similar to: gfx_passthu issue

Hi, I''m trying to pass an intel video card to a guest via VT-D. I got this to work once so i know my system can do it, but I can''t seem to replicate my success. Not sure if something changed in the bios(vt-d is still enabled there), or elsewhere. When I pass a device with gfx_passthru=0 (using config below), guest boots up and the vid card shows up at an incorrect pci id(ie not

I have been trying to setup GPU passthrough for a couple of days now with little luck. I''m hoping someone can shed some light as to where I may be going wrong or at least identify some genuine bugs. Essentially pci passthrough works for me but gpu passthrough doesn''t. My system is currently configured as follows (please ask if you need further details) Asrock Z77 e-Itx

I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to pass a Gigabyte HD 5450 graphics card to an HVM 64-bit Arch Linux domU. I have two Gigabyte HD 5450 graphics cards connected to my Gigabyte GA-X79-UP4 motherboard. I can pass the secondary card (the one the bios doesn’t show up on) to an HVM 32-bit Windows XP domU (I thought that would be the hard

Greetings, I''m attempting to do gfx_passthru with the primary graphics adapter (03:00.0), passing it to a guest. I can unbind it from the host but when I fire up the guest OS my monitor loses signal from the graphics card and that''s that. The GFX card is dual DVI, I''ve tried both slots. Host is Linux 2.6.32.14-1.2.105.xendom0.fc12.x86_64, Guest is Windows 7. PC is an

Hi, I migrate Xen4.0 to XEN4.1, and found XEN4.1 performance is not as good as 4.0.2. xm shutdown takes longer time, control thru libvirt take longer time, and since I''m testing PCI/VGA passthru, the "createdevice: pci" also take around 5~8 seconds comparing to 1 second in XEN4.0.2. below is my configuration, do you have any suggestions to make the performance better?

Hi all I''m trying to enable VGA passthrough in linux domU without success. I want to pass through AMD Radeon HD 4850 - 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] as a _primary_ VGA for the VM. Nothing is showing up on the monitor that I have connected to graphics card''s HDMI port. I have IOMMU enabled. I searched mailing lists

I am running Xen 4.0.1 with a 2.6.18-194.32.1.el5xen CentOS Dom0. I built and installed the Xen binaries from source. The systems boot successfully however I am having issues bring up DomUs. Here is config: name = ''xyz'' memory = 256 vcpus = 1 pae = 1 vnc = 1 vncunused = 1 disk = [ ''phy:/dev/vg1/xyz,hda,w'' ] vif = [

Xen 4.2.0-r1, Xen-tools-r3 from portage, USE=python*2_7, hvm, qemu Gentoo Kernel @ 3.7.10-r1, Passed through as secondary: 05:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Tahiti XT [Radeon HD 7970] 05:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Tahiti XT HDMI Audio [Radeon HD 7970 Series] Primary adapter: 06:00.0 VGA compatible controller: Advanced Micro Devices

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

I was trying to install a guest OS with the following command. $ virt-install -r 1024 --accelerate -n ubuntu-first-test -f /var/lib/libvirt/images/guest.img --cdrom /root/ubuntu-12.04-desktop-i386.iso --hvm and it says the following. Starting install... ERROR POST operation failed: xend_post: error from xen daemon: <Fault 3: ''ubuntu-first-test''> Domain installation

Hi, I am trying to VGA passthrough Intel HD Graphics 4600 IGD with Xen-unstable 4.4 changeset 27214 and Linux kernel 3.10.0 but was not successful. Details are as follows: =============================================================================================== teo-en-ming@intel-core-i5-4430-desktop:~$ sudo xl info [sudo] password for teo-en-ming: host :

I''ve just had my first attempt at getting VGA passthrough to work, and it crashed the machine. I''m trying to understand whether this is a problem with my hardware, configuration or a software problem. I''m running Xen 4.1.2 with Linux 3.1.2 The CPU is an Intel Core i5-650 http://ark.intel.com/products/43546/Intel-Core-i5-650-Processor-%284M-Cache-3_20-GHz%29 The Video

Hello. I've been tesing VGA passthrough using libvirt. However, My *Windows7*(64bit) Virtual Machine stopped at loading screen as soon as I installed graphic driver(*AMD Radeon HD 7750*) and then restarted the VM. How Can I use VGA passthrough technology in my *Windows7* VM? I attached my testing information(HW, system environment and settings, qemu log and so on..) Best Regards.

I am running Xen 4.0.1 with a 2.6.18-194.32.1.el5xen CentOS Dom0. I built and installed the Xen binaries from source. The systems boot successfully however I am having issues bring up DomUs. Here is config: name = ''xyz'' memory = 256 vcpus = 1 pae = 1 vnc = 1 vncunused = 1 disk = [ ''phy:/dev/vg1/xyz,hda,w'' ] vif = [

Dear xen-users. First of all, I''m not a linux-guru and a beginner with xen and completly new in this mailinglist. I''ve installed Xen on debian 6 and I was successful creating two machines: one for tests and "fogserver" (to test speed of writing computer images), both para-virtualisations.

Hi all, I had met with a question about vhd format when i install xen 4.2.0 source code on suse11_x86_64_sp2. execute steps: 1)Install fully suse 11 sp2 to host pc 2)Boot from Xen kernel menu 3)Download xen 4.2.0 source code from http://xen.org/download/index_4.2.0.html 4)Download bin86-0.16.19.tar.gz cmake-2.8.9.tar.gz Dev86src-0.16.19.tar.gz gettext-0.18.1.1.tar.gz

I''ve been using Xen strictly for PV for a while now, but I recently upgraded to hardware capable of HVM domUs. I''m trying to get a really basic HVM instance going so I can get my hands around making them work, in anticipation of using one to run a BSD to act as a firewall for other domUs on the machine. (I like PF.) Also, I might need run windows at some point, I suppose.

Hi, My Windows 8 Enterprise HVM domU configuration is as follows. I have to *disable* gfx_passthru, that is, gfx_passthru=0. Please take note. # XL domain configuration file for Windows 8 64-bit English HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En

Hi, My Windows 8 Enterprise HVM domU configuration is as follows. I have to *disable* gfx_passthru, that is, gfx_passthru=0. Please take note. # XL domain configuration file for Windows 8 64-bit English HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En

Hello, It looks like xen 4.1.2* has some problems with solaris 11 iso images too (s. further below log messages) hvm-solaris11.born2b3.net.cfg # --- kernel = ''/usr/lib64/xen-default/boot/hvmloader'' builder = ''hvm'' device_model= ''/usr/lib64/xen-4.1/bin/qemu-dm'' name = ''solaris11hvm.born2b3.net'' acpi =