similar to: Using multiple iconnecthere accounts

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN} Well,

Symptoms: when calling my iconnect phone number (13033913323 in my bogus example below) from my cell phone, I can see that the call makes it to my asterisk server, and my phones even ring once as * passes the call through during the "180 Ringing" period. However, it seems that iconnecthere.com cannot see my "100 Trying" and "180 Ringing" messages, as they

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

I am going to have to find a fix for this problem or I'm going to have to quit using iconnect. About one call in 10 or so, iconnect's gateway gives me an error (console output appended below). So upon receiving the error, which as a 4XX error means, "Fatal," asterisk gives up and drops the call. But not iconnect!! The phone at the other end starts ringing, and rings

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

I currently have two fax machines on my system. Both of them seem to send and receive very slowly. My end users are complaining; saying it was faster before we moved to * (Straight Analog Lines) Any help would be great. PS: I already have the d option on the Dial line. Both fax machines are in their own context: [faxes] exten => _9NXXXXXX,1,StripMSD,1 exten =>

Hello-- I'd like to do a little processing on external phone numbers from within the asterisk pbx. Fairly simple stuff, but... devilishly hard to make it work so far! 1. I'd like to dial 9 to get an outside line. 2. If the number dialed after the 9 is 754XXXX, I'd like it to go thru unmodified. It's the only local number available here. 3. I'd like all 1 XXX XXX XXXX numbers

I have an IconnectHere account with a Inbound number and have setup the sip.conf to register and am recieving the call but When I answer the call it disconnect. I have tried sending the call to from * to a Softphone, Pingtel, and FXS port and all result the same. As soon as I accept the call it disconnects. I believe it may be some type of codec issue but I am not very familiar with that layer.

I can't get the callerid feature to work when being passed through iconnecthere. Is it even possible to specify your own callerid using iconnecthere? -sip.conf- ... [iconnect] type=peer username=xxxxxxxx password=xxxx callerid="Jerky McJerkface" <(555) 867 5309> host=213.137.73.178 -extensions.conf- .... exten=>_1NXXNXXXXXX,1,SetCallerId,4168675309

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

Hey I need another pair of eyes on this! I would like to add phones numbers to the blacklist from any handset so I did this: exten => _*66XXXXXXXXXX,1,StripMSD,3 exten => _XXXXXXXXXX,2,DBPut,blacklist/BYEXTENSION/1 exten => _XXXXXXXXXX,3,Hangup However what I get in the database is: /blacklist/BYEXTENSION : 1 And BYEXTENSION is not replaced with the actual number

This may be slight off topic, but perhaps it has relevance: My iconnecthere account no longer works for "inbound" calls through NAT using the standard configuration that they provide on their website. I have sent them a message, but I believe it will be flushed down the toilet by the first-tier support people. When I call my iconnect number, it goes directly to voicemail. There

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

For the past several days I can no longer use iconnecthere with asterisk. It is broken in BOTH directions; I can neither make nor receive calls. On outbound calls I get an immediate error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 On incoming calls, the call switches through OK, and for a few seconds I get audio in both directions, although much

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

If this handles the case where 10 digits are required: exten => _9NXXXXXXXXX,1,StripMSD,1 exten => _NXXXXXXXXX,2,Dial,Zap/4/BYEXTENSION How do you create a handler which works for either this or the case with a leading '1' plus 10 digits? tnx -kim -- w8hdkim@gmail.com