similar to: iax problems

Hi, I created an iaxtel account, and was given a password containing an "@" character. The directory pages imply that they change the web login password only. How do I reset my IAX password so that it is usable in the iax.conf file? Thanks, Steve

Greetings, I have a somewhat unique (I think) configuration that I am testing involving MeetMe conferencing and have encountered a problem that I'm not quite sure how to solve. Here is a brief description of my setup for the background. I wanted to offer the ability for users to mute and unmute themselves while in a conference. If they enter a conference as monitor only, they are

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

Hi everyone, THis is my second thread regarding the issue.(before I was having problems with accessing my email, which slow down my responses, sorry for that) My setup looks like this Firewall | | Asterisk---Asterisk (two asterisk servers with the same setup for high avail) | | phones Ports 5060, 10000-20000, 4569, 5036 are forwared to 192.168.1.251 which is virtual ip address on one of the

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

To answer my own message, I figured out a solution (untested) about 10 minutes after posting and leaving the office. Doh! Anyway, the solution (now tested) was to make the Asterisk server behind the NAT register with its peers. Despite reserving port 4569 in the firewall, that was not enough in this particular NAT firewall - it was only being reserved for one connection. Kind regards, Sebastian

I've been having problems with incoming IAX2 calls - some work, but a large fraction are answered with "dead air" or disconnects from my IAX provider. Disabling the jitterbuffer seems to eliminate the problem (so far)! Has anyone else seen this? I'm using 1.2.6, but I'm not sure what my provider is using. A snippet of the a failed incoming call IAX2 debug is attached

Hallo Did you allow udp outgoing on 4569 as well.. i found udp bit different than tcp when comming to firewalls liaan ----- Original Message ----- From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws> To: <timebandit001@gmail.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 21, 2005 12:29

I had a working 1.0.9 asterisk installation and tried to get a Firefly IAX phone to register, but it was failing. I upgraded to asterisk 1.2.5 and the PBX is working fine, but the IAX phone still won't connect. Below is my iax.conf and the output from setting iax2 debug while the phone tries to connect. Could somebody please give me some pointers? This doesn't seem to be a normal

This may not strictly be an asterisk question, but not sure where else to post ... I have an Asterisk test server setup with two firefly clients, one on the local lan and one on an external ip address. Both clients are setup the same way and voice calls work fine. The asterisk console reports a "Registered" message for the external client at about one minute intervals but the

Hi all, I am trying to connect to a softphone application using an Iax channel on Asterisk 1.4.30. I can do outbound calls, from softphone to asterisk, but not inbound from asterisk to softphone. I get the following Debug: ---------------------------------------------------------------------- ---------------------------------------------------------------------- Tx-Frame Retry[000] -- OSeqno:

I know in advance maybe I'm overlooking something stupid, however I'm really lost and cannot find the solution... Situation: - asterisk-1.2.13 on a linux box with no iptables active. - one iax2 peer defined - one wildiax phone running on my laptop the soft phone is configured to connect & register on asterisk, however, I cannot get it working. What am I missing? Please help!!

Hello, i have a simple but annoying problem. I have the following entry in /etc/asterisk/externsions.conf file: ---<Cut Here>--- exten => 10100,1,Wait(4) exten => 10100,2,Playback(transfer,noanswer) exten => 10100,3,Dial(${PHONE30},30,t) exten => 10100,4,Background(extension) exten => 10100,5,Background(is-curntly-unavail) exten => 10100,6,Voicemail(9999) exten =>

Hi, I have two asterisk servers and I want to make these servers call each other as they were internal. I have succeeded in one way. Server B can call Server A without problem, but Server A cannot call Server B. Here's the iax configuration of servers Server A: ================== [ipek] auth=rsa context=from-internal host=XXX.XXX.XXX.XXX inkeys=ipek outkey=odtu peercontext=from-internal

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hi! Sometimes IAX peers are not reachable and with "iax2 set debug on" I get something like this Tx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG Timestamp: 00014ms SCall: 00001 DCall: 01200 79.233.155.174:49153 Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00014ms SCall: 01200 DCall: 00001 79.233.155.174:49153

iax2 debug is giving following messages repeatedly. Tx-Frame Retry[003] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 00010 DCall: 00000 [xxx.xxx.157.230:4569] USERNAME : XXX9072835 REFRESH : 60 Tx-Frame Retry[002] -- OSeqno: 002 ISeqno: 000 Type: IAX Subclass: PING Timestamp: 20001ms SCall: 00006 DCall: 00000

Hi, I have two asterisk servers one is connected to the PSTN and the other one is connected to SIP users. The two servers connect with each other using IAX. When I have an incoming call from PSTN to the asterisk servers and have a forward to go back out to the PSTN the two IAX channel bridge together. Now every time I dial a DTMF digit, the asterisk is sending two DTMF digits. I enable