similar to: Samba Setup Fails or Samba Access Fails

Hi all. I'm trying to set up one of my Unix machines at home so I can access my stuff there via SMB from the Internet at large (read: from Windows-using clients'). I'm behind two NATting devices-- the lame-p Prestige DSL modem provided by Sprint DSL (a.k.a. Earthlink?) and a more typical home DSL/cable gateway device. I've poked holes in BOTH of these devices on ports 137, 138,

Hi I have been facing a strange connectivity problem from CentOS and Fedora boxes. When I telnet to $ telnet adp.eease.com 443 it works fine some times and every 5-10 tries or so it says connection refused. And this does not happen from my windows box. Can anyone from this list try this on their linux installation and see if they get the same behaviour? Thanks Tharun

Hi All, I'm really struggling with a bind problem on C6. bind runs split external and internal dns for a few zones. I had to change the motherboard in my server and the ethernet device name changed from eth3 to eth4. I've updated my firewall rules to accommodate that change but bind in not resolving when accessed externally. If I telnet to port 53 from outside my LAN I get a

I have a Smoothwall server on my network and am running three network interfaces off it. 1) local LAN 192.168.0.0 with PCs and an internal dovecot server on 192.168.0.154. 2) internet interface 3) DMZ 192.168.2.0 which has a linux web server 192.168.2.1 on which I want to install a webmail so I can access my email remotely. Originally 192.168.2.1 couldn't see the 192.168.0.0 network but with

Hello Sorry for the (I guess) simple question, but: I have 7 computers under one 8-port router (D-Link DIR-100, firmware v1.13EU) in my network (actually in a sub-network) and they do not see each other's host names. The router has the 'DNS relay' option enabled, and all 7 computers use the router as the DNS server, which in turn will forward DNS requests to the ISP DNS server.

Greetings, we are trying to setup puppetdb, nut our clients get the following error: Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 400 on SERVER: Could not retrieve facts for lxa7t.unix.lan: Failed to submit ''replace facts'' command for lxa7t.unix.lan to PuppetDB at puppetdb:8081: Connection refused - connect(2) Info: Retrieving

hii guys i have some issue with dns in samba 4 i have install and setup 2 samba dc in different Site site2 dc joint to site1 dc, with internal dns topology : site1 --- openvpn server --- firewall --- wan --- openvpn client --- site2 192.168.1.0/24 192.168.2.0/24 in site1 i have some application let say email server: mail.local.lan > 192.168.1.2 web server : web.local.lan > 192.168.1.3

Hello. I apologize in advance for my question -- it's seemingly trivial, but I've spent countless hours on its solution to no avail. Basically, I have two tinc servers: Home: Ethernet adapter LAN: IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Ethernet adapter

Am 05.05.2016 um 16:18 schrieb Gary Stainburn: > I've tried the changes that I put below. Users are still able to log in from > the LAN. > > However, despite putting the appropriate rule in my firewall allowing port 143 > I cannot create a user on a PC outside my network. > > I'm using Thunderbird to do the testing. Is there a better way to test my > setup?

Hi, Unable to do peer probe... and unable to figure out whats the reason from the gluster log. can someone help ? 1) This is what i was trying... gluster> peer probe llm19.in.ibm.com Probe unsuccessful Probe returned with unknown errno 107 gluster> peer probe 9.124.111.25 Probe unsuccessful Probe returned with unknown errno 107 gluster> peer status Number of Peers: 1 Hostname:

Hi there, I''ve read Routing on One Interface, and Shorewall and Aliased Interfaces docs but I''m a little confused, and all my test attempts have mostly failed. Here is my setup: CentOS 4.2 ShoreWall 3.0.2 My server has a subnet 192.168.50.0/29 routed to it via 192.168.1.2. Currently 192.168.1.2 is setup on eth0. With no ShoreWall involved routing seems to work if I just setup

I have installed rsync on my PC (NT) and a windows 2000 server. It appears the 2 boxes are unable to talk. I get following errors: C:\Program Files\rsync>rsync.exe -vv test\* 172.17.13.31:C:\test opening connection using rsh 172.17.13.31 rsync --server -vv . "C:\test" > 172.17.13.31:Connection refused rsh.exe: can't establish connection rsync: read error: Connection reset

Hello, I am not able to use ftp and ssh on the lan. Both the port are open. I have the lines on the rules file : # Accept SSH connections from the local network for administration # ACCEPT loc fw tcp 22 # # Accept ftp connections from the local network for administration # ACCEPT loc fw tcp 21 Thanks in advance Varun

Hello! I have a Linux box that has a HP LaserJet 5L printer connected to it and Samba (2.0.3) providing a print service for Win95 clients connected to the LAN. How can I make Samba NOT ask for a password whatsoever when a Win95 client connects to the print service? I also have a printing related problem: when I print something from a Win95 client it comes out fine, but I always get an extra

I guess I've been lucky. My Red Hat server I built in 2003 finally gave up the ghost yesterday. Fifteen years with almost zero problems running 7x24. Now I'm trying to build a basic server to host my e-mail using CentOS 7, Sendmail and Dovecot. Server is running great as are Sendmail and Dovecot but Dovecot only allows connections from the CentOS 127.0.0.1. I can telnet localhost pop3

Hi, I want to be able to specify actions for different classes of traffic in any of these four ways, and I''d like to use only HTB if possible: 1. No guranteed rate, No ceil 2. Guaranteed rate, No ceil 3. No guranteed rate, Ceil specified 4. Guaranteed rate, Ceil specified For types 2, 3 and 4 there can be several classes of each, with different rates and ceilings. 4 is ofcourse easy.

Can someone help me with this problem: My host on the DMZ is inaccessible from the WAN on port 25. I tried to telnet but getting: $ telnet 66.58.99.84 25 Trying 66.58.99.84... telnet: Unable to connect to remote host: No route to host My shorewall/proxyarp is: #address interface external haveroute 66.58.99.82 eth1 eth0 No 66.58.99.84 eth1

While I''m in temporary retirement, I''ve decided spend a little time experimenting with new things and making some updates to the web site. The biggest result of this effort to date has been: http://shorewall.sf.net/Shorewall_Squid_Usage.html This outlines how to use Squid as a transparent proxy running on the firewall, in the DMZ or in the local network. In the latter two

I just install Centos 7 on my laptop. I have also installed telnet-server and telnet. I can telnet to other server from my local CentOS 7 but can not telnet localhost also, i can not telnet to my localhost from other server. I try to check telnet file in /etc/xinetd.d directory but the file "telnet" is not there. Please can someone help me with the steps to install telnet or enable

I'm all up for reading and looking round for people in the same boat to try and solve the issue together, but there appears to not be large community yet, just the asterisk mail lists. I got Asterisk working with X-Lite great now for internal calls and also calling land line numbers etc. The two problems i'm currently having are: 1. When someone calls in the phones ring 3 times then