similar to: Newbie: Getting demo to work via ATA-186

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set

toy buy my first cisco 186 but when i read this page http://www.djernes.org/~shawn/ata186.htm i cant find in my dev page some parameters just like " UseSIP " what i need to do to show this parameters Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030626/42e66005/attachment.htm

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

I have a problem with SATA disk. Once, i start up my system (1 domain0 and 2 domainU on the same machine), it is good. But, where some of them have high traffic and thus require high disk usage i get this error in dom0''s dmesg: ATA: abnormal status 0xD0 on port 0x9F7 ATA: abnormal status 0xD0 on port 0x9F7 ATA: abnormal status 0xD0 on port 0x9F7 ata1: command 0x35 timeout, stat 0xd0

> ata1: port is slow to respond, this delay is known to occur on vacant SATA ports > ata1: port failed to respond (30 secs) > ata1: SRST failed (status 0xFF) > ata1: SRST failed (err_mask=0x100) > ata1: softreset failed, retrying in 5 secs > ata1: SRST failed (status 0xFF) > ata1: SRST failed (err_mask=0x100) > ata1: softreset failed, retrying in 5 secs > ata1: SRST

I'm trying to install 4.8 from cdrom. I get to the kernel config menu, select the first option, install without configuring a kernel, and the boot process hangs accessing the cdrom. ad0 (the hard drive) is recognized fine. The cdrom does: acd0: MODE_SENSE_BIG command timeout - resetting ata1: resetting devices .. done over and over. Finally I get to the screen "Probing devices, please

Hello everyone, I''m hoping to find an answer to my problem here. Currently I''m installing xen 2.0.7 on 30 dual opteron machines with 4GB memory. The machines have Tyan K8SR as motherboard with Silicon Image 3114 chip sata controler and 2 x 300 GB Western Digital SATA drives. Each xen server has 5 domUs, where some of them have high traffic and thus require high disk usage.

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

Hi I have a brand new ATA186 with the following firmware: Version: v2.15.ms ata186 (Build 020919a) I have been through the archives about how to configure it, but my colorful configuration web page does not have the same fields that people say I need to adjust. Even the examples on Cisco's web site don;t match. For example, I don't have the GtkOrProxy field, which is an important

I am sure this is really simple. I have a setup of 2 disks (sda, sdb) which are outwardly identical, and are mirrors of each other. Together they form 3 raid1 devices. Both disks can boot. Now sda has bad sectors, and I should replace it. But which one of the physical disks is sda?? The machine boots fine from either one of the disks, (and the booting disk of course is always called sda).

Hello freebsd-stable, I've got FreeBSD 4.8R and CD-RW Asus CRW-4824a (master, ata1) but when boot process: acd0: MODE_SENSE_BIG command timeout - resetting ata1: resetting .. done It repeats 15 times, then all ok boot But I can't use acd0 Alexander Potapenko -- Best regards, Amber mailto:amber@arziz.uptel.net

Hi, I have a Asterisk with two Cisco ATA connected with each other . Cisco ATA1 is connected via satellite link Cisco ATA2 is connected via leased line The problem is CISCO ATA2 can call CISCO ATA2 with no problem But CISCO ATA1 cannot call CISCO ATA2 . Any suggestion please Rabii -------------- next part -------------- An HTML attachment was

I dont have a cisco acount yet can some bady hel me with the ata18x-v2-16-030401a-1.zip file. thanks in advance Rodney Acosta Coya. Dpto. Tecnologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

Hello, I'm building a new system for a friend and I bought a Pioneer DVD-120s drive for him because it was a newer version of the drive I use (DVD-116) and my friend uses (DVD-106s) with FreeBSD. The problem is that FreeBSD cannot probe the drive for some reason. I've tried twiddling the ATAPI_DMA bit, rescanned the drive, and toyed with the cable, but nothing seems to work. The

I''m trying to install OpenSuSE 10.3 as a domU on a CentOS 5.6 system running xen 3.0.3. It starts to load and then hangs: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) ata0 slave: Unknown device ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom ata1 slave: Unknown device Booting from CD-Rom... ISOLINUX 3.31 0x46f43c1e Copyright (C) 1994-2005 H. Peter Anvin Loading... In

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

Summary: Changeset 10173 - 64bit UP and SMP guests boot cleanly - 32bit UP guests boot clean and 32bit SMP guests still fail to boot (see failure.7) - 32bit UP guests lockup under load with "ata1: command 0x25 timeout" (see failure.4) - 64bit SMP 2 CPU guests lockup under load with "ata1: command 0x25 timeout" (see failure.2) - 32bit UP guest crashed on user load test

One of my CentOS boxes has started giving me errors. The box is CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a software raid 1 configuration. The errors I see are: ata1: command 0xca timeout, stat 0x50 host_stat 0x24 ata1: status=0x50 { DriveReady SeekComplete } Info fld=0x1e22b8, Current sda: sense key No Sense ata2: command 0xca timeout, stat 0x50