similar to: native fax with asterisk?

For whom asked me support for capi devices, that's here: http://www.junghanns.net/asterisk/ I'm using a AVM B1 card. also AVM passive card (FRITZ!PCI) works.... Then is you use SuSe all is configured by yast... Hello, probably is a feature what I'm asking for but because of my inexperience to asterisk this is my question: I've configured CAPI ISDN to receive calls. When I

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

FYI to the list.... I gave up (for now) trying to make spandsp work with the digium TDM card. Instead, I signed up with www.trustfax.com at a cost of $9.95 per year plus $.10/page. Since we only deal with an estimated 120 pages per year, the total cost of about $22/year seemed like a very reasonable alternative. (At least until we can find out why the TDM card does not function properly with

Hi there, I have google'ed and wiki'ed for days now and get nowhere. I tried all the spandsp versions with all the recommended libtiff versions and the best I can get is: Rxfax works with spandsp-0.0.2pre21 and tiff-3.7.1 from source TxFax gives me some of the fax but it is messed up. I have done all the gain adjustments What I would like is for someone to answer me with what works for

List, how can I put fax server functionality on Asterisk? * as a reliable fax server for 500-1000 fax/day (mostly incoming)? Fax server should be like HylaFax, i.e. stable, low maintenance and functionality like receiving fax as email with PDF attachment, sending faxes per WHFC. Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN cards) shortens some faxes, or faxes loose lines,

Is it possible to do SIP<->Asterisk<->TDM in a single step with FFA? Or does FFA always use TIFF files? I'm using Free FFA on 1.6.2.15 and I want to be able to use SPA 2102 ATA's at the fax machines and send faxes directly over a PRI. Mark -- Mark Willis Star One Telecom Office: 1-800-889-7001 Cell: 210 880 5097 http://staronetel.com

Hi all, I have a problem: On my internal S0 where phones are connected via HFC I get all the number with a leading 0 (either from internal SIP phones or external dialins via CAPI). I don't know where to look for this 0. Any ideas? Greetings, Sven -- Sven Fischer (Dipl.-Phys.) - FACIT Consulting GmbH Hausinger Str. 6 - 40764 Langenfeld Tel: 02173/16700-55 Fax: 02173/16700-60

Hi, Anyone using SpanDSP with Digium TDM o TE cards to receive and email Faxes? Thanks, Javier Ergas R. Director General de Tecnolog?a Pibix Telefon?a IP http://www.pibix.cl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060615/ed77e5d1/attachment.htm

I tried this with no luck on the machine, seems the fax did not like even ulaw. Ended up just putting it inline, but of course, in a multi-line setup it could be a problem. Just a word of advice, get another line for it if you can. I fought for about a year with my pingtel ip phone over a wireless connection, now I got serious and got a normal line about 5 months ago. Much better off now...

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

hi everybody and thanks for replying to my previous posts! i have some questions about the new cards announced on digium's website: these cards are 1-4 fxs interfaces, meaning i can take 4 analog phone handsets w/standard rj11's and plug them in to dial via *, right? not until fxo is implemented (is it going to be? when?) can i plug analog phone lines in? if the ports are made fxo/fxs

Hi, currently I got the following problem: The system contains a HFC-PCI card, it's running without problems under zaphfc. Now this system also should send/receive faxes. Receiving faxes works with rxfax (spandsp) but txfax is not comfortable enough and doesnt bring the demanded results. So an older external ISDN modem and mgetty-sendfax is used for sending faxes. I'd like to send the

Not FAX over VoIP, but testing 2 FAX machines back to back ... The scenario is that a client has one of my asterisk VoIP only systems which they're happy with, but need to test FAX machines, so rather than plug in a TDM card with FXS ports, I'm suggesting something like a PAP2T device with 2 analogue ports registering to their asterisk box to use to send test faxes from one fax

Hello all. I have an ISDN passive card (HC HFC 2BDS0) using HiSAX driver (since this is a passive card, I can't use the CAPI driver... ). "All" I want is recieve faxes and store them on diferent folders depending the destination number. So far I was able to do a similar thing with voice (vbox), but what I really pretend is recieving faxes. My system is a SuSE 9.2 and has instaled

Hello, I need to detect both fax and answer machine, and it should be valuable that the detection will be run by the Diva card itself. So : - I read Diva Documentation, and I found that the Diva could send some specific DTMF, if I had "[..] enabled [this functionnality] by the application for a designated controller through a manufacturer request command 9 [...]", but I didn't

Hi, Since Carl has kindly provided us with fax support for CAPI based cards, we have been using it with much success. Today I have modified app_capiFax so that it now supports a dynamic CSID. The following example uses the DNID created by chan_capi on an AVM Fritz! card. * Receive a fax with CAPI API. * Usage : capiAnswerFax2(path_output_file.SFF|stationID) * * This function can be

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

Hi *, This is my first message to this list, so I hope I am not breaking any rule with my post. My question is the following: can I establish a voice connection over an ISDN interface by using a bluetooth dongle to connect to the ISDN access point? Here follow the details: I have compiled and configured asterisk. Everything seems fine except that when I configure asterisk to use the ISDN

Rich Adamson <radamson@routers.com> wrote: > >> I have been investigating on this list and found that faxing is not >> reliable between Zaptel >> cards and that Digium does not support nor >> recommend fax over the TDMXXB interfaces. >> >> Is this true ? Will fax not be reliable enough for my customer ? > > True... the TDM card (or its drivers)

Hi! Has someone ever used the sendfax option of new chan-capi to send fax? I need some help regarding the sff format: How can I generate sff format? I found sfftobmp, not nothing the other way round. Is there a nice way to get the sff out of an Windows application (like virtual printers for hylafax) or at least some scripts which produce the sff and the asterisk call file out of an pdf?