similar to: Newbie questions.....

Check to see if you can get a IOS code leverl that supports SIP on the 6500. then maybe you can use your E1 card directly. you can also get a SIP version of the code for the 7960's etc Dave >>> jwi@weball.csis.dk 6/28/2003 2:56:12 PM >>> Hi Chris I've done a lot of things with Cisco AVVID solutions in the past. > CallManager).....am I right in saying that Cisco

ive had enough of cisco unity and microsoft exchange and im looking for alternatives to our voip system. right now, we have 3 cisco callmanagers, 1 cisco ip icd system, and 1 cisco unity voicemail system. all phones are cisco 7940/7960's and some ata186/188's. voice gateways are cisco vg200's with pri cards (5 total). im running h323 on the gateways and phones are of course

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following

Hello everybody, im newbie in VoIP, but find this project asterisk very interesting, i tried to install and its a great sw, i really get sorprised about all of its functions, we need to use the asterisk server in conjunction with cisco callmanager. We have a Cisco Callmanager 4.1 and the clients are softphones from cisco IPCommunicator, but all the support service of our company are linux

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

I am new to Asterisk and currently work mainly with Cisco Callmanager. With Callmanager I can setup partitions and call search spaces to determine where a given phone can and can't dial. Does Asterisk offer this type of functionality, and if so how? Blake Parker -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to connect Asterisk 1.4 and Cisco CallManager 5 using SIP Trunk without MTP (media termination point). Howerver, Cisco 79xx phones do not support RFC2833, they always notify CCM5 via SKINNY channel no matter where they send RTP to. For non-MTP trunk there's Out-of-band DTMF support in CCM5 called "kpml". I wonder if Asterisk can support it. I found an

Hi all, I'm writing my graduation theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what

I've noticed that a few people here are from Australia. I'm wondering where you all get your hardware from. I'll probably order some of the X100P cards from Digium soon (and possibly some FXO cards), but for other things such as ATAs, etc. However - these obviously aren't ACA compliant. Does anybody know of compatible hardware (for POTS lines) that is ACA compliant? The cheapest

Hi everybody, I will receive my CISCO 7960G tomorrow. I've ordered it as a "global spare" without any callmanager licence. Now I don't know if I can get firmware-updates so could please someone send me the SIP-firmware? Is the default firmware the "skinny" one? Wich would be better to use with asterisk? Thank you very much

To be clear I meant using Chan)_h323 with Call Manager where CM is configured with * as a H.323 gateway, not client. CM supports H.323 to direct calls through gateways, and in fact until recently that is all they supported. They now also have MGCP, but only to their IOS platforms, and SIP is coming soon. There are NO sccp-based gateways, from Cisco anyways. Dan -----Original Message-----

I'm trying to set-up Asterisk server and I would like to buy 2 SIP phones. Has anybody tried Cisco 7960G? Or 7940? What audio compressions can I use with this phone and Asterisk? Reason why I'm asking is because Cisco supports G.711 and G.729a audio compression (probobaly some tohers but they are not listed on data sheet) and on Asterisk features i found that it supports G.729 but need

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi ! We have Cisco 7912 phones, and the doc says that I can "create up to four speed dial buttons on my phone using the Cisco CallManager". Does anyone knows which protocol is used to configure speed dials (Is it documented somewhere) ? Did someone tried to reverse engineer the protocol ? It would be cool, not having to pay $15000 just for configuring speed dials on those phones ;-D

Hi there We have a Cisco VOIP environment here, with hard and softphones. I have a softphone account/etc, but I'm a Linux user and (as far as I'm aware) there is no Cisco softphone for Linux. However I can run Asterisk. So I was wondering if there is a way to "convert" a SIP phone transaction into a SKINNY transaction so that the Cisco environment thinks it is a Cisco

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

For those of you running Cisco phones, did you start out with a Cisco CallManager and move to Asterisk? And if you did switch do you find that you or your users are missing features they once had? How have you handle the issue? Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at