similar to: Creating a phone channel

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

I want * to answer the phone when call comes-in. I've enabled /dev/phone0 in phone.conf and created /dev/phone0 with a command: mknod /dev/phone0 c 100 0 Though, when I start * I get: Parsing '/etc/asterisk/phone.conf': Found Sep 12 00:18:42 WARNING[16384]: chan_phone.c:950 mkif: Unable to open '/dev/phone0' Sep 12 00:18:42 ERROR[16384]: chan_phone.c:1141 load_module: Unable

I am having trouble with this. I can dial 1800 numbers fine as well as FWD service numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten =>

I have a Quicknet Linejack in /dev/phone0. My phone.conf is: [interfaces] mode=dialtone format=slinear echocancel=medium context=mayores device => /dev/phone0 Only I can mark 7 digits, soon asterisk tries dial automatically. I cannot mark 8 or more digits. 6 or less digits work ok. -------------- next part -------------- An HTML attachment was

My thanks for previous help on fixing IXJ issues in 1.2.40; I now have problems with a just-built 1.4.35 on the same host: [Aug 18 17:26:48] WARNING[27209]: app_dial.c:1298 dial_exec_full: Unable to create channel of type 'Phone' (cause 0 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) O/S: Linux 2.4.27; IXJ driver for Linux Rev. 3.5, gcc 3.01 I applied the patch for

Hi, I am trying to get a prototype working based on Asterisk and Quicknet cards. I currently have to systems set up each with a LineJack card. I have the systems working, but can't get the voicemail demo to work properly. Messages to the user telephone set from the voicemail system are clear, but recordings left through the phone are distorted. Sounds like the audio has lots of echo and

I cant seem to be able to figure this out. As much as I can tell it is a codec problem. I can dial out to 612@fwd.pulver.com and the "Call Me" test there rings my phone. However when the callee endpoint answers, there is a failure to translate: Outgoing Call for 612 612 is not a local user -- Called 612@fwdpulvercom No path to translate from SIP/fwdpulvercom-dd5a(2) to

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

So I have an X100P, and a TDM10B both working (at least I think they are). The drivers have been loaded and ztcfg -vv shows no errors in the configuration of two channels. When I run asterisk -vvvc and pick up my phone (plugged into TDM10B), I don't gear a dialtone. in phone.conf, I have [interfaces] mode=dialtone format=slinear ... Shouldn't that produce a dialtone when I pick up the

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

I am trying to run the make command to install Asterisk, but I get the following error: make ... ... checking for tgetent in -ltermcap ... no checking for tgetent in -ltinfo ... no checking for tgetent in -lcurses ... no checking for tgetent in -lncurses ... no configure: error: termcap support not found I am running Mandrake 9.1 on a Pentium II 200MHz. Could this be a hardware issue? I