similar to: call rejection with chan_capi

Good day, *newbie alert* I try to run * with capi_chan (and later on SIP). System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4 HW: AVM B1 ISA / Celeron 400 / 128MB RAM Starting * the following ends up in the messages Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line 2925 (load_module): Unable to get our IP address, MGCP disabled Jul 22 19:47:03 WARNING[16384]: File

Hi, I am trying to configure a Diva Server 4BRI to work with chan_capi. Here are the steps that I took: - compiled fresh kernel with new-style CAPI support: i4l_divas_1.2 - got the divactrl_1.2 utilities, configured the card startup scripts, - rebooted, card firmware loaded properly, "capiinfo" displays detailed info on 4 controllers, however there is an error message: FAC REQ -

Hello, I am using chan_capi 0.3.5 and Asterisk CVS-v1-0-12/29/04-15:32:48 on a SuSE Linux 9.0 with Kernel 2.4.21-99-default In the system is a AVM C4 with one port connected to PSTN at PTP BRI and another one to an ISDN PBX with an PMP BRI. The system is running fine, but I have regualary this error, and then chan_capi is not working anymore. Jan 18 15:29:46 WARNING[2919]: Avoided initial

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

hi all it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with chan_capi. Both channels seem to work, but not at the same time. And - yes - they're connected to different NT boxes :) Any ideas? kapejod? -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open

>>0.4.0? who is working on chan_capi? long time with no updates from. >>I'm rewriting the chan_capi logic. >> >> > >kapejod already did 0.4.0-PRE1, which I use as base for cleanup, fixing and >new features. > >What exactly are you rewriting? If someone else is working on chan_capi, we >should synchronize our work and ideas. > > yes

Hi, What is the correct chan_capi dial syntax?? This is what I think it is.. exten => _90.,1,Dial(CAPI/[msn here]:${EXTEN:1}) This seems to work for local numbers.. but I have an access number for cheap long distance calls.. wich gets dialed and then the number I want to call is sent as DTMF after a few waits (w).. On my X100P I used the following.. exten => _9001.,1,Dial(Zap/1/[access

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i'm in debian sid 3.1 with kernel 2.6.7, * last cvs & chan_capi 0.3.4b; nt1+ with 2 bri in ptmp (http://www.voip-info.org/tiki-index.php?page=DDI) i tried to install avm c4 following step by step http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20connect%20with%20CAPI step 1. i compiled capi 2.0 support in kernel

After apt-get update && apt-get upgrade -y wget http://www.junghanns.net/asterisk/downloads/chan_capi.0.2.5c.tar.gz tar xfvz chan_capi.02.5c.tar.gz cd chan_capi-0.2.5c make && make install shutdown -r now asterisk seg faults upon calling in via ISDN. Any ideas are greatly appreciated. rgds pos

Hello all I found a bug in the chan_capi driver (really a not implemented message handling and then a false error condition) and I guess I have wrote a patch to fix it (basically I searched the internet for other capi open source implementation an borrowed the code snippet) but I don't know where to send the report and bugfix. I also found some miss-behaviours that I would like to share

hi all talking to this friend if mine just now, I realised I had no 'micky mouse' sound as eaerlier with chan_capi and AVM C2. We talked in 1 hour and 18 minutes without encountering any problems whatsoever. This was him calling me, but I don't know if that's important. roy -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356

I have been using chan_capi and a Fritz AVM (passive) card for a little while now.. So far so good.. There are still a couple of things I am not totally sure about.. First.. What is the difference between "softdtmf=0" and "softdtmf=1"?? Which is the preffered/recommended option?? Second.. What is Early B3 all about?? Should I be using it in my dial string?? Which is the

Ok.. I have done some more digging and the problem seems to be caused by chan_capi not detecting that the call has been answered.. I downgraded chan_capi from 0.2.3b to 0.2.2 and the system is working fine.. Kapjod, do you know of this problem? Later.. > I seem to be having problems with my 2 asterisk systems.. > > This works.. Call originating from the PSTN and then routed to the

I have an ISDN card, Billion ISDN PCI Card I tried to use the ZAPHFC, I patched the kernel, I did anything (also followed reccomandation on use on Suse Linux Professional 9.2 --my box is) using bristuff last version. In the end I succesfully compile zaphfc, but I am not able to use the card (a lot of problem running zapcfg, a loto of problem starting asterisk saying about wrong anything (from

Hi all, I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers wich came with the distribution using the distro installer (yast2). I?m experiencing problems with outgoing calls so I?ll try with chan_capi instead of chan_modem. The point is that I?m having problems with the compilation:

OS: Redhat 9.0 Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci

Hi there, the subject says it all... I get the following error messages: ---- mmielke@pbx:~/chan_capi-0.3.5> make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c

I am trying to compile chan_capi 3.3.4a, but I end up with lots of gibberish. Near the top it states that capi20.h doesn't exist. Searching for the file, several show up: # find / -name capi20.h -print /usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h /usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h

I've got a brand new Eicon Diva Server BRI card and I want to configure it with Asterisk. I managed to get asterisk and zaptel to compile and install, I've compiled and installed the drivers for the Diva card and now I need to compile and install the chan_driver for chan_capi. Unfortunately this fails miserably. I get the following messages: I'm using: Kernel 2.6.16.37.4,

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1