similar to: H323/GnuGK/Netmeeting

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am working on a H.323 project which involves GnuGk and Asterisk My current goal is to provide IVR functionality for the H.323 users which register through GnuGk(eg. call credit information) I have successfully built a H.323 platform using GnuGk - it uses SQL accounting and authorisation. Now I am trying to integrate it with Asterisk in order to provide IVR functionality as I already

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

I've been banging my head on this one for a few days and am quite stuck. I've got a gatekeeper running and everything works there. Netmeeting works calling other netmeeting clients. Netmeeting calling asterisk connects, but netmeeting can't generate the signals to make the demo do anything other than talk. But connection from ohphone always disconnects straight away. I can't seem

Current setup: Polycom IP3000 <-> gnugk <-> asterisk <-> Cisco 7940 Asterisk and gnugk are on 10.20.98.6 IP3000 is H.323, using G.711 (10.20.98.2) 7940 is SIP, using g711ulaw (10.20.98.3) I've been asterisk for a while now, only using SIP devices. I'm happy with that side of things, but I've not used H.323 before this week, in trying to get the IP3000 to work. *

has anyone managed to get these three beasties to work together ? we're using ooh323 from asterisk-addons-1.2.2, asterisk 1.2.6 and microsoft netmeeting default from windows xp. the symptoms are that calls from a SIP client to NetMeeting rings on NetMeeting, but upon answering the call in NetMeeting, no audio is passed between the two. eventually, the call times out and hangs up. on a

Hi! I am in a H.323 network with a gatekeeper and some terminals. Asterisk is a gateway between this network and the SIP network. Now I can do calls from de foreign network (SIP) to the locla (H.323) but I don't know how to do the inverse. The H.323 terminals use NetMeeting, and when I try to make a call, it says that the number dialed must be registered in the gatekeeper. How can I register

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Hello, I need to install a h323 channel in order to asterisk act as a sip/h323 translator . I want to use gnugk in full proxy mode for the h323 terminals nated . Which h323 channel for asterisk and gnugk h323 oh323 or ooh323c ? Harry ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver

Hello, I am trying to configure asterisk with GnuGK. Is it possible to configure Asterisk OH323, CHAN_H323 without register to GnuGK gatekeeper? thanks, Ganbold -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060118/5f99c433/attachment.htm

I've got problem with connections h323 -> sip and sip -> h323. I've Cisco 7940 phone with sip soft and Netmeeting as h323 node. As gatekeeper I've gnugk and brand new asterisk from cvs + chan_oh323 0.5.5 When I call from Cisco (SIP) to h323 node by alias registered on gatekeeper and h323 node will answer the phone... I have on my Cisco still Ringing. Call termination, no

Hi all, I have seen many posts on the Shorewalllists dealing with H323. Although lots of them indicated that this is difficult process with kernelrecompilation etc. I just tried what seemed to be logical for me. Surprisingly it worked. Configuration: WS1 ----- FW ------ Internet ------- WS2/Shorewall WS1, FW and WS2 run Redhat9 with its standardkernel 2.4.20. FW and WS2 run Shorewall

Hi, Has anyone ever succedded in shaping H323 traffic ? I mean reserve a certain bandwidth for it, in order to have a comfortable Netmeeting, and not be disturbed by downloads & others. I tried with HTB but it doesn''t seem perfect... Thanks for replies, Sam Vous manquez d’espace pour stocker vos mails ? Yahoo! Mail vous offre GRATUITEMENT 100 Mo ! Créez votre Yahoo! Mail

Hello everybody, I wonder if anyone can help me in something I am trying to do but have no clue on how to do it: I have an Asterisk installation and I would like to be able to assign certain extensions to people with NetMeetings that take dynamic IP address. Does any one know how I can get the IP of an incoming channel in order to be able to dial back to that channel after the call is hangup?

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec