similar to: Zaptel 1.2.22 and 1.4.7 released

The Asterisk development team is pleased to announce the release of Zaptel 1.2.13. This release contains a large number of bug fixes, an important performance improvement for most Digium cards, and support for new Digium hardware and some significant improvements in the XPP driver for Xorcom's Astribank hardware. In detail: * A modification was made to the drivers for all Digium PCI cards

The Asterisk development team is pleased to announce the release of Zaptel 1.2.13. This release contains a large number of bug fixes, an important performance improvement for most Digium cards, and support for new Digium hardware and some significant improvements in the XPP driver for Xorcom's Astribank hardware. In detail: * A modification was made to the drivers for all Digium PCI cards

Running Asterisk 1.6.2.9, DAHDI 2.3.0.1, CentOS 5.5 (update to date as of a week ago), I've installed a Digium AEX800P with 2 X400M FXO Modules and 1 VPMADT032 Module, hooked up to 5 analog lines. I get the error message referenced in the subject in my dmesg output everytime I load / reload DAHDI using the command "system dahdi start/restart". When I make an outbound call over

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

I noticed the following came into cvs head yesterday: > Update of /usr/cvsroot/zaptel > In directory mongoose.digium.com:/tmp/cvs-serv2118 > > Modified Files: > fxotune.c wctdm.c wctdm.h > Log Message: > More TDM card echo API modifications. Making the fxotune program automatically > find the correct coefficients for the module. Lots of neat stuff. I did a complete

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.5.0 DAHDI-Linux 2.5.0, DAHDI-Tools 2.5.0 and DAHDI-Linux-Complete 2.5.0+2.5.0 are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.5.0 DAHDI-Linux 2.5.0, DAHDI-Tools 2.5.0 and DAHDI-Linux-Complete 2.5.0+2.5.0 are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

I am currently running Asterisk 1.2.8, on an AMD Sempron 3100+ (ASUS K8N Nforce based board). I am using a Digium wctdm24xxp to terminate 8 (2x quad) FXO lines. Using ztmonitor (From zapata) I cannot see that there is any registerable incoming volume from these lines. I've been running them at rxgain = 25 (zapata.conf) to make the audio audible, however this creates poor call quality issues

The Asterisk and Zaptel development teams have released Zaptel version 1.4.1. This release contains a number of new features, along with some minor updates required for compatibility with Asterisk 1.4.2. The new features include: - Support for the Digium Wildcard TE120P T1/E1/J1 card - Support for the Digium Wildcard TDM800P analog card - Support for the Digium Wildcard TC400B transcoder card -

The Asterisk and Zaptel development teams have released Zaptel version 1.4.1. This release contains a number of new features, along with some minor updates required for compatibility with Asterisk 1.4.2. The new features include: - Support for the Digium Wildcard TE120P T1/E1/J1 card - Support for the Digium Wildcard TDM800P analog card - Support for the Digium Wildcard TC400B transcoder card -

I try to compile zaptel, without much success. I followed the guidelines in http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation making dependencie results in: asterisk:/usr/src/linux # make dep *** Warning: make dep is unnecessary now. and make tells me make[1]: *** No rule to make target `modules'. Stop. asterisk:/usr/src/zaptel # make clean rm -f torisatool makefw tor2fw.h rm -f

Anyone seen this and know how to fix it? (note the Assembler messages at the end). Thanks in advance: server# make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

This may be commonly known but I haven't come across it so here goes, maybe it'll help someone: I have terrible echo with asterisk 1.2, zaptel 1.2.12, and a TDM400P with 1 FXS and two FXO modules. The Mark2 echo canceller with Aggressive turned on was the only setting that would make it acceptable. I found fxotune with this zaptel version to be broken. I pulled the latest fxotune.c

Hi, I made a big mistake on a Centos 4.2 box - I forgot to exclude the kernel from updating. Now zaptel will not do a "make linux26" see below. Is there a way to roll this back or is there a patch to get Zaptel to compile? I have a link to the modules using 'ln -s /lib/modules/uname -r/build linux-2.6" so that I did not have to specifiy the kernel version directly. ....

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0-rc1 DAHDI-Tools-v2.9.0-rc1 dahdi-linux-complete-2.9.0-rc1+2.9.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0-rc1 DAHDI-Tools-v2.9.0-rc1 dahdi-linux-complete-2.9.0-rc1+2.9.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support