similar to: Help with linejack as a trunk?

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi, I am trying to get a prototype working based on Asterisk and Quicknet cards. I currently have to systems set up each with a LineJack card. I have the systems working, but can't get the voicemail demo to work properly. Messages to the user telephone set from the voicemail system are clear, but recordings left through the phone are distorted. Sounds like the audio has lots of echo and

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

I have a Quicknet Linejack in /dev/phone0. My phone.conf is: [interfaces] mode=dialtone format=slinear echocancel=medium context=mayores device => /dev/phone0 Only I can mark 7 digits, soon asterisk tries dial automatically. I cannot mark 8 or more digits. 6 or less digits work ok. -------------- next part -------------- An HTML attachment was

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I found a message from you to the asterisk users mailing list from 2001. I was wondering if you got (or still have) an asterisk system working with the linejack? If so, would you be willing to assist me with mine? I seem to have things working, and * says that caller ID is coming in, but I can't get * to actually answer the call. Thanks, Greg -- NetIO.org

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi All, Does anyone know if there has been any developments in asterisk to use LineJacks to dial out (connect to the PSTN)? The card works perfectly with virtually anything else but asterisk. Maybe the CVS versions have some work on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com

It would be nice if Digium updated the hardware compatibility list on asteriskpbx.org to indicate that the LineJACK can't be used for dialing out. I've seen several people on IRC be burned by not knowing this. --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)

Hi, New to the list. Just wanted to know if someone managed to get LineJack to make outgoing calls to the PSTN line in Asterisk. Any dev on this? Cheers, -P -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup

Hi, I am successful in getting incoming calls for my linejack .... But, I am getting an error cannot create channel of type Phone.... Does linejack do outgoing calls in asterisk ? Thanks, PTA -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031011/79060c3b/attachment.htm

Hello All... I have searched in the archive and also followed Zara's instruction on getting incoming calls to work with Asterisk...but I still can't get Asterisk to answer incoming call on Linejack's LINE port. I attached a phone set to the PHONE port, and telco line to the LINE port on the Linejack(ISA) card. I have downloaded, compiled and installed the newest driver for

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

Hi there, I?ve been out for some months now, haven?t been checking the list at all. Does anyone know if the problem with the Quicknet Linejack (FXO) card dial out to PSTN with asterisk was solved? Is anybody working on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup

Dear all I read on the list back in 2003 that * does not support IXJ LineJACK dialout yet is this still the case? Thanks

Hi, I have been experimenting with Asterisk and the linejack card and have discovered the follow: 1) The linejack in FXS mode works well with asterisk as long as the format in the phone.conf is set to ulaw. With mode set to slinear, gsm recorded messages played by voicemail appear to be slightly choppy (sounds like a click at the end of each frame). 2) Using the configuration above, the

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

My thoughts on this after reading Steven's very politically worded reply is that IMO your best bet would be to go with RedHat, I am not going to go into details about the if's, when's, why's, and but's.. I am running Asterisk quite well on RedHat 9 and if you like I have created an install guide for setting up an Asterisk box on RedHat 9 which I can send to you if you are