similar to: Video Recording

I have this old memory that the kernels used are a hodge podge of backports etc. So for a kernel-smp-2.6.9-55.0.9.EL should I use 0.4.10? Quoted from http://ivtvdriver.org/index.php/Download: The latest stable releases can be found here. Currently this is version 0.4.10 for kernels <= 2.6.15, version 0.6.7 for kernel 2.6.16, version 0.7.4 for kernel 2.6.17, version 0.10.6 for kernels >=

Hi, I'm experiencing an issue with my x86_64 machine containing a Hauppauge PVR-500 (ivtv) and a Digium TDM400p (wctdm, part of zaptel) PCI cards. Independently of each other both cards work fine, but once the wctdm driver is loaded and mythtv tries to record something on the PVR-500 the wctdm driver freaks out. The error message is see is "TDM PCI Master abort" printed over and

In order to experiment with the theora encoder, I bought a mini-DV camcorder a couple of weeks ago; a Panasonic PV-GS9 for $250. I wanted a mini-DV because it is claimed that capturing video from the camcorder to a computer over a firewire cable results in an exact copy of the recorded video. That was not my experience. The video I captured to my computer over the firewire cable, using both

Anyone have the Hauppauge WinTV-PVR-350 card running on CentOS 4.X? What about MythTV? One of my users asked me today to upgrade the kernel on his CentOS 4.4 system today as he claims that this card will only work on recent kernels (2.6.16 or newer). I haven't found any documentation to support this (the Linux page on the Hauppauge web site is hopelessly out of date; it mentions

We are finally going to replace our VHS-C Camcorder, with a Digital Camcorder, tomorrow. Looking for suggestions, for Digital Video Editor to use on CentOS 5.2. Preferably, something in the CentOS or RPMForge repositories and easy to use. TIA!

I am being given a digital camcorder. It uses Mini DV tapes and either connects via typical RCA cables (IE to a tv) or via FireWire. I don't have the brand on hand, but I was told it can be ripped to DV like any standard FireWire camcorder (I believe dvgrab will be sufficient). I just installed an older FireWire card I have that I used at one point in Fedora for my iPod. It was a PITA

Hi,all, I cannot get my network in domain1 work. Here is my configuration: in dom0: I have two network cards, the ip addrs are 141.213.10.110 and 192.168.0.4, respectively. 141.213.10.110 is an external IP and can access internet directly. The gateway should be 141.213.10.1. /etc/xen/vfp: the domain1 configuration file, I created domain1 using ''xm create vmid=1 -f

Question: 1: What is .Mod and .Tod video? 2: How to convert .Mod and .Tod video to AVI, MPG, WMV, MPEG? Answer: 1: .Mod and .Tod videos are mainly produced by digital harddisk camcorder such as JVC camcorder and so on. It is not common video formats and can only be played on some special players. 2:Tipard Mod Converter (http://www.tipard.com/mod-converter.html)Windows and Tipard Mod Converter for

In the discussion of having a freedom-friendly camcorder or other video device, we discussed the idea of using intra-only Theora video to make post-recording editing a much easier process, allowing things like frame-by-frame editing without the need to decode and reencode the video again, thus incurring loss. I was quite skeptical of the efficiency of intra-only Theora, and I had speculated that

Our discussion in the "Theora Camcorder" thread has been great, but I didn't see a direction evolve for action yet. So, I'd like to propose the creation of a community website that will be focused specifically on this kind of thing, partnered with the Xiph Foundation. I'm also more than happy to host said website, as I have more than ample server capacity for that. I just

Hello, I've been trying to get my n17 card to do SVIDEO tv out -------------------------- 01:00.0 VGA compatible controller: NVIDIA Corporation NV17 [GeForce4 MX 440] (rev a3) -------------------------- It is close to working. The first issue is that it was outputting PAL, and I found the module parameter and kernel boot config to change that: --------------------------

I create DVDs from camcorder output. In the past I've always just dragged the AUDIO_TS and VIDEO_TS folders into k3b and the disk has burned successfully. On this new box I tried to do the same, but k3b says that it 'Found invalid entry in the VIDEO_TS folder (AUDIO_TS). That seems to be utter nonsense, if it means that AUDIO_TS is inside the folder VIDEO_TS. If it doesn't,

Hello, Having a problem getting Centos to see my firewire connected camcorder. Here what I have thus far; Installed the kernek fron centos-plus and checked that libraw1394.x86_64 and libraw1394_8.x86_64 are installed Kernel i'm running is 2.6.9-34.106.unsupported here are some outputs from my machine; ~ $ lspci | grep -i firewire 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE

I have a Dell Inspiron 8100 laptop (or I8K) with a NVidia Geforce2 Go (or NV11) with an embedded CH7007A chip, and am seeing the following after getting ch7006 kernel driver/module loaded: # dmesg |grep ch7006 -i --- Snip --- [ 21.191147] nouveau [ I2C][0000:01:00.0] detected TV encoder: ch7006 [ 21.404731] ch7006 1-0075: ch7006_probe: [ 21.411672] ch7006 1-0075: Detected version

Patenting a mathematical formula is NOT creating a machine nor is it unique. For example. 2+2=4... apples + apples^2= given outcome. I want to patent this. It's stupid to patent something like that. The same is true for formula algorithms. Algorithms occur in nature. Thus should not be patented. Now, Volley G Mathison inventor of the Electropsychometer had a machine that he could patent. A

Hi. First of all, thanks for Xen. It''s terrific! I''m interested in doing memory oversubscription and am wondering if Xen can do this (now or in the future). For example, on a machine with 100MB available physical memory, can I: 1. Create a domain with a 90MB allocation 2. Inflate a balloon in that domain and return say 40MB back to Xen I know there are mechanisms for doing

Hi everyone, i''m currently try migrate my mythtv-server into an xen maschine but the ivtv-driver for my Hauppauge PVR350 doesn''t work. Now, a lot of googling and reading later i''m now here. I''ve an error which i can''t exactly allocate: is it an driver or an xen generated error ? I got with the ivtv-drivers following error: (0.2.x ivtv driver)

Hi Team I'm facing following error while running libvirt on ppc platfrom with cpu model as e5500.. 2015-07-15 06:30:37.307+0000: 3976: warning : virQEMUCapsInit:1001 : Failed to get host CPU 2015-07-15 06:30:37.642+0000: 3976: error : virFirewallApply:936 : out of memory 2015-07-15 06:31:16.451+0000: 3969: error : cpuNodeData:344 : this function is not supported by the connection driver:

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

Hi, If somebody is interested in having a crack at this (and think's they have a reasonable chance of succeeding) then there is a dev kit up for grabs. John, we actually already have a LM9638 (1280x1024, B/W) image sensor interfaced to the board. There is a colour version drop in replacement. We also have a color QVGA TFT hooked up for video out. So a good demo system would be to capture