similar to: Today's CVS version hangs on alsa module

Hi I?m a new user and I do test with my hardware . I have a x100p and telephone vozip. And when I run this command asterisk ?vvvvc for to test it . My computer show it ?warning? [chan_iax.so] => (Inter Asterisk eXchange) == Manager registered action IAX1peers == Parsing '/etc/asterisk/iax1.conf': Not found (No such file or directory) Apr 2 07:45:12 ERROR[16384]:

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

I have just installed the Alsa drivers for my 2.4.18-14 kernel (RH8). I have configured the sound card ok with alsaconf and tested with the aplay , works fine. But when I run asterisk it says.. ------------------------------- [chan_alsa.so] => (ALSA Console Channel Driver) Apr 20 18:28:34 ERROR[8192]: chan_alsa.c:339 alsa_card_init: snd_pcm_open failed: No such device or address Apr 20

>> See if it plays back properly. > > Running aplay as asterisk user seems to be no problem: > > asterisk at puppy$ aplay /usr/share/sounds/alsa/Front_Center.wav > Playing: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit > Little Endian, Rate: 48000 Hz, mono > asterisk at puppy:~$ aplay -Dpulse /usr/share/sounds/alsa/Front_Center.wav >

Asterisk doesn't work with the latest CVS of ALSA (2003-06-24) . The module chan_alsa.so won't load even if the oss module, chan_oss.so, isn't loaded. There are no error messages. I've been chasing ALSA/Asterisk/client problems in one form or another for some time now. In previous versions of Asterisk and ALSA -- i.e., last week -- I could load either chan_oss.so or

I recently upgraded a server to Asterisk 1.4.22 with OpenR2. Previously I was using 1.4.18. It seems that 1.4.22 has a big bug using chan_alsa.so for overhead paging. After rebooting the server it would work once or twice and then I just got an error on the CLI: [Jan 7 10:35:14] ERROR[26164]: chan_alsa.c:693 alsa_read: Read error: Resource temporarily unavailable I had to switch to chan_oss

All, I'm trying to setup asterisk to run off of a raspberry pi and use the alsa module to access the sound card (a usb logitech 270 camera/mic). Everything appears to be working except the audio quality is very (very) poor and there is an error from the asterisk conosle: Loading chan_alsa.so. == Parsing '/etc/asterisk/alsa.conf': Found [Sep 6 17:57:29] WARNING[4562]:

Hello, I have asterisk 0.5.0, asterisk-oh323-0.5.6, openh323-1.12.2 and pwlib 1.5.2 compiled and installed. I have modules alsa 0.9.8 compiled and installed My PC have and audio card ac97 chipset intel i810 in motherboard. The list of the modules loaded is: namor:/etc/asterisk# lsmod Module ? ? ? ? ? ? ? ? ?Size ?Used by ? ?Not tainted snd-pcm-oss ? ? ? ? ? ?35652 ? 0 snd-mixer-oss ? ? ? ?

Skipped content of type multipart/alternative-------------- next part -------------- [root@LINUXVM root]# asterisk -vvvc == Parsing '/etc/asterisk/asterisk.conf': Found Asterisk 0.4.0, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= == Parsing

Hi, I would like to express my appreciation to your big efforts. I am enjoying Asterisk very much. My Asterisk works very well, but I encountered a segfault at voicemail after pressing # to end the recording. Please see the log below. My asterisk is running on RedHat 8. When booting the Asterisk, I found a WARNING around IAX, and it says "Unable to open IAX timing interface: No such

Hi! I just installed Asterisk 0.4.0 with all the default options, and the configuration samples it has. When I try to dial from an h323 client (gnomemeeting) I get this message on the messages file: Jun 19 11:48:45 WARNING[15375]: File file.c, Line 410 (ast_openstream): File demo-congrats does not exist in any format Jun 19 11:48:45 WARNING[15375]: File file.c, Line 553 (ast_streamfile):

I'm trying to somewhat reduce the security risk of Asterisk, by loading less modules. In my installation I use SIP and IAX2 for incoming calls, and that's it. No voicemail, no call parking, it just plays back voice clips. I can remove /etc/asterisk/modules.conf modules one by one: ------------------------------------ [modules] autoload=yes noload => pbx_gtkconsole.so noload =>

Hi, I get the following message when I try to run Asterisk. This happened after I changed some of the configuration files: extensions.conf, zaptel.conf and zapata.conf. I have both TDM40B and X100P cards and am trying to use them together. Please let me know if there is something else I should do. Thnx, Gladys [chan_local.so] => (Local Proxy Channel) == Registered channel type

i'm having this error message when trying to run the agents-feature Sep 2 17:37:40 WARNING[10445]: pbx.c:1645 pbx_extension_helper: No application 'AgentsLogin' for extension (from-internal, 28, 1) while chan_agent.so is beeing loaded i still don't seem to have access to the commands like agentlogin or agentcallbacklogin. my agents.conf and queues.conf are configured correctly

I have a pretty basic Mandrake 10.2 w/KDE 3.2 and I installed Asterisk-1.0.1-2mdk. I installed the source of main and contrib from ftp, so at the install time I accepted all the packages needed to be installed too. The installation went smooth, but when I try to execute asterisk (#asterisk -vvv) I encounter few warnings I end with an error. At this point I didn't touch any conf file, I was

Hello, I can't get the sound over alsa to work with Asterisk. My current version is 1.4.21.2~dfsg-3 running on debian stable. All settings are the default ones with exception of: /etc/asterisk/modules.conf: load => chan_alsa.so noload => chan_oss.so /etc/asterisk/alsa.conf: input_device=default output_device=default asterisk is started up and doesn't complain about alsa in

Hi all, Just did a fresh checkout, compiled ok and when * starts it bails with the following message: [chan_alsa.so] => (ALSA Console Channel Driver) asterisk: pcm.c:5476: snd_pcm_sw_params_set_silence_threshold: Assertion `val < pcm->buffer_size' failed. Alsa rpms installed on this RH9 box: alsa-lib-devel-0.9.3-2 alsa-utils-debuginfo-0.9.3-2 kernel-module-alsa-0.9.3a-2_2.4.20_9

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

When starting *, I get the following when the chan_iax2.so loads: [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) == Manager registered action IAXpeers == Parsing '/etc/asterisk/iax.conf': Found WARNING[16384]: File chan_iax2.c, Line 4980 (set_config): Ignoring port for now == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2)) == Using TOS