similar to: Minimum budget question ...

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf

Hi :) My employer is looking to move a call centre to a new office, and has been increasingly frustrated with their legacy PBX (call-logging licensing and hardware upgrade costs). So I've stepped forth as the Open Source Pedant and suggested Asterisk so we can do all our own CallerID / call logging / analyses, and make use of IP Phones / teleworking, etc. The problem begins in that I only

Hello, I consider buying three GrandStream GXW4024 and connect 72 analogue phones to asterisk Do you have any feedback how well it works with Asterisk ? I am on a budget, do you have other recommendation for similar setup that get into same budget - connect around 70 analogue phones to asterisk. Thanks in advance. Peter

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me:

Dear Telcotype Braniacs, I have tried doing a google search to find out what this switch looks like, what the physical interface is, but havn't been successful. I am quite new to the ISDN world so I'm not sure what to expect when I see this switch. Does anyone have any experience connecting to this switch? The following is basically all I have been given for info: 1) Ericsson, AXT121,

I have used 3Com 3c509 nic width bnc coax. I have experienced that these cards used width FreeBSD and Samba is unusable due to speed. I tried to change the 3com card with a NE2000 compatible card, and there was a major change in speed. Has anyone else experienced such problem. Asgeir Stangeland

So I won one of these on ebay, in the auction it says it has the RJ45 ports on it but it doesn't :( If I were to get an analog adapter would I be able to use the video portion of this or am I SOL? The auction requires me to pay for shipping back, so I end up losing money unless I sell it on my own. Or has anyone hacked these to work on enet?

Hi, I am looking for a budget IP phone that can use preferably iLBC or GSM codecs.. Suggestions?

There is an optinal header field in the power budget table we can use to read out the power cap of the GPU. The meaning of this header field was confirmed with nvidia-smi -q: The rows "Min Power Limit", "Power Limit" and "Max Power Limit" are set to the "min", "avg" and "max" values from the referenced power budget entry respectively.

On 11:55 am - Nov 12 2016, Karol Herbst wrote: > v2: Set entry to 0xff if not found > Add cap entry for ver 0x30 tables > Rework to fix memory leak > > Signed-off-by: Karol Herbst <karolherbst at gmail.com> > --- > .../include/nvkm/subdev/bios/power_budget.h | 24 ++++ > drm/nouveau/nvkm/subdev/bios/Kbuild | 1 + >

On 12/01/2016 08:56 AM, Karol Herbst wrote: > 2016-11-30 23:48 GMT+01:00 Ben Skeggs <skeggsb at gmail.com>: >> On 12/01/2016 05:48 AM, Karol Herbst wrote: >>> v2: Set entry to 0xff if not found >>> Add cap entry for ver 0x30 tables >>> Rework to fix memory leak >>> v3: More error checks >>> Simplify check for invalid entries

There is an optinal header field in the power budget table we can use to read out the power cap of the GPU. We should have this in the kernel before actually using it to catch errors and see how reliable this is, but as it seems it works on all GPUs as expected on Kepler und Maxwells with the power cap field set in the vbios. This series keeps things really simple for now until we figure out

There is an optinal header field in the power budget table we can use to read out the power cap of the GPU. We should have this in the kernel before actually using it to catch errors and see how reliable this is, but as it seems it works on all GPUs as expected on Kepler und Maxwells with the power cap field set in the vbios. This series keeps things really simple for now until we figure out

On 25/10/16 00:11, Karol Herbst wrote: > Signed-off-by: Karol Herbst <karolherbst at gmail.com> > --- > .../include/nvkm/subdev/bios/power_budget.h | 20 ++++ > drm/nouveau/nvkm/subdev/bios/Kbuild | 1 + > drm/nouveau/nvkm/subdev/bios/power_budget.c | 108 +++++++++++++++++++++ > 3 files changed, 129 insertions(+) > create mode 100644

Hi, I've some analogic lines and I'm asked if it's possible to program an asterisk for "checking" the inbound calls without answering them, doing something like this: analog line 1 -----+---------- asterisk | \______ analog phone when a call enter, asterisk sense it and store its values (callerid, date and time, etc) somewhere, but

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me:

There is an optinal header field in the power budget table we can use to read out the power cap of the GPU. Sadly it is optional and if that field isn't sad, things beome complicated. Anyhow, this is good enough for most cards and we can use it later for capping the power consumption of the GPUs, but first, just export those values through hwmon. First design, will change stuff, want

On 12/01/2016 05:48 AM, Karol Herbst wrote: > v2: Set entry to 0xff if not found > Add cap entry for ver 0x30 tables > Rework to fix memory leak > v3: More error checks > Simplify check for invalid entries > > Signed-off-by: Karol Herbst <karolherbst at gmail.com> > --- > .../include/nvkm/subdev/bios/power_budget.h | 25 +++++ >

Hello, I've got a client who wants to go ssl. He's running a web server, smtp/pop, and ftps and imaps is coming as well. I'm looking for a wildcard ssl certificate i believe it's called but one on the budget plan. I am also wanting to ensure that the mod_ssl with httpd on the server is only using the strongest encryption methods and protocols. Thanks. Dave.

does any one know if Grandstream BT 100 has a 'do not disturb' function ? one of the BT's is not picking up calls all of a sudden out going is fine but when you dial in you get forwarded directly to voice mail. thanks