similar to: Reduce echo?

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following: <*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*]

Hi all, I'm experimenting with Asterisk on linux using an Eicon Diva 2.01 S/T PCI card. I'd set up the card using the hisax driver and isdn4linux (titled as "Old ISDN4Linux (obsolete)" in the 2.6.12 kernel. I can make SIP calls and outgoing phone calls as well, but gathered a few problems on my way: 1. Plain SIP calls using softphones on windows clients work fine not counting

In this message I try to summarize what I have learned in these last two weeks. My primary sources of informations were the * list archives and linux ISDN docs. I ain't no * master, so don't trust too hard. Relevant messages from the * list for the current discussion are: 009177.html 009268.html 0498.html 0849.html My setup is an Eicon Diva (HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2)

If I want to send outgoing DTMF over a BRI interface, can I do it with 'isdn4linux' or must I use the 'capi' library? -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part -------------- A non-text attachment was

Sorry for a slightly off-topic question, but I'm getting desperate. I tried to use asterisk to talk w/ ISDN line and tracked the problem to i4l. I have a Diva PCI 2.02 (S/T) card and am running RH8 w/ 2.4.20 kernel (first version that supports the 2.02 w/ hisax driver). The switch is a 5ESS running NI-1 protocol. The card sync's up and reports other traffic on the line, but fails to

----- Original Message ----- From: Karl Heyes <karl@pts.tele2.co.uk> To: <icecast@xiph.org> Sent: Friday, January 31, 2003 5:29 PM Subject: Re: [icecast] Re: Compiling ices <p>> On Fri, 2003-01-31 at 06:39, Marc Remijn wrote: > ... > > > Kernel output: > > > > invalid operand: 0000 > > CPU: 0 > > EIP: 0010:[<d08e25b1>]

Hello everyone. I need a BRI ISDN card that works in Romania. I already have one of the "Cologne HFC-S" PCI cards and it doesn't work right, it's junk. I get waaaay too much echo using it. I'm now "shopping" for a better card. Can anyone recommend me a card that "fits" the following: (a) Costs less then $1000 / 750 euro (b) Has one or (preferably) two

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

I just wanted to let you know that it's possible to use Eicon DIVA PCI 2.01 ISDN cards (not "server" divas) with asterisk. First thing to do is to load the module. If you have two of these cards, you should do it like that: modprobe -v hisax protocol=2,2 type=11,11 And now you can have up to 4 incoming calls with two cards (try calling yourself and see if anything gets into

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hello All, I was just after a few pointers. I have just setup my Redhat 9 linux box with asterisk. Internal SIP call working fine. My Eicon ISDN card turned up today so - plugged it in and went through the modem.conf. It reports unable to open /dev/ttyI0 The problem is I have never used ISDN with Linux - let alone a telephony app - and I have no idea even where to start. Some pointers

I finally got my ASUSCOM (Cologne chip) ISDNLink card working here in the US. When a call arrives, I get "Unknown IE 42 (Unknown Information Element)" and "Unknown IE 21 (Unknown Information Element)". IE 21 (0x15) is defined as Q931_CALL_STATE_SUSPEND_REQUEST. IE 42 (0x2a) is not defined in the code and I couldn't google it. Is this something perculiar with ISDN in

hi, i just found a page on the net which might me worth some lines. for the urgent reader: http://isdn.jolly.de there is a guy in germany who has successfully programmed a gpl-patch for isdn4linux to make isdn cards with the hfc chipset from cologne chip (http://www.colognechip.com) run in the NT mode (up to 2.4.20). this mode is needed to connect isdn device to a pc and enables the use of

Hello Folks, I looking to migrate a pbx from one server to another. The original server has this ISDN card: ? 00:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) ? The new server: 00:00.0 I2O: Digital Equipment Corporation StrongARM DC21285 (rev 04) << AVM ISDN Controller C4 Now I'm not fully aware of both's cards functions since the manuals

hi, we are currently planning are large site which will migrate from an old siemens hicom pbx to asterisk. the customer is currently using a paging system (small receivers which display a callback number and a base station (transmitter) with several antennas at the site) the problem is, that the currently operative base station uses 4 ISDN BRI interfaces. But the protocol is old germany 1TR6