similar to: Using ICH for outbound when * is behind NAT

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Hi All, Outbound Iconnecthere calls work without any problem but Inbound calls are very intermittent. It seemed to work for a week or so but over the past week 99% of inbound calls are dropped to ICH voicemail. Would moving the Asterisk box to a public IP resolve the problem or is it just an ICH/Asterisk problem? I am registering against natrelay.deltathree.com. asterisk -vvvc shows an

Hi, I was able to connect asterisk to iconnect's service. It took me almost two hours, but it's because I was having NAT trouble. I finally discovered that you can set the iconnect host to natrealy.deltathree.com to make it work. (for those of you who, like me, don't have the time to search the archive I'll provide a working sample in a minute) My problem was sound

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hello all, I have a 7960 registered to asterisk. I am trying to use iconnect as my sip provider. When I send an invite to delta-three, I get the normal INVITE - 407 - INVITE exchange. The problem is, asterisk is sending the second invite using the 'dialed number' from the 7960 as the username, and not my 'username' configured in sip.conf. I believe that digest authentication

Is there a good crib sheet showing the features currently supported in the SIP channel where the channel is being used to access a SIP provider such as ICH? I basically want to set the * SIP client so that it registers with ICH for incoming calls. The * system is behind double NAT. An ATA 186 works fine (apart from the normal ICH blitches.) using both the gateway/proxy and outgoing proxy

Hi friends, I've noticed that first register message sent by * always get rejected by the destination sip server. Then * sends a second registration message ( with Autherization section, and that get accepted by the destination host). Why is this ? Isnt there a way to tell * to send with Autothorization message the first attempt ? Asterisk sends this first 9 headers, 0 lines 11 headers,

Hi All, I can only seem to get iconnecthere working with incoming calls intermittently. One minute it seems to work, and the next it doesn't. I am not aware of anything being changed in the config files. Outgoing calls work ok all the time. The Asterisk box is behind NAT so that does complicate things slightly. However, the Iconnecthere PCPhone client software works perfectly for

Just wondering whether we have a resolution to iconnect incoming problem, which started few days ago. Cheers SW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040808/ecc99c4a/attachment.htm

This morning, I received a very strange error message on the Asterisk console. The error occurs when I try to access iconnect WARNING[196621]: File chan_sip.c, Line 386 (__sip_xmit): sip_xmit of 0x80d0854 (len 649) to 213.137.73.178 returned -1: Bad file descriptor I also get this error when I try to reload: WARNING[16384]: File chan_sip.c, Line 5355 (reload_config): Unable to get IP address for

I am going to have to find a fix for this problem or I'm going to have to quit using iconnect. About one call in 10 or so, iconnect's gateway gives me an error (console output appended below). So upon receiving the error, which as a 4XX error means, "Fatal," asterisk gives up and drops the call. But not iconnect!! The phone at the other end starts ringing, and rings

Hi, i have diffirent provider example(3 single account in deltathree, 4 account in packet8 and so on) . How this possible to make the three individual sip account in deltathree act as trunk so that i cannot get a busy call. If line one fail goto line 2 then line 3 or another trunk line 1 then line 2 then line3....I read it in asterisk at home but the script i am copying is not working .

I am trying to get my connection to IConnecthere.com working. I didn't have a register command in sip.conf at first, so I believe that is why it was not working. However, I can't seem to get the register command correct, it just keeps timing out. Below is what I have: register=<username>:<password>@natrelay.deltathree.com I know that there is supposed to be

I can't talk through iConnectHere. The connection gets made but as soon as any sound is transmitted the call ends and the Asterisk console shows an "Unsupported Media" error as follow: Got SIP response 415 "Unsupported Media" back from 213.137.73.147 My only allowed codecs are alaw and ulaw. My sip.conf looks like: [iconnect] type=friend secret=xxxx username=yyyyyyy

I have an asterisk Redhat 9 box running 4 hardphone extensions. Inter-extension calls are crystal clear. However when I dial out through my iconnect account I get a lot of jitter. At first I thought it was my nat gateway but after I programmed on of the hardphones (budge tone 100) for direct dial to iconnect I have clear voice transmission. I have no way of explaining this. My asterisk sip.conf

Hi folks, I want to fix hole in my asterisk set up. I use Vocal as my sip proxy and * for voice mail and the g/w to PSTN, Iconnect, fwd etc. So from Vocal I redirect sip requests which needs to go 'other' places. This senario works fine. Now the issue is someone else running a vocal or another SIP proxy can redirect his calls to my * as well. Those calls two will come through general