similar to: Slight Echo problems

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

I've been having some problems getting a channelized T1 working with a T100P card. Perhaps someone can help: I have an Eschelon T1 coming into a Vina Integrator box. This box splits out the T1 into an ethernet plug for bandwidth and a secondary T1 which I plug into the T100P card. I've connected the two with a T1 crossover cable. I get a green light on the t100p card and can make

I would like to add the ability for our users to be able to press "0" whenever reaching someone's voicemail box to re-reroute them to the auto-attendant. Here's a sample extensions.conf: [incoming] include => ciscophones exten => s,1,Wait,1 exten => s,2,Answer exten => s,3,DigitTimeout,5 exten => s,4,ResponseTimeout,15 exten => s,5,BackGround(auto-greeting)

Hello, I have been researching Echo Can's for a while now, and wanted to post this out to the list to solicit feedback (and if my assumptions are correct, hopefully help others out)... If anyone out there knows anything about wiring up an Echo Can, and my outline below is incorrect, please let the me/list know.. I have posted the Documents I received from Tellabs at:

Hi, I am interested in the thoughts of the people who know the architecture of Asterisk quite well.. What I am interested in is the performace difference of Celeron vs P4 vs Xeon.. I know Intel marketing says that servers should be Xeon, Workstations should be P4 and desktops should be Celeron and they are priced to the specific target market.. I am on a tight budget and so I am looking for the

Howdy all... When making SIP calls through my X100P from X-Lite to the PSTN I'm getting 3-5 second dropouts in both directions. I've tried ulaw and GSM, but that doesn't seem to make a difference, and the * box is on my local net. Here's my hardware: Celeron 2.4GHz, 512MB, Slackware 9.1, 2 X100P, 1 T100P. Any ideas what could be happening, or pointers as to how to shoot this

Hi guys, I've run into a problem that I can't figure out on a bunch of handsets I have running into a Rhino Equipment 24-port FXS channel bank hooked up to a T100P and running asterisk-0.9.0 and the associated stable Zaptel release. The sidetone (your own voice that you hear in your handset, built in for comfort) is noticeably louder than it should be, and it doesn't seem to

I'm experience echo on outgoing calls: Snom 200 ----> Asterisk ----> T100P ----> PRI ----> called party I am getting echo on the Snom 200 phone. The called party does not hear the echo. Since the PRI is digital, I don't really understand where the echo is coming from. I turned on echotraining, echocancellation=yes (128), and echowhenbridged in zapata.conf, to no avail.

Hi, Jean, thanks for your source code example. I like ask info about cpu consuption, in our example enabling echo removing cause the sound poppling with a celeron 1.7Ghz (taskman show cpu full, without echo is at 30%). Does exist a mode to lower the cpu consuption in echo removing? Because a large part of users base own still "old" CPU of 6-7 generation, as from 500-700 Mhz and lower

Hi all, I am experiencing a problem with the quality of the voice communication between an IAX based softphone (WinIAX) and an outside line through a FXO port or even with a regular analog phone connected to a FXS port. The party using the IAX softphone hears his own echo a plit of a second after speaking. The party on the analog end does not experience any echo. I tried to modify the KFLAG

It seems consistant after dialing dozens of times that the call that doesn't go through is the one the gets the log message "No echocancellation requested" (chan_zap.c) and the "Scheduleing timer" (channel.c) in the middle of receiving the DTMF tones. I'm now using the T400P card last week very simular problems the the T100P (although I think I was actually loosing

HI, I am trying to find out why an old slower machineis faster than a new faster machine. I have a RedHat 6.2 server installation, it runs samba and I have been very happy with it. Filesystem is:- [darryl@keg darryl]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/hda6 1.2G 735M 387M 66% / /dev/hda1 40M 3.0M 35M 8% /boot /dev/hdc1

Hi experts, I encounter a serious problem using Roaming Profiles unter XP Prof. I don't know if this is realy a Samba issue, mybe someone has already solved the same problem. I am running Samba 2.2.5 as an PDC using LDAP. The first time I log on with user "tom", all looks perfect and a profile is downloaded from the Samba PDC, say into D:\Documents and Settings\tom. Then I log out

Hi all, I have a problem with echo and silence in the middle of calls. the echo problem is that in the first 5 to 10 seconds of a call there is echo on the sip side but not on the PSTN side, also the echo will randomly come back in the call sometimes, I'd say 3 out of 10 calls. the other problem I have is that sometimes ( like maybe 4 times a day ) we will be talking to PSTN calls and one

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Hi, I'm in big trouble I've got two serwers with Asterisk 1.03 both serwer with 2 ISDN cards. When I call isdn server card and then choose other msn (disa) I can make connection with other phone (I've got standard ISDN PBX). But echos are horrible. My configuration: Athlon 2.0 256 RAM 2 HFC cards i4linux. mandrake 10.1 kernel 2.8.1 and second server Celeron 2.6 256 Ram 2

I'm having issues with echo. My setup is Polycom IP501 phones connected to an Adit 600 via T100P. 13 Lines going to the Adit. All echo so far is on the local side (Employees hears own voice, but only on some calls). Watching the channel with ztmonitor, I notice that TXGAIN is pegged out most of the time. RXGAIN is anywhere between 45 and 60%. Is it safe to assume that playing around

On 29/03/2020 14:31, Patrick DERWAEL wrote: > Hi Phil > > Here it is: > > > [root at totorbex ~]# lspci -nn > .00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium > Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] > (rev 21) > 00:02.0 VGA compatible controller [0300]: Intel Corporation > Atom/Celeron/Pentium Processor

Hi Phil Here it is: [root at totorbex ~]# lspci -nn .00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21) 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) 00:10.0 SD Host controller