similar to: error in tor2

I'm sure this is a simple problem to fix. Does anyone know what might cause these errors? [eric@vulcan zaptel]$ make gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/linux/drivers/net/wan -I /usr/src/linux/include -I/usr/src/linux/include/net -DMODVERSIONS -include

Hi! I currently have the X100P and TDM400P Asterisk cards. For obtaining Asterisk PBX: I have no direct connection to internet, so I use ftp and download the neweast packages: zaptel-0.7.0, libpri-0.4.0, asterisk-0.5.0. The environment I compiled the tool: PC (HP): Intel PIII 500 MHz OS: Red Hat Linux 8.0 (Upgrade from Red Hat Linux 7.1). When I compile the first package (zaptel-0.7.0), I

# make clean ; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits gcc -I/usr/src/linux-2.4/include

Hi All, At the suggestion of Tilghman I'm trying to compile the zaptel dummy driver to see if it fixes the stuttering mp3 problem. I checked out zaptel from CVS but when I try to do a 'make' I get the following output, which terminates with an error. (I'm using RedHat 9) Can anyone suggest why it fails to compile? cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA

I have a server with an asterisk ss7 link connected to a Siemens working well for over a year. A few days ago I started having problems with signaling. I found the following logs in / var / log / messages Sep 12 11:49:25 call3 kernel: [1018427.030959] dahdi: Master changed to TE2/0/2 Sep 12 11:49:25 call3 kernel: [1018427.120740] dahdi: Master changed to TE2/0/1 Sep 12 11:49:26 call3 kernel:

Hi Users, I have a problem with some of my mp3 files. they crash the system (Asterisk 1.6.2.14 on a x86_64 running Fedora 13 ) when it tries to play them. Unfortunately the logs do not give me a clear fault or cause of crash but i can clearly see that ts because of the MP3 files. Its the way some files are encoded. Is there a way I can make it skip the files that can be played? I use the

Just wondering if there is a reason PPP support is compiled into zapata by *default*: # Uncomment for Generic PPP support (i.e. ZapRAS) # KFLAGS+=-DCONFIG_ZAPATA_PPP Especially since the comments imply that it should be commented out by default... The main reason I ask is because I usually try to re-compile the kernel to only include the bits that I need, and so I don't include PPP...

Hi I followed the instructions on the Asterisk website for download and building Asterisk. I checked out a fresh copy from the CVS tree as described and that went smooth, but when I try to build as described, I get a truckload of errors and I have absolutely no clue what this all means. Can anybody please give me some hints or perhaps provide a link to a pre-compiled version? thanks in

For those that have had X100P echo problems, it seems that somewhere just prior to Asterisk CVS-12/04/03-14:24:40 it has been fixed to where its hardly detectable for just a couple of seconds at the start of a call. (I use to have it rather bad for the first 15 seconds or so.) I'm using DECHO_CAN_MARK2 with KFLAGS+=-DAGGRESSIVE_SUPPRESSOR and echotraining=yes echocancel=yes

I do 'make pridump' from the libpri source directory and receive the following: # make pridump cc -o pridump pridump.o -L. -lpri -lzap -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g /usr/bin/ld: cannot find -lzap collect2: ld returned 1 exit status make: *** [pridump] Error 1 I am new to all of this, so I am sure I am missing something obvious, any help will be appreciated.

Greetings folks; I have a bit of a conundrum, and I can't tell if Asterisk is doing something daft, or whether I'm clean missing out why it's doing what it's doing. So, I have a dialplan that looks a little like this: -------------------- [start] include => dids include => everythingelse [dids] ; Test exten => 8378,1,SetCallerID(3015551212) exten => 8378,2,Hangup

After speaking with several people, and even participating in a forum of several other people with echo issues, I thought I'd share what we've done (well actually what our chief R&D engineer, Brett Bourn has done...) First let me say that normal cheapy PC hardware couldn't be made to function with out echo. We tried on both the single port Digium T1 card and the 4 port Digium T1

The echo canceller algorithms aren't doing anything. We get extreme echo during the conversation, it appears even before the call connects, the echo is there... This only happens with SIP to/from WCFXO (analog POTS). Looking at the Zaptel configuration: /etc/asterisk/zapata.conf: echocancel=yes echocancelwhenbridged=yes rxgain=0.8 txgain=0.8 (although none of the above options

People: Did you have seen this message before? noc2pbx*CLI> -- Executing Goto("SIP/-081363a0", "ivr1|2000|1") in new stack -- Goto (ivr1,2000,1) -- Executing Answer("SIP/-081363a0", "") in new stack -- Executing Wait("SIP/-081363a0", "1") in new stack -- Executing BackGround("SIP/-081363a0",

I install the Asterisk into a RedHat9, exactly like manual says, and I'm having the attached error message when try to install libpri. Please, help on it. -------------- next part -------------- [root@LinuxLab zaptel]# cd .. [root@LinuxLab src]# cd libpri/ [root@LinuxLab libpri]# make clean; make install Makefile:93: .depend: No such file or directory ./mkdep -Wall -Werror -Wstrict-prototypes

Hi, My configuration is pri----*(te405p)---iaxclient. My * version is 1.0.7 running on tyan dual opteron board. I have several problems. 1) inbound echo For outbound call(iaxclient-->pri), there is almost no echo. But for inbound(pri-->iaxclient), I can hear distinct echo. Can Sangoma a104 or digium te406p help this problem? 2)Today i received te406p. I know T1/E1 jumper. But how can i

Hi there, I am attempting to set up a simple BRI and SIP based platform using * with the quadbri card (it's not sharing an IRQ). I enclose my zaptel and zapata.conf files. For the inital test I'm simply trying to connect to the * demo menu. The drivers compile (with a few warning that I believe aren't important - see attachments). chan_zap comiles with the warning: chan_zap.c:

I used to get bad echo and also voice breaking up during a conversation, so I upgraded the machine (from a PII 300 to a Athlon 1.8GHz) and have resolved the voice breaking up issues but still seem to have a fairly bad echo on *both* sides of the conversation. Currently I am only using the system for outbound calls, so I am always calling from the digium USB port phone and out to the telco using a

I just rebuilt it and watched this time. What are the ? about ? [root@carol src]# cvs checkout zaptel libpri asterisk ? libpri/libpri.so.1.0 ? libpri/pri.lo ? libpri/prisched.lo ? libpri/q921.lo ? libpri/q931.lo ? asterisk/doc/api cvs server: Updating zaptel cvs server: Updating libpri cvs server: Updating asterisk cvs server: Updating asterisk/agi cvs server: Updating asterisk/apps cvs server:

Hi all, Please help me in installing Asterisk. I am getting the following error when trying to install Libpri [treepr at CDC5S3FB-174202 Asterisk]$ cd libpri-1.4.2 [treepr at CDC5S3FB-174202 libpri-1.4.2]$ make clean rm -f *.o *.so *.lo *.so.1 *.so.1.0 rm -f testprilib libpri.a libpri.so.1.0 rm -f pritest pridump rm -f .depend [treepr at CDC5S3FB-174202 libpri-1.4.2]$ make install gcc -Wall