similar to: Strange Issue with connected TA 750

Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 E&M wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup E&M in zaptel.conf and EM_W in zapata.conf. They

On 03/06/15 22:04, ivenhov wrote: > Thanks Rowland. > I understand smb.conf is bit messy and can affect performance but it should > not prevent me from joining domain. > > Here you go: > > [global] > workgroup = MYNAT > realm = MYNAT.MYCO.BCU > server string = My server %h > security = ADS > password server =

Hai, After reading all below i can only conclude this must be firewalling, as Rowland is saying also. check if all of these ports are acceccable for the server your trying to join. tcp 0 0 192.168.X.1:1024 0.0.0.0:* LISTEN 2146/samba tcp 0 0 192.168.X.1:135 0.0.0.0:* LISTEN 2146/samba tcp 0 0 192.168.X.1:139

On 03/06/15 21:29, ivenhov wrote: > I reproduced error WERR_DEFAULT_JOIN_REQUIRED in two scenarios: > - user account that is used to join machine to domain is not part of Domain > Admin group. > - OU path for computer (specified in createcomputer) is invalid > > In both of those cases I'm getting detailed error messages: 'insufficient > access' and 'invalid

On 03/06/15 23:54, ivenhov wrote: > I've made all changes to 3 files you mentioned, also removed everything > except localhost in hosts file. > SO I have minimal smb.conf and minimal krb5 file > > Unfortunately error is still the same. > > If I try to join with full OU path I get kerberos_kinit_password > testuser at MYNAT.MYCO.BCU failed: Cannot contact any KDC for

Has anyone on the list been able to locate and try out the 1.1.0 firmware? It was released in November, but I have yet to get my hands on it. The Polycom site has way more docs online, but the link to the firmware only brings up the release notes. -sb

Hi! ivenhov skrev den 2015-06-04 10:10: > I'm trying > > sudo net ads join -S dc1001.mynat.myco.bcu -U testuser -d10 > > and also > > sudo net ads join createcomputer="My/Ou/For/Servers" -S > dc1001.mynat.myco.bcu -U testuser -d10 > > > It works for me every time in lab on real hw (same spec) and on virtualbox. > It's just this particular site

I make classification tree like this code p.t2.90 <- rpart(y~aa_three+bas+bcu+aa_ss, data=training,method="class",control=rpart.control(cp=0.0001)) Here I want to set weight for 4 predictors(aa_three,bas,bcu,aa_ss). I know that there is a weight set-up in rpart. Can this set-up satisfy my need? If so, could someone give me an example? Thanks, Aimin Yan

Hello All, Quick question here on equipment selection. Is there any benefit to using a bunch of Adtran 850's with RCUs over 850s with BCU L1 to interface with the T400P. I'm looking at building a PBX with 7 channel banks. 6 x 24-port FXS and 1 x 24-port FXO. Would the RCU give me any advantage/functionality over the BCUL1? Thanks, Scott

Caller*ID used to work as some point, but I can't seem to get it going these days. The card is a x101p. I've tried going up and down the rxgain scale. Can the txgain effect it at all? When I plug in a phone into the line with a splitter it can decode caller id with no problems. Reading through the mailing list archives hasn't given me any move clues. Any ideas?

I have a full data set like this: aa bas aas bms ams bcu acu omega y 1 ALA 0 127.71 0 69.99 0 -0.2498560 79.91470 outward 2 PRO 0 68.55 0 55.44 0 -0.0949008 76.60380 outward 3 ALA 0 52.72 0 47.82 0 -0.0396550 52.19970 outward 4 PHE 0 22.62 0 31.21 0 0.1270330 169.52500 inward 5 SER 0 71.32 0 52.84 0 -0.1312380 7.47528 outward 6

Hello, I use nnet to do prediction for a continuous variable. after that, I calculate correlation coefficient between predicted value and real observation. I run my code(see following) several time, but I get different correlation coefficient each time. Anyone know why? In addition, How to calculate prediction accuracy for prediction of continuous variable? Aimin thanks, > m.nn.omega

Thank you both for the answers. I'll re-check everything again once on customer site and post my findings shortly afterwards Regards -- View this message in context: http://samba.2283325.n4.nabble.com/Cannot-join-Ubuntu12-04-Samba-4-1-17-to-domain-tp4684555p4684827.html Sent from the Samba - General mailing list archive at Nabble.com.

Thanks all for helping with this and for script Still no luck though. I've modified scripts as they had some bugs, my output and modified version at the end. As I mentioned, I don't have any issues with joining samba 4.1 or 4.2 in the lab, only on that site. >> if so, try the following. >> in resolv.conf, add >> search mynat.myco.bcu myco.bcu I haven't tried

On 08/06/15 13:08, L.P.H. van Belle wrote: > Hai, > > After reading all below i can only conclude this must be firewalling, as Rowland is saying also. > > check if all of these ports are acceccable for the server your trying to join. > > tcp 0 0 192.168.X.1:1024 0.0.0.0:* LISTEN 2146/samba > tcp 0 0 192.168.X.1:135 0.0.0.0:*

Thanks Rowland. I understand smb.conf is bit messy and can affect performance but it should not prevent me from joining domain. Here you go: [global] workgroup = MYNAT realm = MYNAT.MYCO.BCU server string = My server %h security = ADS password server = dc1001.mynat.myco.bcu map to guest = Bad User obey pam restrictions = Yes pam

I reproduced error WERR_DEFAULT_JOIN_REQUIRED in two scenarios: - user account that is used to join machine to domain is not part of Domain Admin group. - OU path for computer (specified in createcomputer) is invalid In both of those cases I'm getting detailed error messages: 'insufficient access' and 'invalid path' respectively but on customer site I'm always getting:

I've been trying to get a Win 2000 RAS server working with my asterisk PBX for quite some time, to no avail. I've googled, I've tried loads of configurations, I've rewired phone lines, and still I am not winning the battle. Here's my config. PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. I have 4 Zap channels signalled FXO_KS to the 750

I've made all changes to 3 files you mentioned, also removed everything except localhost in hosts file. SO I have minimal smb.conf and minimal krb5 file Unfortunately error is still the same. If I try to join with full OU path I get kerberos_kinit_password testuser at MYNAT.MYCO.BCU failed: Cannot contact any KDC for requested realm libnet_Join: libnet_JoinCtx: struct libnet_JoinCtx

Hello, I would like to know if the ARM architecture is well supported. At Xen.org it is mentionned in available architectures, but does it work really well ? I''m looking at CPU like "Tile64" from Tilera : http://www.tilera.com/products/processors/TILE64 The wiki http://wiki.xensource.com/xenwiki/XenARM doesn''t seem to be up to date. Is it ? Any advice ? Thanks,