similar to: FW: ATA 186 in Australia

Hi All, I'm looking at setting up a Asterisk system, and hope to use ATA 186's with it. Im in Australia, and am getting mixed answers to if its the I1 or I2 i need, does anyone have any experience with using ATA 186's in Australia Also, can anyone recommend a good place to obtain these locally? Cheers, Steven

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

Hi all, do you know any firmware release which fixes that issue for cisco ATA186? ATA 186 3.x.x Cisco ATA 186 v3.* CANCEL requests can be sent with a completely bogus URI, making it impossible to cancel a call. bug no workarounds This is from: http://www.communigate.com/SIP/SIPProblems.html. In other words, you make a call, other side doesn't pickup, then you hang up,

I've done something similar at home, but made my dialplan such that I can dial either 10 or 11 digits locally. I don't use a "throw away" digit at all. Any 7, 10, or 11 digit call will be appropriately mangled and sent out the PSTN / VoIP provider. ________________________________ From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On

Hey all! I'm having problems trying to set up an ATA 186 with my Asterisk box. When I get the phone to place the call, I type the extension and I only get busy signal after 5 seconds. So I can't call my Asterisk box from my ATA and either call from my Asterisk to my ATA. Does anybody know what can be happing? Log is attached.. tks regards Oz -------------- next part -------------- >

To whom it might concern, The Gesko Ikarus 1200S analog telephone has advanced callerid capabilities. When used with an ATA186, it show the username and the phonenumber of the caller. (or whatever you let * tell it) http://www.gesko.be/idgg004.htm Price is 77 euro something and available with Telec. (NL) Met vriendelijke groet, Pauline Middelink -- GPG Key fingerprint = 2D5B 87A7

I have seen the list of codecs for the ATA 186's but not sure if it was 100% or not. I want to know really is it possible to run GSM or ilbc on them or is a G729 lic the only way to get a low bandwidth codec? This is the list of codecs that I have seen. RxCodec and TxCodec?Configure the codec ID. * G.723.1?Codec ID 0 * G.711a?Codec ID 1 * G.711u?codec ID 2 * G.729a?codec

Chinese Diplomat Step out to Expose Communist Regime at Sydney 6.4 Rally --- Chinese Communist Party is collapsing from Inside 2 million people quit CCP June 4, 2005 marks the 16th anniversary of Tiananmen Student Massacre. Australian Democrats, Greens representatives and human rights groups spoke at the Rally that intends to remember the pro-democracy students killed on Tiananmen Square and 80

I can buy a new ATA186 here, but it is sold with a 1-port user license UK, for euro 192, but does that license stop me from using both ports? I can't read the license agreement till I buy the thing, so I don't know what i'm buying... Michiel --

I have two ATA186 running 2.14 and 2.15. I see in the SIP debugs that both ATAs keep on sending SIP registration packets over and over. The flow is as follows: Asterisk receives REGISTER packet Asterisk sends 100 trying, 200 ok with an expire of 3600. Kurt __________________________________ Do you Yahoo!? Yahoo! Finance Tax Center - File online. File on time.

Does anybody know of an ATA that works well with * and supports T.38 fax relay? The Cisco ATA186 does not support T.38 and I don't think the Sipura does, but I don't know for sure. I'm not talking about running fax over an ATA with g.711, I want actual support for T.38. Thanks. Peder

Hello All, We are running Asterisk on a linux server as a SIP proxy with Cisco ATA 186's at the subscriber end. For long distance we have iax2 connectivity with a ip carrier. For local calls we are routing out through a commercial VEGA voicestream pots unit to an adtran channel bank and then from there to our class 5 soft switch. The sip to sip calls and the long distance calls work great.

I have an ATA186, a tech just told me to set UID0 and UID1 to the same username, and PASS0 and PASS1 to the same password. In my mind, this would seem to have the unit registering twice under the same account, which Asterisk wouldn't support. When a call comes in, it should go to the last line to register. So to me, this means the call could sometimes come in on Line 1 and sometimes on Line

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

Just wondering if there is a reason PPP support is compiled into zapata by *default*: # Uncomment for Generic PPP support (i.e. ZapRAS) # KFLAGS+=-DCONFIG_ZAPATA_PPP Especially since the comments imply that it should be commented out by default... The main reason I ask is because I usually try to re-compile the kernel to only include the bits that I need, and so I don't include PPP...

For some time now some have been working on a winIAX client, plus others.... Now basically as I have mentioned before (& no one has correct it) there are 4 types of clients.... 1) Softphones, eg msn, xten etc using all computer hardware. 2) Softphones plus hardware, eg: a usb type adapter (mind you there are some things not common available with these yet. 3) Hardphones, basically your

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

Thanks a lot for all the suggestions! Unfortunately, it still gives problems. Most common error message is "ast_realaudio_callback Failed to write frame" after "paying the beep". Then it says "User disconnected". Also, it doesn't react to any extension entered and doesn't do any forwarding (as it should in "exten =>