similar to: ISDN - Dialout MSN setting ??

Hello! How can one select outgoing MSN when dialing out from ttyI-interfaces? I have successfully done this with CAPI e.g... exten => _XXXXX.,2,Dial,CAPI/60:bBYEXTENSION ...in extensions.conf. Currently correponding for my ISDN modem interface is... exten => _XXXXX.,2,Dial(Modem/g1:${EXTEN}) ...but this selects only MSN of outgoing group g1 for dialout MSN number. I also tried to

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

Hello my name is Ilija Poznic and I have a problem. My configuration is 1. Digium TDM4000P with one FXS. 2. AVM Fritz ISDN adapter (configured with capi). When I connect to my ISP and then start *. Asterisks is registering me to SIP provider iconnect. After that I can call international call trough VoIP. My problem is that I want to dialout to ISP only when I have a international call.

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

Hi, I've been trying to use the set_callerid function in the AGI. It sets the CallerIDname properly but I can't figure out how to set the CallerIDnumber. Is it at at possible ? Cheers. SL

First off, I also posted this on the digium forums so if anyone here also reads those, sorry for the cross-post. When I place an outbound call using SIP to my cell phone, asterisk immediately starts processing the dialplan without waiting for the call to be answered. We could handle this on DAHDI using callprogress, but I don't know of a similar setting for SIP. Here is the contents of

I have an interesting problem. I am attempting to install a payphone utilizing a Cisco ATA-188. The payphone actually works, but there are some timing issues. What happens is you pick up the payphone and the ATA grabs a line and goes offhook. While you monkey with putting money in and dialing the number, you are eating up the time before you get the offhook reorder tones (or howler tones

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

I am originating a call to a Local channel using an Originate Action: Action: Originate Channel: Local/dial at outdial Context: outdial Exten: answer Priority: 1 Timeout: 45000 ActionID: some_id In my dialplan, I have this: [outdial] exten => dial,1,Dial(${DIAL_STRING}, ${DIAL_TIMEOUT}) exten => dial,n,NoOp(Dial Status = ${DIALSTATUS}) exten =>

Hello, I have installed the latest version 12 that has been released (12.1.0.rc3). I have setup default dtmf mode (rfc47..) but when I am calling to a endpoint that doesn't support it (no telephony event in the rtpmap) the asterisk responds OK in the signalling but DTMF is not working. Is it a known issue? Below you can see the output of the asterisk monitor. <--- Received SIP request

Hey eveyone! I hope someone can help wiht this question. I have a matirux of all zeros and ones and I would like to indentify all unique patterns in the rows andthe number of times the pattern occurs. I changed all zeros to NA tried to use prelim.norm to identify all patterns of missing data in the rows. I got the message Warning message: NAs introduced by coercion Any ideas of how

Hello, I am trying to use a HFC-PCI (CCD/Billion/Asuscom 2BD0) card in TE mode to dial-in and out with ISDN. The problem is I can not get the card to dial out with a Zap channel. Dial-in is working. I am using bri-stuff 0.1.0-RC4 (but tried also RC3 and RC2k). I tried all combination of "immediate", "overlapdial", "pridialplan". I earlier also managed to dial out

I was reading this page: http://api.rubyonrails.org/classes/Fixtures.html#M000326 and was trying to get hashed labels working. However, calling it from within a unit test results in this error: def test_defaults_to_disabled identify(''one'') end 2) Error: test_defaults_to_disabled(AdminTest): NoMethodError: undefined method `identify'' for

Hello, i wonder why i didn't find a solution for this problem yet, because it seems very common: I have an asterisk server with an AVM (Fritz) ISDN-Card (BRI), and some SIP-Softphones which i can call from outside by calling the phonenumber of the Asterisk-Server and then dialing the number of the SIP-Phone. If I make a call from a SIP-Phone into PSTN, only the MSN of the asterisk-server is

Hi, I was hoping to get some advice regarding the testing of interactions, when one factor is modelled as a random effect... I have a model with binomial error structure where the response variable is the proportion of time spent at the main sett (animals were tracked for 28 consecutive days in each season, and were recorded either at the main sett or an outlier sett, so the response variable is

Quickie: Does anyone out there have experience with PRI delivery of ANI II information? Specifically, I want to know if it's possible from within Asterisk to know if the inbound call (which may or may not be to an 800 number) came from a payphone or not. I know with some 800 providers it's possible to block inbound calls from payphones (due to the FCC surcharge etc) but was wondering how

Hi All, I'm trying to configure a Digium T100P to talk to a legacy voicemail system. I have the signaling specs verbatim from the original manufacturer documentation as follows: [T1 Signaling] Service Type: T1,D4 format, AMI(Super Fram) Signaling: Four wire, terminated, E&M (Robbed bit) Start Protocol: Wink start; 250msec duration Dial Tone: Enabled Digits: DTMF, 4-digits DTMF: 50msec

Hi all, Just thought I'd pass along some pointers when outdialing with Voicetronix's OpenLine4 card. I was having a tough time dialing out from *, it probably has something to do with chan_vpb.c not waiting to hear the dialtone before telling the card to dial. A quick fix was to insert a "," in the dialstring telling the card to pause before dialing. However when the

the caller is out his money anyway when you call any phone and voicemail kicks in, although i think on a payphone they give you a 2 or 3 second window to hang up. Suggest you implement i'm here / i'm away dialplan logic or set the do not disturb button that way when someone calls and the guy is away it hits voicemail right away and the caller can hear this and still have the 2 or 3

I've set up an outbound .call system for customer callbacks and the like. Calls are going out over analog lines and I'm trying to use the WaitForSilence routine to make sure the phone has stopped ringing before starting message playback. The problem is that if I set the first argument of WaitForSilence to anything other than 1, WaitForSilence never exits. Some general info on my setup: