similar to: Startup problem

Can anybody recommend an ISDN2e card that is a reasonable price. Also, does anybody know if the AVM B1 V4 card has the echo problems, I believe I saw somebody mention they had echo problems on the V3 card. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030507/c7cc9e15/attachment.htm

hello, please where i can get channel modem dsp patch - for correct use with i4l and patch to solve problem when the calling party can hear voices from last call, for a little moment regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/

Hi all, i tried to write a call generator script. It generate i file like sample.call in ast src tree. But when i set the callerid and make a call over Modem[i4l] then the caller id is not set for the outgoing call. Is it impossible to set the callerid at this time for ttI devices? Thanks for help, Thomas. ******************************************* beroNet technologies GmbH Dipl.- Ing.

Hello, i have asterisk with 2 internal isdn cards - handled by isdn4linux and i need to setup whol system like this route some call beggins with 0 or 00 - long distance through first card, route calls to mobile network via second card ( tehere is isdn gsm gateway connected).how i can do this using only isdn4linux (/dev/ttyi) ? regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza

I used to get bad echo and also voice breaking up during a conversation, so I upgraded the machine (from a PII 300 to a Athlon 1.8GHz) and have resolved the voice breaking up issues but still seem to have a fairly bad echo on *both* sides of the conversation. Currently I am only using the system for outbound calls, so I am always calling from the digium USB port phone and out to the telco using a

To whom it might concern, The Gesko Ikarus 1200S analog telephone has advanced callerid capabilities. When used with an ATA186, it show the username and the phonenumber of the caller. (or whatever you let * tell it) http://www.gesko.be/idgg004.htm Price is 77 euro something and available with Telec. (NL) Met vriendelijke groet, Pauline Middelink -- GPG Key fingerprint = 2D5B 87A7

Hello, I have that problem with codec G729. Please can somebody help me! WARNING[16384]: File codec_g729b.c, Line 413 (load_module): Unable to initialize va stuff: -1 == Detected 4 licensed G.729 transcoders WARNING[16384]: File translate.c, Line 219 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator 'g729tolinb' from format G729A to

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, After upgrading the kernel on an Asterisk box, asterisk segfaults on startup. It seems like it's the g729 codec that causes this: #0 0x4015acad in memset () from /lib/libc.so.6 #1 0x4022686a in load_module () at codec_g729b.c:416 #2 0x08054794 in ast_load_resource (resource_name=0x80d1068 "codec_g729b.so") at loader.c:298 #3

I want use iLBC and have following in mind, please help me is it possible ? ISDN <-----(ALAW)-----> * <-----(ALAW)-----> SNOM SIP??<-----(iLBC)----->?*?<-----(ALAW)----->?SNOM 1. ISDN incoming codec is ALAW SNOM codec should be ALAW (can't be iLBC because a lack of codec). 2. SIP incoming codec should be iLBC (snom is ALAW). 3. SIP outgoing codec should be iLBC /snom

Dear R experts, Sorry, I am resending this, since I have not received this mail myself for the past 5 hours. I saw a similar question dated July 2. But there is no answer to it. Does anybody have a solution to it? I am using window NT, and the R version is 1.5.1, the SJava package is the binary version SJavaWin_0.62-8.zip. Here are the error message: > library(SJava) > .JavaInit()

Hello, I'm having trouble working out how to send DTMF tones to an external IVR. My system has an analog phone connected to a TDM400P card, a SIP software phone (Zultys LIPZ4) and is connected to a BRI in Australia with a NETjet-S card. I'm using ISDN4Linux and a 2.4.25 kernel patched with the ISDN audio patch from Traverse (which allows the card to do voice). DTMF works fine between

Folks, Having problems getting started with SJava and request help. I get this error when running .JavaInit() (within RGui 1.5.1, on Windows 2000): Error in .JavaInit() : Couldn't start Java Virtual Machine: Cannot find the Omegahat interface manager class. Check you classpath! (Before you right back saying read the emails, please read further - in short, been there, done that)

I am having some problems with g729 with SIP and ZAP channels. 1) I have two g729 licences. Very frequetnly (I don?t know what triggers the error) I get the following warnings and error when I try to place a call via SIP to my X100P. The only way to get out of this is through a restart of *. When the error ocurrs there are no other calls in place. Any ideas? Error Opening channel:2 not

Dear R-experts, I have a data file df as the following: genename variable at 1hr variable at 4 hr variable at 10 hr gene1 gene2 . . . gene5000 I would like to have a graph with X-axis as the time point (1hr, 4hr, 10hr), and Y-axis as the value of the variable. So, basically, I want to do a line with the three different values at 1hr , 4hr and 10hr for all the 5000 genes. My purpose is

Dear R experts, I posted a question last week regarding RSJava error UnsatisfiedLink: eval. But, I did not get any response yet. So, I am trying to work something out. I tried to write something with perl, but it still does not work. In perl, when I used rename which is a Dos command, it worked through the cgi, so did cp (which is not a Dos command, but, it is in my path). And the perl

I have Now a G729 codec license and when i start it comes: [format_g729.so] => (Raw G729 data) == Registered file format g729, extension(s) g729 [app_datetime.so] => (Date and Time) == Registered application 'DateTime' [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) sh: line 1: tmp: Is a directory rm: cannot remove `tmp': Is a directory

Hello list, scrambling different pieces of info together I've come with the following : I want to have my "register =>" statements in a MySQL-database, so I've made the following table. table ast_config : id 1 cat_metric 0 var_metric 0 commented 0 filename sip.conf category general var_name register var_val username:password at sip.provider.net In ext_config

Hey all, Does anyone know what this means? I was running asterisk fine. Installed it on a new pc and I am using the g729b. codec that is optional. I ran the install for the codec it went ok but when I run askterisk via asterisk -vvvgc it gives me this error anyone know? I make sure I entered in the correct reg number. I followed the steps correctly. Too Registration error! Please try

Hi: I had asterisk with RealTime database working perfectly in a RH 9.0 machine. I used the sip cache so I even had MWI working. The problem is that I decided to move to Fedora Core 3. I installed the lastets cvs version of asterisk and the RealTime addon from asterisk-addons. I at first had the problems with the kernel and the zaptel driver but all that was solved with the

The gregmisc package contains a function 'perumutations' which generates all permutations of n choose r. It also contains 'combinations' which generates all combinations, and which appears to match your example: > library(gregmisc) Loading required package: MASS Attaching package `gregmisc': The following object(s) are masked from package:base :