323 -> PRI gateway. First call goes thru ok, second concurrent call fails with: Aug 6 11:52:30 DEBUG[737292]: chan_h323.c:1038 setup_incoming_call: Sending to context [ip2pri] -- Executing Dial("H323/ip$192.168.32.25:60271/984", "Zap/1/9541163107100") in new stack Aug 6 11:52:30 NOTICE[753677]: app_dial.c:554 dial_exec: Unable to

I'm having trouble registering my asterisk to a cisco gatekeeper. I do not have control over the gatekeeper, and I know that it has user info defined in an LDAP. I have a user name and a password that I can use, but I can't seem to get Asterisk to register on the gatekeeper. I can't find exactly how I'm supposed to define the gatekeeper in the h323.conf file. This is the response

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hi all, I try to ask helps again about chan_h323 extensions. I define this in h323.conf: [general] port = 1720 bindaddr = 0.0.0.0 allow=gsm allow=ulaw gatekeeper = DISABLE context=default [gm1] type=friend host=192.168.1.20 context=default [gm2] type=friend host=192.168.1.25 context=default and I have in extensions.conf : [demo]

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

Hello everybody, First time installer and I need the lists advice. My plan is to use asterisk PBX with some hardware to terminate my calls coming from several operational gnugk gatekeepers. Do have RH9 and downloaded the latest asterisk from CVS. Compiled according instructions and is running fine. Could hardly find any info on h323 implementation untill the REAME in the channels directory.

Just thought I'd share my success with chan_h323 and our Symbol NetVision phone (4046-100-US). Voice quality is excellent, and setup was trivial. The new NetVision firmware (4.21) is much better than the 3.x stuff. It gives the phone a whole new look and feel. The hardest (and longest) part was getting OpenH323 compiled. After that, H.323 ran out of the box. I simply uncommented

hi just after talking to Jeremy, I downloaded the source he's using and compiled. core dump! This was without gatekeeper: (gdb) bt #0 0x40141118 in mallopt () from /lib/libc.so.6 #1 0x401400fc in malloc () from /lib/libc.so.6 #2 0x405e981b in PAbstractArray::SetSize(int) () from /usr/src/pwlib/lib/libpt_linux_x86_r.so.1 #3 0x405ed006 in PString::SetSize(int) () from